Kv. referee-artikkelit
2012
Kv. referee-artikkelit
2011
-
Aha, Liisa; Salminen, K.; Hahto, Antti; Saarinen, H.; Mattila, Jouni; Siuko, M.; Semeraro, L.
DTP2 control room operator and remote handing operation designer responsibilities and information available to them. Fusion Engineering and Design.
86, 2011, 9-11, 2078-2081. http://dx.doi.org/10.1016/j.fusengdes.2011.03.040.
-
Choi, Ji-wung; Curry, Renwick E.; Elkaim, Gabriel H.
Minimizing Maximum Curvature of Quadratic Bezier Curves with a Tetragonal Concave Polygonal Boundary Constraint. Computer-Aided Design.
2011, 1-22. http://dx.doi.org/10.1016/j.cad.2011.10.008.
-
Hahto, Antti; Aha, Liisa; Nurminen, Teemu; Aaltonen, Ari; Heikkilä, Lasse; Mattila, Jouni; Siuko, Mikko; Saarinen, Hannu; Semeraro, Luigi.
Supervisory system for DTP2 remote handling operations. Fusion Engineering and Design.
86, 2011, 9-11, 2047-2050. http://dx.doi.org/10.1016/j.fusengdes.2011.02.051.
-
Heikkilä, Lasse; Saarinen, Hannu; Aha, Liisa; Viinikainen, Mikko; Mattila, Jouni; Hahto, Antti; Siuko, Mikko; Semeraro, Luigi.
Analysis of the new architecture proposal for the CMM control system. Fusion Engineering and Design.
86, 2011, 9-11, 2071-2074. http://dx.doi.org/10.1016/j.fusengdes.2011.04.057.
-
Kivelä, Tuomo; Saarinen, H.; Mattila, Jouni; Hämäläinen, V.; Siuko, M.; Semeraro, L.
Calibration and compensation of deflections and compliances in remote handling equipment conbfigurations. Fusion Engineering and Design.
86, 2011, 9-11, 2043-2046. http://dx.doi.org/10.1016/j.fusengdes.2010.12.032.
-
Mäkinen, H.; Järvenpää, J.; Valkama, Peetu; Väyrynen, Jukka; Amjad, Faraz; Siuko, M.; Mattila, Jouni; Semeraro, L.; Esque, S.
Concept design of the cassette toroidal mover. Fusion Engineering and Design.
86, 2011, 9-11, 2092-2095. http://dx.doi.org/10.1016/j.fusengdes.2011.04.060.
-
Muhammad, Ali; Mattila, Jouni; Vilenius, Matti; Siuko, Mikko; Semeraro, Luigi.
Advantage of redundancy in the controllability of remote handling manipulator. Fusion Engineering and Design.
86, 2011, 9-11, 1882-1885. http://dx.doi.org/10.1016/j.fusengdes.2010.12.022.
-
Nurmi, Jarmo; Mattila, Jouni.
Detection and isolation of leakage and valve faults in hydraulic systems in varying loading conditions, Part 1: Global sensitivity analysis. International Journal of Fluid Power.
12, 2011, 3, 41-51.
-
Nykänen, Ossi; Salonen, Jaakko; Markkula, Mikko; Ranta, Pekka; Rokala, Markus; Helminen, Matti; Alarotu, Vänni; Nurmi, Juha; Palonen, Tuija; Koskinen, Kari T.; Pohjolainen, Seppo.
What do information reuse and automated processing require in engineering design? Semantic process. Journal of Industrial Engineering and Management.
4, 2011, 4, 329.Universitat Politecnica de Catalunya. http://dx.doi.org/10.3926/jiem.329.
-
Pellikka, Matti; Ahola, Ville; Söderlund, Lasse; Uusitalo, Jukka-Pekka.
Genetic optimization of a fast solenoid actuator for a digital hydraulic valve. International Journal of Fluid Power.
12, 2011, 2, 49-56.
-
Saarinen, Hannu; Kivelä, Tuomo; Zhai, Likui; Hämäläinen, V.; Karjalainen, Juho-Pekka; Aha, Liisa; Heikkilä, Lasse; Mäkinen, H.; Järvenpää, J.; Kiviranta, S.; Krassi, B.; Viinikainen, Mikko; Siuko, M.; Mattila, Jouni; Esque, S.; Semeraro, L.
Results of CMM standalone tests at DTP2. Fusion Engineering and Design.
86, 2011, 9-11, 1907-1910. http://dx.doi.org/10.1016/j.fusengdes.2011.02.013.
-
Salminen, K.; Aha, Liisa; Saarinen, H.; Siuko, M.; Mattila, Jouni; Semeraro, L.
Categorization of ITER remote handling operations. Fusion Engineering and Design.
86, 2011, 9-11, 2075-2077. http://dx.doi.org/10.1016/j.fusengdes.2011.01.115.
-
Salonen, Jaakko; Nykänen, Ossi; Ranta, Pekka; Nurmi, Juha; Helminen, Matti; Rokala, Markus; Palonen, Tuija; Alarotu, Vänni; Koskinen, Kari; Pohjolainen, Seppo.
An implementation of a semantic, web-based virtual machine laboratory prototyping environment. Lecture Notes in Computer Science.
7032, 2011, 221-236. http://dx.doi.org/10.1007/978-3-642-25093-4_15. http://URN.fi/URN:NBN:fi:tty-2011111114875.
-
Tuominen, Janne; Muhammad, A.; Mattila, Jouni; Aha, Liisa; Saarinen, H.; Siuko, M.; Hamilton, D.; Semerero, L.
Command and Control application framework for interoperable heterogeneous ITER Remote Handling devices. Fusion Engineering and Design.
86, 2011, 9-11, 2067-2070. http://dx.doi.org/10.1016/j.fusengdes.2011.02.029.
-
Valkama, Peetu; Mattila, Jouni; Amjad, Faraz; Väyrynen, Jouni; Vilenius, Matti; Siuko, M.; Semeraro, L.; Esque, S.
On design and development of additional End-Effectors for the Cassette Multifunctional Mover. Fusion Engineering and Design.
86, 2011, 9-11, 1946-1949. http://dx.doi.org/10.1016/j.fusengdes.2011.04.039.
-
Väyrynen, Jukka; Mattila, Jouni; Vilenius, Matti; Ali, Muhammad; Valkama, Peetu; Siuko, Mikko; Semeraro, Luigi.
Predicting the runtime reliability of ITER Remote Handling maintenance equipment. Fusion Engineering and Design.
86, 2011, 9-11, 2012-2015. http://dx.doi.org/10.1016/j.fusengdes.2011.03.086.
-
Zhai, Likui; Mattila, Jouni; Saarinen, Hannu; Virvalo, Tapio.
Robust control of Cassette Multi-functional Mover for ITER remote handling tasks. Fusion Engineering and Design.
86, 2011, 9-11, 2008-2011. http://dx.doi.org/10.1016/j.fusengdes.2011.04.073.
-
Ziaei, Zahra; Hahto, Antti; Mattila, Jouni; Siuko, Mikko; Semeraro, Luigi.
Real-time markerless Augmented Reality for Remote Handling system in bad viewing conditions. Fusion Engineering and Design.
86, 2011, 9-11, 2033-2038. http://dx.doi.org/10.1016/j.fusengdes.2010.12.082.
Kv. referee-artikkelit
2010
-
Hahto, Antti; Mattila, Jouni; Koivisto, Hannu.
Automated object locator in a forest forwarder. Applied Artificial Intelligence
24, 2010, 7, 711-721. http://dx.doi.org/10.1080/08839514.2010.499501.
-
Huova, Mikko; Laamanen, Arto; Linjama, Matti.
Energy efficiency of three-chamber cylinder with digital valve system. International Journal of Fluid Power.
11, 2010, 3, 15-22.
-
Koskinen, Kari T.
Department of Intelligent Hydraulics and Automation, Tampere University of Technology, Finland. Journal of the Japan Fluid Power System Society.
41, 2010, 1, 35-40.
-
Uusitalo, Jukka-Pekka; Ahola, Ville; Söderlund, Lasse; Linjama, Matti; Juhola, Maarit; Kettunen, Lauri.
Novel bistable hammer valve for digital hydraulics. International Journal of Fluid Power.
11, 2010, 3, 35-44.
Kv. referee-artikkelit
2009
-
Aha, L., Saarinen, H., Tiitinen, J., Muhammad, A., Mattila, J., Siuko, M., Vilenius, M., Järvenpää, J., Irving, M., Damiani, C. & Semeraro, L.
Unified software development approach for the safety-critical ITER maintenance devices. Fusion Engineering and Design.
84, 2009, 2-6, pp. 369-374. http://dx.doi.org/10.1016/j.fusengdes.2009.02.054.
-
Esque, S., Mattila, J., Siuko, M., Vilenius, M., Järvenpää, J., Semeraro, L., Irving, M. & Damiani, C.
The use of digital mock-ups on the development of the divertor test platform 2. Fusion Engineering and Design.
84, 2009, 2-6, pp. 752-756. http://dx.doi.org/10.1016/j.fusengdes.2008.11.010.
-
Ghabcheloo, R., Aguiar, A. P., Pascoal, A., Silvestre, C., Kaminer, I. & Hespanha, J.
Coordinated path-following in the presence of communication losses and time delays. SIAM Journal on Control and Optimization.
48, 2009, 1, 234-265.
-
Kekäläinen, T., Mattila, J. & Virvalo, T.
Development and design optimization of water hydraulic manipulator for ITER. Fusion Engineering and Design.
Vol. 84, 2009, 2-6, pp. 1010-1014. http://dx.doi.org/10.1016/j.fusengdes.2009.01.016.
-
Leino, S-P., Lind, S., Poyade, M., Kiviranta, S., Multanen, P., Reyes-Lecuona, A., Mäkiranta, A. & Muhammad, A.
Enhanced industrial maintenance work task planning by using virtual engineering tools and haptic user interfaces. Lecture Notes in Computer Science.
5622, 2009, pp. 346-354. http://dx.doi.org/10.1007/978-3-642-02771-0_39.
-
Muhammad, A., Esque, S., Aha, L., Mattila, J., Siuko, M., Vilenius, M., Järvenpää, J., Irving, M., Damiani, C. & Semeraro, L.
Combined application of product lifecycle and software configuration management systems for ITER remote handling. Fusion Engineering and Design.
84, 2009, 2-6, pp. 1367-1371. http://dx.doi.org/10.1016/j.fusengdes.2008.11.056.
-
Nieminen, P., Esque, S., Muhammad, A., Mattila, J., Väyrynen, J., Siuko, M. & Vilenius, M.
Water hydraulic manipulator for fail safe and fault tolerant remote handling operations at ITER. Fusion Engineering and Design.
84, 2009, 2-6, pp. 1420-1424. http://dx.doi.org/10.1016/j.fusengdes.2008.12.002.
-
Saarinen, H., Tiitinen, J., Aha, L., Muhammad, A., Mattila, J., Siuko, M., Vilenius, M., Järvenpää, J., Irving, M., Damiani, C. & Semeraro, L.
Optimized hardware design for the divertor remote handling control system. Fusion Engineering and Design.
84, 2009, 2-6, pp. 1666-1670. http://dx.doi.org/10.1016/j.fusengdes.2008.11.050.
-
Siivonen, Lauri; Linjama, Matti; Huova, Mikko; Vilenius, Matti.
Jammed on/off valve fault compensation with distributed digital valve system. International Journal of Fluid Power.
10, 2009, 2, 73-82.
-
Takalo, V., Esque, S., Mattila, J., Vilenius, M., Järvenpää, J., Siuko, M., Semeraro, L., Irving, M. & Damiani, C.
Validation of divertor cassette locking system with a hydraulic jack tool. Fusion Engineering and Design.
84, 2009, 2-6, pp. 1808-1812. http://dx.doi.org/10.1016/j.fusengdes.2008.11.039.
-
Uusitalo, J-P., Söderlund, L., Kettunen, L., Linjama, M. & Vilenius, M.
Dynamic analysis of a bistable actuator for digital hydraulics. IET Science, Measurement & Technology.
3, 2009, 3, pp. 235-243. http://dx.doi.org/10.1049/iet-smt:20080124.
Kv. referee-artikkelit
2008
Kv. referee-artikkelit
2007
-
Beierer, P., Huhtala, K. & Vilenius, M.
Experimental study of the hydraulic circuit of a commercial common rail diesel fuel injection system. SAE Technical paper series.
2007-01-0487, 2007, 12 p.
-
Esque, S., Mattila, J., Saarinen, H., Siuko, M., Virvalo, T., Muhammad, A., Mäkinen, H., Verho, S., Timperi, A., Järvenpää, J., Palmer, J., Irving, M. & Vilenius, M.
The use of virtual prototyping and simulation in ITER maintenance device development. Fusion Engineering and Design.
82, 2007, pp. 2073-2080. http://dx.doi.org/10.1016/j.fusengdes.2007.02.030.
-
Herranen, M., Huhtala, K., Vilenius, M. & Liljenfeldt, G.
The electro-hydraulic valve actuation (EHVA) for medium speed diesel engines - develepment steps with simulations and measurements. SAE Technical Paper Series 2007-01-1289.
2007, 8 p.
-
Irving, M., Tammisto, J., Hodgson, E.R. & Hernandez, T.
Irradiation and testing of off-the-shelf seal materials for water hydraulic applications in ITER remote handling equipment. Fusion Engineering and Design.
82, 2007, pp. 1937-1941. http://dx.doi.org/10.1016/j.fusengdes.2007.05.031.
-
Palmer, J., Irving, M., Järvenpää, J., Mäkinen, H., Saarinen, H., Siuko, M., Timperi, A. & Verho, S.
The design and development of divertor remote handling equipment for ITER. Fusion Engineering and Design.
82, 2007, pp. 1977-1982. http://dx.doi.org/10.1016/j.fusengdes.2007.05.073.
Kv. referee-artikkelit
2005
-
Beierer, P., Huhtala, K., Lehto, E. & Vilenius, M.
Study of the impact of system characteristics on pressure oscillations in a common rail diesel fuel injection system. SAE Technical Paper Series 2005-01-0910.
2005, 14 p.
-
Linjama, M. & Vilenius, M.
Improved digital hydraulic tracking control of water hydraulic cylinder drive. International Journal of Fluid Power.
6, 2005, 1, pp. 29-39.
Kv. referee-artikkelit
2004
-
Varjus, S.H., Riipinen, H., Soini, S.M., Koskinen, K.T., Vilenius, M.J. & Puhakka, J.A.
Microbial growth control in water hydraulic systems by conventional filtration. Filtration+Separation.
41, 2004, pp. 41-47.
-
Virvalo, T., Lammila, M. & Lehto, E.
CAN bus applied on hydraulic computed force control. Transactions of the Institute of Measurement and Control.
26, 2004, 5, pp. 373-391.
Kv. referee-artikkelit
2003
-
Aaltonen, J., Huhtala, K., Vilenius, M.
Electrohydraulic Valvetrain for Extreme Value Diesel Engine. Sae Transactions, Journal of Engines, section 3.
111, 2003, 3, Society of Automotive Engineers, ING. s. 2140-2151.
-
Einola, K., Inberg, J., Virvalo, T.
Design and Control of Log Feeding Function in a Single-Grip Harvester. Sae Transactions, Journal of Commercial Vehicles, section 2.
111, 2003, 2, Society of Automotive Engineers, ING. s. 521-527.
-
Esque, S.
WINSIMU, Software for modelling and simulation of fluid power systems. International Journal of Fluid Power.
4, 2003, 1, Hamburg, Germany. Fluid Power Net International - FPNI. s. 67-71.
-
Esque, S., Raneda, A. & Ellman, A.
Techniques for studying a mobile hydraulic crane in virtual reality. International Journal of Fluid Power.
4, 2003, 2, s. 25-35.
-
Inberg, J., Virvalo, T., Einola, K.
Design Aspects of Timber Cutting Hydraulics in a Single-Grip Harvester. Sae Transactions, Journal of Commercial Vehicles, section 2.
111, 2003, 2, Society of Automotive Engineers, ING. s.512-520.
-
Linjama, M., Koskinen, K.T. & Vilenius, M.
Accurate trajectory tracking control of water hydraulic cylinder with non-ideal on/off valves. International Journal of Fluid Power.
4, 2003, 1, Hamburg, Germany. Fluid Power Net International - FPNI. s. 7-16.
-
Multanen, P., Rinkinen, J., Kangasniemi, H., Häppolä, K.
Improving the Filter Performance Under Variable Flow Conditions with Hydraulic Dampers. Sae Transactions, Journal of Commercial Vehicles, section 2.
111, 2003, 2, Society of Automotive Engineers, INC.. s. 469-475.
-
Raneda, A., Pessi, P., Siuko, M., Handroos, H., Palmer, J., Vilenius, M.
Utilization of virtual prototyping in development of CMM. Fusion Engineering and Design.
69, 2003, s. 183-186.
-
Riipinen, H., Varjus, S., Soini, S., Puhakka, J.A., Koskinen, K.T. & Vilenius, M.
Effects of microbial growth on filtration in water hydraulic system. SAE Transactions, Journal of Commercial Vehicle.
111, 2003, s. 148-153.
-
Siuko, M., Pitkäaho, M., Raneda, A., Poutanen, J., Tammisto, J., Palmer, J., Vilenius, M.
Water hydraulic actuators for ITER maintenance devices. Fusion Engineering and Design.
69, 2003, s. 141-145.
Kv. referee-artikkeli konferenssijulkaisussa tai kokoomateoksessa
2011
-
Aaltonen, Jussi; Alarotu, Vänni; Koskinen, Kari T.
Aircraft Hydraulic System Fault Finding and Troubleshooting Using On-Line Particle Counters. The Eight International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, 20-22 June 2011, Cardiff, Wales
2, 2011, Northamption. British Institute of Non-Destructive Testing. 1275-1282.
-
Aaltonen, Jussi; Koskinen, Kari T.
Detecting and eliminating the measurement error caused by free air in aircraft hydraulic system on-line particle counting. The Twelfth Scandinavian International Conference on Fluid Power, SICFP'11, May 18-20, 2011, Tampere, Finland
12, 2011, 1, Tampere. Scandinavian International Conference on Fluid Power. 229-240.
-
Ahopelto, Miika; Uusisalo, Jarno; Huhtala, Kalevi.
Low level control system architecture for autonomous wheel loader. In: Sairala, Harri; Koskinen, Kari T. (ed.). The Twelfth Scandinavian International Conference on Fluid Power, SICFP'11, May 18-20, 2011, Tampere, Finland
12, 2011, 2, Tampere. Scandinavian International Conference on Fluid Power. 365-376.
-
Alho, Pekka; Hahto, Antti; Mattila, Jouni; Aha, Liisa.
Planning of Dependable Remote Handling Control System Architecture for ITER. European Nuclear Young Generation Forum, ENYGF 2011, 17.5.-22.5.2011, Praha
2011, Prague. ENYGF. 1-7. http://URN.fi/URN:NBN:fi:tty-2011061714709. http://www.enygf.eu/download/02/02_02_Alho_paper.pdf.
-
Alho, Pekka; Mattila, Jouni.
Dependable Control Systems Design and Evaluation. Conference on Systems Engineering Research (CSER) 2011 Redondo Beach, California, USA, April 15-16, 2011.
2011, Redondo Beach, CA. CSER 2011.
-
Azpiazu, J.; Siltanen, S.; Multanen, Petteri; Mäkiranta, Ari; Barrena, N.; Diez, A.; Agirre,J.; Smith, T.
Remote support for maintenance tasks by the use of Augmented Reality: the ManuVAR project. Proceedings of the 9th Congress on Virtual Reality Applications, CARVI 2011
9, 2011, San Sebastian. Tecnalia. 1-6.
-
Backas, Joni; Ahopelto, Miika; Huova, Mikko; Vuohijoki, Antti; Karhu, Otso; Ghabcheloo, Reza; Huhtala, Kalevi.
IHA-machine: a future mobile machine. The Twelfth Scandinavian International Conference on Fluid Power, SICFP'11, May 18-20, 2011, Tampere, Finland
12, 2011, 1, Tampere. Scandinavian International Conference on Fluid Power. 161-176.
-
Backas, Joni; Huhtala, Kalevi.
Modelling the efficiencies of hydraulic pumps with neural networks. In: Sairala, Harri; Koskinen, Kari T. (ed.). The Twelfth Scandinavian International Conference on Fluid Power, SICFP'11, May 18-20, 2011, Tampere, Finland
12, 2011, 3, Tampere. Scandinavian International Conference on Fluid Power. 11-24.
-
Boström, Pontus; Huova, Mikko; Olszewska, Marta; Linjama, Matti; Heikkilä, Mikko; Sere, Kaisa; Walden, Marina.
Development of Controllers Using Simulink and Contract-Based Design. Chapter 8. In: Petre, Luigia; Sere, Kaisa; Troubitsyna, Elena (ed.). Dependability and Computer Engineering: Concepts for Software-Intensive Systems
2011, Hershey, PA. Engineering Science Reference. 151-169. http://dx.doi.org/10.4018/978-1-60960-747-0.
-
Elo, Lauri; Rinkinen, Jari; Halonen, Antti; Holopainen, Jyrki; Paavola, Jaakko; Penttinen, Markku.
Improving of effectiveness in hydraulic piling machine. The Twelfth Scandinavian International Conference on Fluid Power, SICFP'11, May 18-20, 2011, Tampere, Finland
12, 2011, 1, Tampere. Scandinavian International Conference on Fluid Power. 205-216.
-
Ghabcheloo, Reza.
Time-coordinated path following for hydaulic manipulators. In: Sairala, Harri; Koskinen, Kari T. (ed.). The Twelfth Scandinavian International Conference on Fluid Power, SICFP'11, May 18-20, 2011, Tampere, Finland
12, 2011, 2, Tampere. Scandinavian International Conference on Fluid Power. 377-392.
-
Hahto, Antti; Rasi, Teemu; Kivelä, Tuomo; Honkakorpi, Janne; Mattila, Jouni.
Service-oriented ad-hoc method for unforeseen scenarios. International Workshop on Robotics for Risky Interventions and Environmental Surveillance-Maintenance IARP RISE, C-ELROB. Fifth International Workshop on Robotics for risky interventions and Environmental Surveillance-Maintenance 5th IARP RISE’2011, 20-22 June, C-ELROB 2011, 21-24 June, Brussels – Leuven
2011, Leuven. IARP. 1-6.
-
Heikkilä, Mikko; Linjama, Matti.
Direct connection of digital hydraulic power management system and double acting cylinder - a simulation study. The Fourth Workshop on Digital Fluid Power, 21st-22nd November, 2011, Linz, Austria
4, 2011, Linz. DFP-Workshops. 59-74.
-
Helminen, Matti; Palonen, Tuija; Rokala, Markus; Ranta, Pekka; Mäkelä, Teemu; Koskinen, Kari T.
Virtual machine laboratory based on m1-technology. The Twelfth Scandinavian International Conference on Fluid Power, SICFP'11, May 18-20, 2011, Tampere, Finland
12, 2011, Tampere. Scandinavian International Conference on Fluid Power. 321-334.
-
Herranen, Mika; Siivonen, Lauri; Huhtala, Kalevi.
Engine gas exchange controlled by digital hydraulics. Proceedings of the 2nd International Conference on Measurement and Control Engineering, ICMCE 2011, October 21-22, 2011, Puerto Rico, USA
2, 2011, New York, NY. ASME Press. 1-7.
-
Hietala, Jukka-Pekka; Aaltonen, Jussi; Koskinen, Kari T.; Vilenius, Matti.
Aircraft hydraulic system model integration to fligh simulation model. The Twelfth Scandinavian International Conference on Fluid Power, SICFP'11, May 18-20, 2011, Tampere, Finland
12, 2011, 1, Tampere. Scandinavian International Conference on Fluid Power. 271-280.
-
Hietala, Jukka-Pekka; Aaltonen, Jussi; Koskinen, Kari T.; Vilenius, Matti.
Comparison between an aircraft speed brake actuator high order linear model and a semi-empirical non-linear model in real time simulation. AST 2011, 3rd International Workshop on Aircraft System Technologies, March 31 - April 1, 2011, Hamburg, Germany
3, 2011, Hamburg. Hamburg University of Technology. 65-71.
-
Honkakorpi, Janne; Vihonen, Juho; Mattila, Jouni.
Mems Sensor Module for Hydraulic Boom State Feeedback Control. In: Sairala, Harri; Koskinen, Kari T. (ed.). The Twelfth Scandinavian International Conference on Fluid Power, SICFP'11, May 18-20, 2011, Tampere, Finland
2011, Tampere. Scandinavian International Conference on Fluid Power. 393-404.
-
Karhu, Otso; Huhtala, Kalevi.
On-board data transfer of automated heavy machinery. Proceedings of the 8th JFPS International Symposium on Fluid Power, Okinawa 2011, October 25-28, 2011, Okinawa, Japan
2011, Okinawa. JFPS international Symposium on Fluid Power. 144-150.
-
Karjalainen, Juho-Pekka; Karjalainen, Reijo; Huhtala, Kalevi; Vilenius, Matti.
Comparison of measured and predicted dynamic properties of different commercial hydraulic fluids. In: Sairala, Harri; Koskinen, Kari T. (ed.). The Twelfth Scandinavian International Conference on Fluid Power, SICFP'11, May 18-20, 2011, Tampere, Finland
12, 2011, 2, Tampere. Scandinavian International Conference on Fluid Power. 281-296.
-
Karvonen, Matti; Heikkilä, Mikko; Huova, Mikko; Linjama, Matti; Huhtala, Kalevi.
Simulation study - improving efficiency in mobile boom by using digital hydraulic power management system. In: Sairala, Harri; Koskinen, Kari T. (ed.). The Twelfth Scandinavian International Conference on Fluid Power, SICFP'11, May 18-20, 2011, Tampere, Finland
12, 2011, 3, Tampere. Scandinavian International Conference on Fluid Power. 355-368.
-
Karvonen, Matti; Ketonen, Miikka; Linjama, Matti; Puumala, Veikko.
Recent advancements in miniature valve development. The Fourth Workshop on Digital Fluid Power, 21st-22nd November, 2011, Linz, Austria
4, 2011, Linz. DFP-Workshops. 90-103.
-
Kivelä, Tuomo; Mattila, Jouni.
Adaptive dead zone compensation of proportional mobile valve. In: Sairala, Harri; Koskinen, Kari T. (ed.). The Twelfth Scandinavian International Conference on Fluid Power, SICFP'11, May 18-20, 2011, Tampere, Finland
12, 2011, 3, Tampere. Scandinavian International Conference on Fluid Power. 411-422.
-
Kolu, Antti; Mantere, Petri; Vallas, Arvi; Hyvönen, Mika; Multanen, Petteri.
Method for automatic testing of control systems. In: Sairala, Harri; Koskinen, Kari T. (ed.). The Twelfth Scandinavian International Conference on Fluid Power, SICFP'11, May 18-20, 2011, Tampere, Finland
12, 2011, 2, Tampere. Scandinavian International Conference on Fluid Power. 111-127.
-
Koskinen, Kari T.; Vilenius, Matti.
Water Hydraulic. In: Totten, George E.; De Negri, Victor J. (ed.). Handbook of Hydraulic Fluid Technology
2011, 2. ed, Boca Raton,FL. CRC Press. 723-757.
-
Krogerus, Tomi; Koskinen, Kari T.
Testing of data analysis process in hydraulic forklift. In: Sairala, Harri; Koskinen, Kari T. (ed.). The Twelfth Scandinavian International Conference on Fluid Power, SICFP'11, May 18-20, 2011, Tampere, Finland
12, 2011, 3, Tampere. Scandinavian International Conference on Fluid Power. 105-234.
-
Krogerus, Tomi; Rokala, Markus; Koskinen, Kari T.
Sensitivity analysis of data analysis process in hydraulic forklift. Proceedings of the 8th JFPS International Symposium on Fluid Power, Okinawa 2011, October 25-28, 2011, Okinawa, Japan
2011, Okinawa. JFPS international Symposium on Fluid Power. 571-578.
-
Linjama, Matti.
Digital fluid power - state of the art. In: Sairala, Harri; Koskinen, Kari T. (ed.). The Twelfth Scandinavian International Conference on Fluid Power, SICFP'11, May 18-20, 2011, Tampere, Finland
12, 2011, 3, Tampere. Scandinavian International Conference on Fluid Power. 331-354.
-
Linjama, Matti; Lahtinen, Juha.
Model-based pressure control with digital valve system. The Fourth Workshop on Digital Fluid Power, 21st-22nd November, 2011, Linz, Austria
4, 2011, Linz. DFP-Workshops. 26-38.
-
Mäkiranta, Ari; Nuutinen, Pekka; Multanen, Petteri; Hyvönen, Mika; Leino, S-P., Kiviranta, S.; Vehviläinen, M.
Enhanced mobile machine assembly and maintainability evaluation using virtual and augmented reality. The Twelfth Scandinavian International Conference on Fluid Power, SICFP'11, May 18-20, 2011, Tampere, Finland
12, 2011, 1, Tampere. Scandinavian International Conference on Fluid Power. 295-304.
-
Markkula, Mikko; Rokala, Markus; Palonen, Tuija; Alarotu, Vänni; Helminen, Matti; Koskinen, Kari T.; Salonen, Jaakko; Nykänen, Ossi; Ranta, Pekka; Pohjolainen, Seppo.
Utilization of the hydraulic engineering design information for semi-automatic simulation model generation. In: Sairala, Harri; Koskinen, Kari T. (ed.). The Twelfth Scandinavian International Conference on Fluid Power, SICFP'11, May 18-20, 2011, Tampere, Finland
12, 2011, 3, Tampere. Scandinavian International Conference on Fluid Power. 443-458.
-
Multanen, Petteri; Hyvönen, Mika.
Utilization of R&D Simulators to Support the Maintenance of Mobile Work Machines. The Eight International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, 20-22 June 2011, Cardiff, Wales
2, 2011, Northamption. British Institute of Non-Destructive Testing. 1263-1274.
-
Nurmi, Jarmo; Mattila, Jouni.
A reduced-order unscented kalman filter independent of loading conditions for leakage fault detection and isolation in hydraulic systems. In: Sairala, Harri; Koskinen, Kari T. (ed.). The Twelfth Scandinavian International Conference on Fluid Power, SICFP'11, May 18-20, 2011, Tampere, Finland
12, 2011, 4, Tampere. Scandinavian International Conference on Fluid Power. 57-74.
-
Rinkinen, Jari.
Versatile Maintenance Solutions in Oil Related Systems. The Eight International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, 20-22 June 2011, Cardiff, Wales
2, 2011, Northamption. British Institute of Non-Destructive Testing. 1234-1249.
-
Rokala, Markus; Koskinen, Kari.
The effect of pc-rate on peek-made slipper behaviour in water hydraulic axial piston unit. The Twelfth Scandinavian International Conference on Fluid Power, SICFP'11, May 18-20, 2011, Tampere, Finland
12, 2011, 1, Tampere. Scandinavian International Conference on Fluid Power. 89-102.
-
Salminen, Karoliina; Siuko, M.; Karjalainen, J.; Sibois, Romain; Mattila, Jouni.
Status of DTP2 - Test Facility for ITER Divertor Maintenance. European Nuclear Young Generation Forum, ENYGF 2011, 17.5.-22.5.2011, Praha
2011, Prague. ENYGF. 1-6.
-
Sibois, Roman; Salminen, K.; Siuko, M.; Mattila, Jouni.
Verification and Validation of ITER Remote handling System Requirment Using Digital Mocks-Ups. European Nuclear Young Generation Forum, ENYGF 2011, 17.5.-22.5.2011, Praha
2011, Prague. ENYGF. 1-4.
-
Siivonen, Lauri; Linjama, Matti; Vilenius, Matti.
Fault Tolerance with digital Hydraulic Valve System. The Eight International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, 20-22 June 2011, Cardiff, Wales
2, 2011, Northamption. British Institute of Non-Destructive Testing. 1250-1262.
-
Uusisalo, Jarno; Huhtala, Kalevi.
Analysis of effect of remote control on usability of hydraulic mobile machines. Proceedings of the 8th JFPS International Symposium on Fluid Power, Okinawa 2011, October 25-28, 2011, Okinawa, Japan
2011, Okinawa. JFPS international Symposium on Fluid Power. 688-695.
-
Westerlund, Suvi; Mäkinen, Esa; Sinivaara, Mikko.
Self contained hydraulic module for cylinder driven applications. In: Sairala, Harri; Koskinen, Kari T. (ed.). The Twelfth Scandinavian International Conference on Fluid Power, SICFP'11, May 18-20, 2011, Tampere, Finland
12, 2011, 3, Tampere. Scandinavian International Conference on Fluid Power. 291-300.
-
Xia, Yu; Aaltonen, Jussi; Koskinen, Kari T.
Analysis and control of a single leg for hydraulically actuated quadruped robot. Scandinavian International Conference on Fluid Power SICFP. The Twelfth Scandinavian International Conference on Fluid Power, SICFP'11, May 18-20, 2011, Tampere, Finland
12, 2011, 1, Tampere. Scandinavian International Conference on Fluid Power. 149-160.
Kv. referee-artikkeli konferenssijulkaisussa tai kokoomateoksessa
2010
-
Erkkilä, Mikko; Jalkanen, T.; Lehto, Erkki; Virvalo, Tapio.
Negative load sensing. 7th International Fluid Power Conference (7th IFK), 22-24 March2010, Aachen, Germany
2010, 1-12.
-
Häusler, A.; Ghabcheloo, Reza; Pascoal, M.A.; Aguiar, A.P.
Multiple marine vehicle deconflicted path planning with currents and communication constraints. The 7th IFAC Symposium on Intelligent Autonomous Vehicles IAV'10, Lecce, Italy, September 2010
2010, 1-6.
-
Heikkilä, Mikko; Tammisto, Jyrki; Huova, Mikko; Huhtala, Kalevi; Linjama, Matti.
Experimental evaluation of a digital hydraulic power management system. In: Laamanen Arto; Linjama Matti (ed.). Proceedings of the Third Workshop on Digital Fluid Power, October 13-14 2010, Tampere, Finland
2010, 129-142.
-
Heikkilä, Mikko; Tammisto, Jyrki; Huova, Mikko; Huhtala, Kalevi; Linjama, Matti.
Experimental evaluation of a piston-type digital pump-motor-transformer with two independent outlets. In: Johnston D. N.; Plummer A. (ed.). Fluid Power and Motion Control (FPMC 2010), 15-17 September 2010, University of Bath, UK
2010, 83-97.
-
Herranen, Mika; Huhtala, Kalevi; Vilenius, Matti.
Optimization and energy consumption of electro-hydraulic valve actuation system through valve event timing range. In: Johnston D. N.; Plummer A. (ed.). Fluid Power and Motion Control (FPMC 2010), 15-17 September 2010, University of Bath, UK
2010, 433-445.
-
Herranen, Mika; Virvalo, Tapio; Huhtala, Kalevi; Glader, Tony; Kallio, Ilari.
Valve train with learning control features. 26th CIMAC World Congress on Combustion Engine Technology for Ship Propulsion Power Generation Rail Traction. June, 14-17, 2010, Bergen, Norway
2010, 1-10.
-
Honkakorpi, Janne; Mattila, Jouni.
Application of mems sensor fusion in hydraulic boom control. In: Karvinen, Timo; Keskinen, Erno (ed.). Proceedings of the Post-Graduate Workshop on Intelligent Machines and Transport Systems, May 3-7, 2010, CERN, Switzerland
2010, 1-11.
-
Huova, Mikko; Karvonen, Matti; Ahola, Ville; Linjama, Matti; Vilenius, Matti.
Energy efficient control of multiactuator digital hydraulic mobile machine. 7th International Fluid Power Conference (7th IFK), 22-24 March 2010, Aachen, Germany
2010, 1-12.
-
Huova, Mikko; Plöckinger, Andreas.
Improving resolution of digital hydraulic valve system by utilizing fast switching valves. In: Laamanen Arto; Linjama Matti (ed.). Proceedings of the Third Workshop on Digital Fluid Power, October 13-14 2010, Tampere, Finland
2010, 79-92.
-
Jaurola, Miikka; Huhtala, Kalevi.
A parameter study of a digital pump. In: Johnston D. N.; Plummer A. (ed.). Fluid Power and Motion Control (FPMC 2010), 15-17 September 2010, University of Bath, UK
2010, 203-215.
-
Karvonen, Matti; Juhola, Maarit; Ahola, Ville; Söderlund, Lasse; Linjama, Matti.
A miniature needle valve. In: Laamanen Arto; Linjama Matti (ed.). Proceedings of the Third Workshop on Digital Fluid Power, October 13-14 2010, Tampere, Finland
2010, 61-78.
-
Laamanen, Arto; Anttonen, Pekka; Linjama, Matti.
Digital flow control unit for controlling amount of water used for binding dust. In: Laamanen Arto; Linjama Matti (ed.). Proceedings of the Third Workshop on Digital Fluid Power, October 13-14 2010, Tampere, Finland
2010, 119-128.
-
Lähteenmäki, Teemu; Ijas, Mika; Mäkinen, Esa.
Characteristics of digital hydraulic pressure reducing valve. In: Johnston D. N.; Plummer A. R. (ed.). Fluid Power and Motion Control (FPMC 2010), 15-17 September 2010, University of Bath, UK
2010, 69-82.
-
Leino, S-P.; Vehviläinen, M.; Kiviranta, S.; Mäkiranta, Ari; Nuutinen, Pekka; Hokkanen, Ilkka; Multanen, Pasi; Rantanen, P.; Heikkilä, J.; Martikainen, T.
Collaboration between design and production by exploiting VR/AR and PLM - case Metso Minerals. In: Karwowski Waldemar; Salvendy, Gavriel (ed.). Proceedings of the 3rd International Conference on Applied Human Factors and Ergonomics (AHFE), 17-20 July 2010, Miami, Florida, USA
2010, 1-11.
-
Linjama, Matti; Huhtala, Kalevi.
Digital hydraulic power management system - towards lossless hydraulics. In: Laamanen Arto; Linjama Matti (ed.). Proceedings of the Third Workshop on Digital Fluid Power, October 13-14 2010, Tampere, Finland
2010, 5-22.
-
Muhammad, Ali; Valkama, Peetu; Siuko, Mikko; Mattila, Jouni; Vilenius, Matti.
Development of water hydraulic manipulator for the remote handling of heavy duty components. 7th International Fluid Power Conference (7th IFK), 22-24 March 2010, Aachen, Germany
2010, 1-12.
-
Muhammad, Ali; Vilenius, Matti.
Impedance control of redundant manipulators. In: Ivantysynova Monika (ed.). Proceedings of the 6th FPNI - PhD Symposium West Lafayette 2010, June 15-19 2010, Indiana, USA
1, 2010, 153-163.
-
Perukangas, Marko; Mäkinen, Esa.
Digital hydraulics in workboat propulsion control. In: Laamanen Arto; Linjama Matti (ed.). Proceedings of the Third Workshop on Digital Fluid Power, October 13-14 2010, Tampere, Finland
2010, 153-166.
-
Rinkinen, Jari.
Condition monitoring and in-line maintenance of oil in circulating lubrication system. In: Lahdelma Sulo; Palokangas Kari (ed.). Proceedings of the 3rd International Seminar Maintenance, Condition Monitoring and Diagnostics, September 29-30, 2010, Pohto, Oulu, Finland
2010, 136-151.
-
Rokala, Markus; Koskinen, Kari T.
Comparison of slipper structures in water hydraulic axial piston pump. 6th FPNI-PhD Symposium, June 15-19, 2010, West Lafayette, USA
2010,
-
Rokala, Markus; Sairiala, Harri; Koskinen, Kari T.
Driving feel generation of the mobile machine simulator with the water hydraulic 6-DOF motion platform. 7th International Fluid Power Conference (7th IFK), 22-24 March 2010, Aachen, Germany
2010, 1-12.
-
Tammisto, Jyrki; Huova, Mikko; Heikkilä, Mikko; Linjama, Matti; Huhtala, Kalevi.
Measured characteristics of an in-line pump with independently controlled pistons. 7th International Fluid Power Conference (7th IFK), 22-24 March 2010, Aachen, Germany
2010, 1-12.
-
Uusisalo, Jarno; Huhtala, Kalevi.
Experimental study on effects of remote control and control system distribution in hydraulic mobile machines. In: Karvinen, Timo; Keskinen, Erno (ed.). Proceedings of the Post-Graduate Workshop on Intelligent Machines and Transport Systems, May 3-7, 2010, CERN, Switzerland
2010, 1-11.
-
Uusitalo, Jukka-Pekka; Ahola, Ville; Söderlund, Lasse; Kettunen, Lauri.
New digital electrohydraulic valve package. In: Laamanen Arto; Linjama Matti (ed.). Proceedings of the Third Workshop on Digital Fluid Power, October 13-14, 2010, Tampere, Finland
2010, 39-59.
-
Zhai, Likui; Mattila, Jouni; Virvalo, Tapio.
Modelling and robust control of a hydraulic servo system. In: Karvinen Timo; Keskinen Erno (ed.). Proceedings of the Post-Graduate Workshop on Intelligent Machines and Transport Systems, May 3-7, 2010, CERN, Switzerland
2010, 156-167.
Kv. referee-artikkeli konferenssijulkaisussa tai kokoomateoksessa
2008
-
Aarnio, A., Elo, L., Mäkinen, E., Ukkonen, L., Soini, M., Sydänheimo, L., Vilenius, M. & Kivikoski, M.
Utilization of RFID and pressure sensor for intelligent hose condition monitoring. In: Johnston, D.N. & Plummer, A.R. (eds.). Fluid Power and Motion Control FPMC 2008, 10-12 September 2008, Bath, UK.
2008, pp. 27-40.
-
Huhtala, K., Suomela, J., Vilenius, M. & Halme, A.
Towards intelligent mobile machines - GIM research. In: Johnston, D.N. & Plummer, A.R. (eds.). Fluid Power and Motion Control FPMC 2008, 10-12 September 2008, Bath, UK.
2008, pp. 277-290.
-
Huhtala, K. & Vilenius, M.
Emission of combustion engines - also a challenge to hydraulics. Proceedings of the 6th International Fluid Power Conference Dresden, Fluid Power in Motion, 6iFK, April 1.-2.2008, Dresden.
2, 2008, pp. 423-438.
-
Ijas, M. & Mäkinen, E.
Improvement of total efficiency of hydrostatic transmission by using optimized control. In: Tanaka, Y. (ed.). Proceedings of the 7th JFPS International Symposium on Fluid Power, Toyama, September 15-18, 2008.
2008, pp. 271-276.
-
Javier, M., Karhu, O.I., Uusisalo, J.R.A. & Huhtala, K.J.
Detection of errors and failures using intelligent interface during a teleoperation process on skid steered mobile machine. 3rd IEEE Conference on Industrial Electronics and Applications ICIEA 2008, 3-5 June 2008, Singapore.
2008, pp. 326-330. http://dx.doi.org/10.1109/ICIEA.2008.4582533.
-
Karhu, O., Uusisalo, J., Honkakorpi, J. & Huhtala, K.
Autonomous excavation using hydraulic mobile machine retrofitted with electronic control system. In: Tanaka, Y. (ed.), Proceedings of the 7th JFPS International Symposium on Fluid Power, Toyama 2008, September 15-18, 2008.
2008, pp. 359-362.
-
Koskinen, K.T., Leino, T. & Riipinen, H.
Sustainable development with water hydraulics - possibilities and challenges. In: Tanaka, Y. (ed.). Proceedings of the 7th JFPS International Symposium on Fluid Power, September 15-18, 2008, Toyama, Japan.
2008, pp. 11-18.
-
Krogerus, T., Pietikäinen, J. & Koskinen, K.T.
Comparison of vibration and pressure signals for fault detection on water hydraulic proportional valve. In: Tanaka, Y. (ed.). Proceedings of the 7th JFPS International Symposium on Fluid Power, Toyama, September 15-18, 2008.
2008, pp. 691-696.
-
Krogerus, T., Sairiala, H. & Koskinen, K.T.
Water hydraulic forklift with intelligent condition monitoring system. Proceedings of the 51st National Conference on Fluid Power March 12-14, 2008, IFPE 2008, Las Vegas, USA.
2008, pp. 337-344.
-
Leino, S-P., Helin, K., Lind, S., Viitaniemi, H., Multanen, P., Mäkiranta, A., Lahtinen, J., Nuutinen, P., Heikkilä, J-M. & Martikainen, T.
Virtual engineering and remote operation in design, training and completon of demanding maintenance work tasks in challenging industrial plants (VIRVO) - MASIT15. In: Holviala, N. (ed.) MASI Programme 2005-2009, Yearbook 2008, Tekes Review.
228, 2008, TEKES. pp. 111-120.
-
Lind, S., Leino, S.-P., Viitaniemi, J., Helin, K., Multanen, P., Mäkiranta, A. & Heikkilä, J.
Development of a virtual environment for promoting safety in machine maintenance. In: Mondelo, P., Karwowski, W., Saarela, K., Hale, A. & Occipinti, E. (eds.) Proceedings of the 6th International Conference on Occupational Risk Prevention, ORP´2008, A Coruña, Galicia, Spain, May 14th, 15th & 16th, 2008.
2008, 14 p.
-
Linjama, M., Huova, M. & Vilenius, M.
Online minimization of power losses in distributed digital hydraulic valve system. Proceedings of the 6th International Fluid Power Conference Dresden, Fluid Power in Motion, 6iFK, April 1.-2.2008, Dresden.
1, 2008, pp. 157-171.
-
Linjama, M., Seppälä, J., Mattila, J. & Vilenius, M.
Comparison of digital hydraulic and traditional servo system in demanding water hydraulic tracking control. In: Johnston, D.N. & Plummer, A.R. (eds.). Fluid Power and Motion Control FPMC 2008, 10-12 September 2008, Bath, UK.
2008, pp. 393-403.
-
Moya, J. & Huhtala, K.
Synchronization and more intelligent control in teleoperation process on skid steered mobile machine. ICARCV 2008, 2008 10th International Conference on Control, Automation, Robotics & Vision, Hanoi, Vietnam, 17-20 December 2008.
2008, pp. 839-843. http://dx.doi.org/10.1109/ICARCV.2008.4795626.
-
Muhammad, A., Mattila, J., Virvalo, T. & Vilenius, M.
Force-based impedance control of hydraulic manipulators and its relationship with position-based impedance control. Proceedings of the 7th International Conference on Machine Automation ICMA2008, Service Robotics and Mechatronics, September 24-26, 2008, Awaji, Japan.
2008, pp. 327.
-
Muhammad, A., Mattila, J., Virvalo, T. & Vilenius, M.
Improved positioning accuracy for a water hydraulic manipulator with state feedback controller. Proceedings of the 7th International Conference on Machine Automation ICMA2008, Service Robotics and Mechatronics, September 24-26, 2008, Awaji, Japan.
2008, pp. 321-326.
-
Muhammad, A., Mattila, J., Virvalo, T. & Vilenius, M.
Improvement in feedback signal quality for water hydraulic manipulator. In: Johnston, D.N. & Plummer, A.R. (eds.). Fluid Power and Motion Control FPMC 2008, 10-12 September 2008, Bath, UK.
2008, pp. 135-148.
-
Multanen, P., Hyvönen, M., Ellman, A., Rantala, S. & Alanen, J.
Automatic testing in the integration phase of mobile work machine (TINAT) - MASIT31. In: Holviala, N. (ed.) MASI Programme 2005-2009, Yearbook 2008, Tekes Review.
228, 2008, TEKES. pp. 245-249.
-
Multanen, P., Hyvönen, M., Saarinen, J. & Vilenius, M.
Dynamic real-time simulation of intelligent mobile machines. Proceedings of the 27th IASTED International Conference Modelling, Identification, and Control, February 11-13, 2008, Innsbruck, Austria.
2008, 6 p.
-
Multanen, P., Mäkiranta, A., Helin, K. & Lind, S.
Improving the maintainability of elevators with virtual tools. In: Lustig, A. (ed.). Proceedings of ELEVCON THESSALONIKI 2008, Elevator Technology 17, June 2008, Thessaloniki, Greece.
2008, pp. 278-288.
-
Rinkinen, J.
Theoretical backround of a new reservoir design for circulating oil lubrication system. In: Vaal, PL. & Fuller, G. (eds.) Ninth International Tribology Conference of the South Africa Institute of Tribology, 2-4 April 2008, Tribology 2008, SAIT.
9, 2008, 12 p.
-
Rinkinen, J. & Elo, L.
Experiences and equipment in condition monitoring and in-line maintenance of oil. Proceedings of the 8th International CJC Sales Meeting, May 13th-15th, 2008, Denmark.
2008, 56 p.
-
Rokala, M., Calonius, O., Koskinen, K.T. & Pietola, M.
Study of lubrication conditions in slipper-swashplate contact in water hydraulic axial piston pump test rig. In: Tanaka, Y. (ed.). Proceedings of the 7th JFPS International Symposium on Fluid Power, September 15-18, 2008, Toyama, Japan.
2008, pp. 91-94.
-
Rokala, M., Calonius, O., Koskinen, K.T. & Pietola, M.
Tribological conditions between swashplate and slipper pad in variable displacement water hydraulic axial piston unit. Proceedings of the 6th International Fluid Power Conference Dresden, Fluid Power in Motion, 6iFK, April 1.-2.2008, Dresden.
2008, pp. 301-314.
-
Sairiala, H., Rokala, M. & Koskinen, K.T.
Control and actuator synchronization of water hydraulic 6-DOF motion platform. Proceedings of the 51st National Conference on Fluid Power March 12-14, 2008, IFPE 2008, Las Vegas, USA.
2008, pp. 345-350.
-
Siivonen, L., Linjama, M., Vilenius, M. & Anttonen, P.
Accurate flow control with digital valve system. Proceedings of the 51st National Conference on Fluid Power March 12-14, 2008, IFPE 2008, Las Vegas, USA.
2008, pp. 287-294.
-
Soini, M., Huvila, T., Mäkinen, E., Sydänheimo, L., Vilenius, M. & Kivikoski M.
Utilization of wireless battery-free sensors for hydraulic system condition monitoring. In: Toal, D. (ed.). Mechatronics 2008, Proceedings of the 11th Mechatronics Forum Biennial International Conference, University of Limerick, Ireland, 23-25.6.2008.
2008, 6 p.
-
Uusisalo, J., Karhu, O. & Huhtala, K.
A hand-held remote control as a user interface for a hydraulic mobile machine with an excavator. Proceedings of the 51st National Conference on Fluid Power March 12-14, 2008, IFPE 2008, Las Vegas, USA.
2008, pp. 405-411.
-
Uusisalo, J., Karhu, O. & Huhtala, K.
Assisting force feedback function for hand-held remote control of excavator. In: Tanaka, Y. (ed.). Proceedings of the 7th JFPS International Symposium on Fluid Power, Toyama, September 15-18, 2008.
2008, pp. 653-658.
-
Vilenius, J. & Huhtala, K.
Simulation model of hydraulic power transmission of teleoperated mobile machine and Development and Research Work of Advanced Velocity Control via Simulations. Proceedings of the 6th International Fluid Power Conference Dresden, Fluid Power in Motion, 6iFK, April 1.-2.2008, Dresden.
2008, pp. 85-100.
-
Virvalo, T.
Comparison of tracking controllers of hydraulic cylinder drive by simulations. Proceedings of the 7th International Conference on Machine Automation ICMA2008, Service Robotics and Mechatronics, September 24-26, 2008, Awaji, Japan.
2008, pp. 37-40.
-
Virvalo, T. & Mäkinen, E.
Comparing controllers in pneumatic cylinder motion control. Proceedings of the 6th International Fluid Power Conference Dresden, Fluid Power in Motion, 6iFK, April 1.-2.2008, Dresden.
2, 2008, pp. 289-304.
-
Vuohijoki, A., Hyvönen, M., Huhtala, K. & Vilenius, M.
Modelling of hydraulics and mechanics of a mobile machine. In: Johnston, D.N. & Plummer, A.R. (eds.). Fluid Power and Motion Control FPMC 2008, 10-12 September 2008, Bath, UK.
2008, pp. 105-118.
Kv. referee-artikkeli konferenssijulkaisussa tai kokoomateoksessa
2007
-
Aaltonen, J., Koskinen, K.T. & Vilenius, M.
Pump supply pressure fluctuations in the semi-closed hydraulic circuit with bootstrap type reservoir. In: Vilenius, J. & Koskinen, K.T. (eds.) The Tenth Scandinavian International Conference on Fluid Power, May 21-23, 2007, Tampere, Finland, SICFP'07.
1, 2007, Tampere. Tampere University of Technology. pp. 117-133.
-
Aaltonen, J., Koskinen, K.T., Vilenius, M. & Vaaraniemi, K.
Hydraulic fluid quality in aircraft hydraulic systems. In: Vilenius, J. & Koskinen, K.T. (eds.) The Tenth Scandinavian International Conference on Fluid Power, May 21-23, 2007, Tampere, Finland, SICFP'07.
1, 2007, Tampere. Tampere University of Technology. pp. 167-179.
-
Ahola, V., Linjama, M. & Vilenius, M.
High performance digital hydraulic servo system for linear cyclic motion. In: Vilenius, J. & Koskinen, K.T. (eds.) The Tenth Scandinavian International Conference on Fluid Power, May 21-23, 2007, Tampere, Finland, SICFP'07.
2, 2007, Tampere. Tampere University of Technology. pp. 275-287.
-
Beierer, P., Huhtala, K. & Vilenius, M.
Numerical analysis of the hydraulic circuit of a commercial common rail diesel fuel injection system. In: Johnston, D.N. & Plummer, A.R. (eds.) Power Transmission and Motion Control (PTMC 2007), University of Bath, UK, 12-14 September 2007.
2007, pp. 159-173.
-
Boström, P., Linjama, M., Morel, L., Siivonen, L. & Walden, M.
Design and validation of digital controllers for hydraulics systems. In: Vilenius, J. & Koskinen, K.T. (eds.) The Tenth Scandinavian International Conference on Fluid Power, May 21-23, 2007, Tampere, Finland, SICFP'07.
1, 2007, Tampere. Tampere University of Technology. pp. 227-241.
-
Elo, L., Mäkinen, E. & Vilenius, M.
The condition monitoring of hydraulics hoses. In: Vilenius, J. & Koskinen, K.T. (eds.) The Tenth Scandinavian International Conference on Fluid Power, May 21-23, 2007, Tampere, Finland, SICFP'07.
2, 2007, Tampere. Tampere University of Technology. pp. 423-432.
-
Erkkilä, M.
Dynamic model of CVT power train. In: Vilenius, J. & Koskinen, K.T. (eds.) The Tenth Scandinavian International Conference on Fluid Power, May 21-23, 2007, Tampere, Finland, SICFP'07.
1, 2007, Tampere. Tampere University of Technology. pp. 19-37.
-
Esque, S., Mattila, J., Saarinen, H., Aha, L., Tolonen, M., Muhammad, A., Virvalo, T., Timperi, A., Järvenpää, J., Siuko, M., Palmer, J., Irving, M. & Vilenius, M.
The use of virtual prototyping and simulation in iter CMMS/SCEE-mover control system development. In: Vilenius, J. & Koskinen, K.T. (eds.) The Tenth Scandinavian International Conference on Fluid Power, May 21-23, 2007, Tampere, Finland, SICFP'07.
3, 2007, Tampere. Tampere University of Technology. pp. 249-262.
-
Esque, S., Saarinen, H., Muhammad, A., Zhai, L., Tammisto, J., Seppälä, J., Mattila, J., Virvalo, T., Linjama, M. & Vilenius, M.
ITER divertor maintenance: Development of a control system for the remote handling of the divertor cassette mover. Proceedings of the 22nd IEEE/NPSS Symposium on Fusion Engineering - SOFE 07, June 17-21, Albuquerque, New Mexico, USA.
2007, 6 p.
-
Huvila, T. & Mäkinen, E.
On-line condition monitoring of a radial LSHT motor in a pulp washer application. In: Johnston, D.N. & Plummer, A.R. (eds.) Power Transmission and Motion Control (PTMC 2007), University of Bath, UK, 12-14 September 2007.
2007, pp. 15-26.
-
Ijas, M., Mäkinen, E. & Vilenius, M.
Hydrostatic transmission as a part of closed loop control. In: Vilenius, J. & Koskinen, K.T. (eds.) The Tenth Scandinavian International Conference on Fluid Power, May 21-23, 2007, Tampere, Finland, SICFP'07.
3, 2007, Tampere. Tampere University of Technology. pp. 151-160.
-
Kallio, I., Rantanen, P., Imperato, M., Antila, E., Sarjovaara, T., Larmi, M., Huhtala, K. & Liljenfeldt, G.
The design and operation of the fully controllable medium-speed research engine EVE. 25th CIMAC World Congress on Combustion Engine Technology for Ship Propulsion Power Generation Rail Traction, May 21-24, 2007, Vienna-Austria.
2007, Paper 163, 11 p.
-
Karhu, O., Moya, J., Uusisalo, J. & Huhtala, K.
Enabling autonomous functions on hydraulic excavator attachment. In: Vilenius, J. & Koskinen, K.T. (eds.) The Tenth Scandinavian International Conference on Fluid Power, May 21-23, 2007, Tampere, Finland, SICFP'07.
2, 2007, Tampere. Tampere University of Technology. pp. 35-45.
-
Karjalainen, J.-P., Karjalainen, R., Huhtala, K. & Vilenius, M.
Fluid dynamics - Comparison and discussion on system-related differences. In: Vilenius, J. & Koskinen, K.T. (eds.) The Tenth Scandinavian International Conference on Fluid Power, May 21-23, 2007, Tampere, Finland, SICFP'07.
2, 2007, Tampere. Tampere University of Technology. pp. 371-381.
-
Krogerus, T., Sairiala, H., Saarinen, M. & Koskinen, K.T.
Fault classification based on self-organizing maps in water hydraulic forklift. In: Vilenius, J. & Koskinen, K.T. (eds.) The Tenth Scandinavian International Conference on Fluid Power, May 21-23, 2007, Tampere, Finland, SICFP'07.
1, 2007, Tampere. Tampere University of Technology. pp. 61-76.
-
Laamanen, A., Linjama, M. & Vilenius, M.
On the pressure peak minimization in digital hydraulics. In: Vilenius, J. & Koskinen, K.T. (eds.) The Tenth Scandinavian International Conference on Fluid Power, May 21-23, 2007, Tampere, Finland, SICFP'07.
2, 2007, Tampere. Tampere University of Technology. pp. 107-121.
-
Leino, S-P., Evilä, T., Lind, S., Multanen, P., Mäkiranta, A. & Lahtinen, J.
Virtual engineering and remote operation in desing, training and completion of demanding maintenance work tasks in challenging industrial plants (Virvo) - MASIT15. In: Alakangas, E. & Taskinen, P. (eds.). MASI Technology Programme 2005-2009. Yearbook 2007. Tekes Technology Review.
207, 2007, Helsinki. Tekes. pp. 137-144.
-
Leino, T., Koskinen, K.T. & Vilenius, M.
On cavitation charasteristics of the shapes in water hydraulic seat valves. In: Vilenius, J. & Koskinen, K.T. (eds.) The Tenth Scandinavian International Conference on Fluid Power, May 21-23, 2007, Tampere, Finland, SICFP'07.
2, 2007, Tampere. Tampere University of Technology. pp. 61-73.
-
Linjama, M., Huova, M., Boström, P., Laamanen, A., Siivonen, L., Morel, L., Walden, M. & Vilenius, M.
Design and implementation of energy saving digital hydraulic control system. In: Vilenius, J. & Koskinen, K.T. (eds.) The Tenth Scandinavian International Conference on Fluid Power, May 21-23, 2007, Tampere, Finland, SICFP'07.
2, 2007, Tampere. Tampere University of Technology. pp. 341-359.
-
Linjama, M., Huova, M. & Vilenius, M.
On stability and dynamic characteristics of hydraulic drives with distributed valves. In: Johnston, D.N. & Plummer, A.R. (eds.) Power Transmission and Motion Control (PTMC 2007), University of Bath, UK, 12-14 September 2007.
2007, pp. 297-314.
-
Linjama, M. & Vilenius, M.
Digital hydraulics - Towards perfect valve technology. In: Vilenius, J. & Koskinen, K.T. (eds.) The Tenth Scandinavian International Conference on Fluid Power, May 21-23, 2007, Tampere, Finland, SICFP'07.
1, 2007, Tampere. Tampere University of Technology. pp. 181-196.
-
Mäkinen, E. & Virvalo, T.
Detection of cylinder and valve leakage in hydraulic position servo. In: Johnston, D.N. & Plummer, A.R. (eds.) Power Transmission and Motion Control (PTMC 2007), University of Bath, UK, 12-14 September 2007.
2007, pp. 53-66.
-
Mattila, J., Poutanen, J., Saarinen, H., Kekäläinen, T., Siuko, M., Palmer, J., Irving, M. & Timperi, A.
The design and development of iter divertor RH equipment @ DTP2 facility. In: Vilenius, J. & Koskinen, K.T. (eds.) The Tenth Scandinavian International Conference on Fluid Power, May 21-23, 2007, Tampere, Finland, SICFP'07.
3, 2007, Tampere. Tampere University of Technology. pp. 277-291.
-
Mikkola, J., Ahola, V., Lauttamus, T., Luomaranta, M., Linjama, M. & Vilenius, M.
Improving characteristics of on/off solenoid valves. In: Vilenius, J. & Koskinen, K.T. (eds.) The Tenth Scandinavian International Conference on Fluid Power, May 21-23, 2007, Tampere, Finland, SICFP'07.
3, 2007, Tampere. Tampere University of Technology. pp. 343-353.
-
Muhammad, A., Esque, S., Mattila, J., Tolonen, M., Nieminen, P., Linna, O., Vilenius, M., Siuko, M., Palmer, J. & Irving, M.
Development of water hydraulic remote handling system for divertor maintenance of ITER. Proceedings of the 22nd IEEE/NPSS Symposium on Fusion Engineering - SOFE 07, Albuquerque, New Mexico, June 17-21, 2007.
2007, 4 p.
-
Muhammad, A., Esque, S., Tolonen, M., Mattila, J., Nieminen, P., Linna, O. & Vilenius, M.
Water hydraulic teleoperation system for ITER. In: Vilenius, J. & Koskinen, K.T. (eds.) The Tenth Scandinavian International Conference on Fluid Power, May 21-23, 2007, Tampere, Finland, SICFP'07.
3, 2007, Tampere. Tampere University of Technology. pp. 263-276.
-
Muhammad, A., Mattila, J. & Vilenius, M.
Quantitative evaluation of a water hydraulic teleoperation system. Proceedings of the 8th International Workshop on Research and Education in Mechatronics, REM, 14-15 June 2007, Tallinn, Estonia.
2007, 6 p.
-
Palonen, T., Leino, T., Koskinen, K.T., Ranta, P., Punki, J. & Mäkelä, T.
Learning environment for training the forest machine mechanics. In: Vilenius, J. & Koskinen, K.T. (eds.) The Tenth Scandinavian International Conference on Fluid Power, May 21-23, 2007, Tampere, Finland, SICFP'07.
3, 2007, Tampere. Tampere University of Technology. pp. 69-83.
-
Rokala, M., Palonen, T., Sairiala, H. & Koskinen, K.T.
Control system development for the water hydraulic 6-DOF motion platform. In: Vilenius, J. & Koskinen, K.T. (eds.) The Tenth Scandinavian International Conference on Fluid Power, May 21-23, 2007, Tampere, Finland, SICFP'07.
1, 2007, Tampere. Tampere University of Technology. pp. 89-102.
-
Saarinen, J., Hyvönen, M., Suomela, J., Vilenius, J., Halme, A. & Huhtala, K.
Development of multi-machine remote control platform. In: Vilenius, J. & Koskinen, K.T. (eds.) The Tenth Scandinavian International Conference on Fluid Power, May 21-23, 2007, Tampere, Finland, SICFP'07.
2, 2007, Tampere. Tampere University of Technology. pp. 9-23.
-
Siivonen, L., Linjama, M., Huova, M. & Vilenius, M.
Fault detection and diagnosis of digital hydraulic valve system. In: Vilenius, J. & Koskinen, K.T. (eds.) The Tenth Scandinavian International Conference on Fluid Power, May 21-23, 2007, Tampere, Finland, SICFP'07.
1, 2007, Tampere. Tampere University of Technology. pp. 211-226.
-
Siivonen, L., Linjama, M., Huova, M. & Vilenius, M.
Pressure based fault detection and diagnosis of a digital valve system. In: Johnston, D.N. & Plummer, A.R. (eds.) Power Transmission and Motion Control (PTMC 2007), University of Bath, UK, 12-14 September 2007.
2007, pp. 67-79.
-
Stormi, S. & Rinkinen, J.
Diagnostics and visualization in hydraulic press. In: Vilenius, J. & Koskinen, K.T. (eds.) The Tenth Scandinavian International Conference on Fluid Power, May 21-23, 2007, Tampere, Finland, SICFP'07.
3, 2007, Tampere. Tampere University of Technology. pp. 293-305.
-
Suomela, J., Saarinen, J., Halme, A., Vilenius, M. & Huhtala, K.
GIM, towards the future worksite. Proceedings of the 26th IFAC Symposium on Intelligent Autonomous Vehicles, IAV 2007, Toulouse, France, 3-5 September 2007.
2007, France.
-
Tammisto, J., Mattila, J., Irving, M., Siuko, M. & Vilenius, M.
Radiation effects on friction and leakage properties of water hydraulic seals. In: Vilenius, J. & Koskinen, K.T. (eds.) The Tenth Scandinavian International Conference on Fluid Power, May 21-23, 2007, Tampere, Finland, SICFP'07.
2, 2007, Tampere. Tampere University of Technology. pp. 229-238.
-
Uusisalo, J., Vilenius, J., Vuohijoki, A., Hirvonen, S-M., Karhu, O. & Huhtala, K.
Portable remote control for teleoperated hydraulic mobile machine. In: Vilenius, J. & Koskinen, K.T. (eds.) The Tenth Scandinavian International Conference on Fluid Power, May 21-23, 2007, Tampere, Finland, SICFP'07.
3, 2007, Tampere. Tampere University of Technology. pp. 35-45.
-
Uusitalo, J.-P., Lauttamus, T., Linjama, M., Söderlund, L., Vilenius, M. & Kettunen, L.
Miniaturized bistable seat valve. In: Vilenius, J. & Koskinen, K.T. (eds.) The Tenth Scandinavian International Conference on Fluid Power, May 21-23, 2007, Tampere, Finland, SICFP'07.
3, 2007, Tampere. Tampere University of Technology. pp. 379-391.
-
Virvalo, T.
Influence of position sensor resolution on accuracy of pneumatic position servo. Proceedings of the Fifth International Symposium on Fluid Power Transmission and Control, ISFP 2007, June 6-8, 2007, Beidaihe, China.
2007, 4 p.
-
Virvalo, T. & Lehto, E.
CAN bus inside hydraulic position tracking control. In: Shih, M-C. et al. (eds.) Proceedings of 2nd International Forum on Systems and Mechatronics, IFSM 2007, December 3-6, 2007, NCKU, Tainan, Taiwan.
2007, Taiwan. Tsang Hai Book Publishing Co.. pp. 7-12.
-
Virvalo, T. & Mattila, J.
Follow-up accurary of water hydraulic swing. Proceedings of the Fifth International Symposium on Fluid Power Transmission and Control, ISFP 2007, June 6-8, 2007, Beidaihe, China.
2007, China. 5 p.
-
Virvalo, T. & Sun, W.
Energy storing and recovering in loading and un-loading cycles of forward loader. In: Johnston, D.N. & Plummer, A.R. (eds.) Power Transmission and Motion Control (PTMC 2007), University of Bath, UK, 12-14 September 2007.
2007, pp. 255-268.
Kv. referee-artikkeli konferenssijulkaisussa tai kokoomateoksessa
2006
-
Haikio, S., Huhtala, K., Vilenius, M. & Mäkitalo, J.
Improving effiency in a linear cyclic motion. In: Johnston, D.N. & Edge, K.A. (eds.) Power Transmission and Motion Control, PTMC 2006, University of Bath, UK, 13-15 September 2006.
2006, pp. 15-29.
-
Hyvönen, M., Vilenius, J., Vuohijoki, A. & Huhtala, K.
Mathematical model of the valve controlled skid steered mobile machine. The 2nd International Conference on Computational Methods in Fluid Power Technology FPNI'06, August 2-3, 2006 Aalborg University, Denmark.
2006, 10 p.
-
Karhu, O. I., Virvalo, T. K. & Kivikoski, M. A.
Wireless data transfer applied on hydraulic servo. In: Arai, E. & Arai, T. (eds). Mechatronics for Safety, Security and Dependability in a New Era.
2006, Amsterdam. Elsevier. pp. 297-300.
-
Karhu, O., Vilenius, J., Uusisalo, J. & Huhtala, K.
Developing intelligent hydraulic excavator. In: Johnston, D.N. & Edge, K.A. (eds.) Power Transmission and Motion Control, PTMC 2006, 13-15 September 2006.
2006, pp. 265-274.
-
Karhu, O., Vilenius, J., Uusisalo, J. & Huhtala, K.
Development of intelligent excavator. In: Ivantysynova, M. (ed.). Proceedings of the 4th FPNI - PhD Symposium, Sarasota 2006, June 13-17, 2006, Sarasota, FL, USA.
2, 2006, p. 369-377.
-
Karjalainen, J.-P., Karjalainen, R., Huhtala, K. & Vilenius, M.
High-pressure properties of hydraulic fluids - measuring and differences. In: Johnston, D.N. & Edge, K.A. (eds.) Power Transmission and Motion Control, PTMC 2006, University of Bath, UK, 13-15 September 2006.
2006, pp. 67-79.
-
Krogerus, T., Vilenius, J., Liimatainen, J. & Koskinen, K.T.
Applying self-organizing maps to condition monitoring of fluid power systems. In: Ivantysynova, M. (ed.). Proceedings of the 4th FPNI - PhD Symposium, Sarasota 2006, June 13-17, 2006, Sarasota, FL, USA.
1, 2006, pp. 311-323.
-
Laamanen, A., Linjama, M. & Vilenius, M.
The effect of coding method on pressure peaks in digital hydraulic system. In: Ivantysynova, M. (ed.). Proceedings of the 4th FPNI - PhD Symposium, Sarasota 2006, June 13-17, 2006, Sarasota, FL, USA.
1, 2006, pp.285-295.
-
Lammila, M., Virvalo, T. & Lehto, E.
Embedded distributed sub control system based on hybrid controller. In: Arai, E. et al. (eds.). Mechatronics for Safety, Security and Dependability in a New Era.
2006, pp. 339-342.
-
Lauttamus, T., Linjama, M., Nurmia, M. & Vilenius, M.
A novel seat valve with reduced axial forces. In: Johnston, D.N. & Edge, K.A. (eds.) Power Transmission and Motion Control, PTMC 2006, University of Bath, UK, 13-15 September 2006.
2006, pp. 415-427.
-
Mäkinen, E. & Virvalo, T.
Detection and influence of cylinder mounting backlash in a hydraulic position servo. In: Johnston, D.N. & Edge, K.A. (eds.) Power Transmission and Motion Control, PTMC 2006, University of Bath, UK, 13-15 September 2006.
2006, pp. 305-317.
-
Mattila, J., Siuko, M., Vilenius, M., Muhammad, A., Linna, O., Sainio, A., Mäkelä, A., Poutanen, J. & Saarinen, H.
Development of water hydraulic manipulator. Fusion Yearbook, Association Euratom-Tekes, Annual Report 2005, VTT Publications.
606, 2006, Espoo. VTT. pp. 61-66.
-
Muhammad, A., Mattila, J., Siuko, M. & Vilenius, M.
Force-based impedance control of hydraulic manipulators and its relationship with position-based impedance control. In: Johnston, D.N. & Edge, K.A. (eds.) Power Transmission and Motion Control, PTMC 2006, University of Bath, UK, 13-15 September 2006.
2006, pp. 291-303.
-
Palonen, T., Rokala, M., Sairiala, H., Uusi-Heikkilä, J., Hyvönen, M. & Koskinen, K.T.
Design and implementation of a water hydraulic 6-DOF motion platform for realtime simulators. In: Johnston, D.N. & Edge, K.A. (eds.) Power Transmission and Motion Control, PTMC 2006, University of Bath, UK, 13-15 September 2006.
2006, pp. 251-264.
-
Siivonen, L., Linjama, M. & Vilenius, M.
Fault tolerance of digital hydraulic valve system with separately controlled flow paths. In: Ivantysynova, M. (ed.). Proceedings of the 4th FPNI - PhD Symposium, Sarasota 2006, June 13-17, 2006, Sarasota, FL, USA.
2, 2006, pp. 331-343.
-
Siuko, M., Vilenius, M., Mattila, J., Muhammad, A., Linna, O., Sainio, A., Mäkelä, A., Poutanen, J., Verho, S., Mäkinen, H., Luomaranta, M. & Saarinen, H.
Provision of test models and software for the CMM system. Fusion Yearbook, Association Euratom-Tekes, Annual Report 2005, VTT Publications.
606, 2006, Espoo. VTT. pp. 58-60.
-
Siuko, M., Vilenius, M., Mattila, J., Verho, S., Mäkinen, H., Saarinen, H. & Keto, K.
CMM design finalization. Fusion Yearbook, Association Euratom-Tekes, Annual Report 2005, VTT Publications.
606, 2006, Espoo. VTT. pp. 60-61.
-
Uusi-Heikkilä, J. & Koskinen, K.T.
The characteristics of the one-piston radial pump with flow compensation piston mechanics. In: Ivantysynova, M. (ed.). Proceedings of the 4th FPNI - PhD Symposium, Sarasota 2006, June 13-17, 2006, Sarasota, FL, USA.
2, 2006, pp. 595-608.
-
Uusisalo, J., Vilenius, J., Karhu, O., Hyvönen, M. & Huhtala, K.
Electronically controlled hydraulic bucket stabilizer for mobile machine. In: Ivantysynova, M. (ed.). Proceedings of the 4th FPNI - PhD Symposium, Sarasota 2006, June 13-17, 2006, Sarasota, FL, USA.
2, 2006, p. 357-367.
-
Virvalo, T. & Mäkinen, E.
Detect of piston seal leakage in pneumatic position servo cylinder drive. In: Konarik, P. (ed.). Proceedings of the 19th International Conference on Hydraulics and Pneumatics, May 30-31, 2006 Prague, Czech Republic.
2006, pp. 186-194.
-
Virvalo, T. & Seppälä, J.
Cross utilizing degree of freedoms of boom in energy saving concept. In: Johnston, D.N. & Edge, K.A. (eds.) Power Transmission and Motion Control, PTMC 2006, University of Bath, UK, 13-15 September 2006.
2006, pp. 31-43.
Kv. referee-artikkeli konferenssijulkaisussa tai kokoomateoksessa
2005
-
Esque, S. & Ellman, A.
An efficient numerical method for solving the dynamic equations of complex fluid power systems. In: Johnston, D.N., Burrows, C.R. & Edge, K.A. (eds.). Bath Workshop on Power Transmission and Motion Control (PTMC 2005), 7-9 September 2005.
2005, pp. 179-191.
-
Karhu, O., Vilenius, J., Uusisalo, J., Moya Cid, J. & Huhtala, K.
Intelligent excavator for hydraulic mobile machine. Proceedings of ISARC 2005, 22nd International Symposium on Automation and Robotics in Construction, September 11-14, Ferrara, Italy.
2005, 5 p.
-
Karjalainen, J-P., Karjalainen, R., Huhtala, K. & Vilenius, M.
The dynamics of hydraulic fluids - significance, differences and measuring. In: Johnston, D.N., Burrows, C.R. & Edge, K.A. (eds.). Bath Workshop on Power Transmission and Motion Control (PTMC 2005), 7-9 September 2005.
2005, pp. 437-450.
-
Koivisto, H., Mattila, J., Mäkelä, A., Siuko, M. & Vilenius, M.
On pressure/force control of a water hydraulic joint. Proceedings of the Ninth Scandinavian International Conference on Fluid Power, SICFP'05, June 1.-3, 2005, Linköping, Sweden.
2005, 14 p.
-
Krogerus, T., Vilenius, J., Liimatainen, J., Hyvönen, M. & Koskinen, K.T.
Wireless proactive condition monitoring of pilot operated proportional valve. Proceedings of the Ninth Scandinavian International Conference on Fluid Power, SICFP'05, June 1.-3, 2005, Linköping, Sweden.
2005, 14 p.
-
Laamanen, A., Linjama, M. & Vilenius, M.
Pressure peak phenomenon in digital hydraulic systems - a theoretical study. In: Johnston, D.N., Burrows, C.R. & Edge, K.A. (eds.). Bath Workshop on Power Transmission and Motion Control (PTMC 2005), 7-9 September 2005.
2005, pp. 91-104.
-
Leino, T., Koskinen, K.T. & Vilenius, M.
Modelling of fluid dynamics in water hydraulic seat valve-investigation of pressure distribution. Proceedings of the Ninth Scandinavian International Conference on Fluid Power, SICFP'05, June 1.-3, 2005, Linköping, Sweden.
2005, 11 p.
-
Leino, T., Koskinen, K.T. & Vilenius, M.
Numerical and experimental investigation of cavitating flow in water hydraulic seat valve. In: Lu, Y. et al. (eds). Proceedings of the Sixth International Conference on Fluid Power Transmission and Control, ICFP'2005, April 5-8, Hangzhou, China.
2005, pp. 463-467.
-
Linjama, M., Tamminen, P., Andersson, B. & Vilenius, M.
Performance of the valvistor with digital hydraulic pilot control. Proceedings of the Ninth Scandinavian International Conference on Fluid Power, SICFP'05, June 1.-3, 2005, Linköping, Sweden.
2005, 14 p.
-
Linjama, M. & Vilenius, M.
Digital hydraulic tracking control of mobile machine joint actuator mockup. Proceedings of the Ninth Scandinavian International Conference on Fluid Power, SICFP'05, June 1.-3, 2005, Linköping, Sweden.
2005, 16 p.
-
Linjama, M. & Vilenius, M.
Energy-efficient motion control of a digital hydraulic joint actuator. Proceedings of the 6th JFPS International Symposium on Fluid Power, November 7-10, 2005, Tsukuba, Japani.
2005, pp. 640-645.
-
Linjama, M. & Virvalo, T.
Low-order robust controller for flexible hydraulic manipulators. In: Johnston, D.N., Burrows, C.R. & Edge, K.A. (eds.). Bath Workshop on Power Transmission and Motion Control (PTMC 2005), 7-9 September 2005.
2005, pp. 29-43.
-
Mäkelä, A., Mattila, J., Siuko, M. & Vilenius, M.
Feasibility study of chain drive in water hydraulic rotary joint. Proceedings of the 6th JFPS International Symposium on Fluid Power, November 7-10, 2005, Tsukuba, Japani.
2005, pp. 485-490.
-
Mäkelä, A., Mattila, J., Siuko, M. & Vilenius, M.
Flow vs. pressure control servovalves in force-based position control applications. Proceedings of the 6th JFPS International Symposium on Fluid Power, November 7-10, 2005, Tsukuba, Japani.
2005, pp. 155-160.
-
Mäkinen, E. & Virvalo, T.
Detecting and influence of cylinder mounting backlash in pneumatic position servo. Proceedings of 4th International Fluid Power Conference, (4.IFK), March 25-26, 2004, Dresden.
2005, pp. 511-522.
-
Mäkinen, E. & Virvalo, T.
Pneumatic positioning system of process valves. In: Lu, Y. et al. (eds). Proceedings of the Sixth International Conference on Fluid Power Transmission and Control, ICFP'2005, April 5-8, Hangzhou, China.
2005, pp. 315-319.
-
Moya, J., Vilenius, J., Karhu, O., Uusisalo, J. & Huhtala, K.
Data transmission of teleoperated skid steered mobile machine. Proceedings of the 15th International Symposium on Measurement and Control in Robotics, ISMCR 2005, 8-10 November 2005, Royal Military Academy, Brussels, Belgium.
2005, 10 p.
-
Muhammad, A., Mattila, J., Siuko, M. & Vilenius, M.
Experimental comparison of teleoperation schemes for hydraulic manipulators. Proceedings of the 6th JFPS International Symposium on Fluid Power, November 7-10, 2005, Tsukuba, Japani.
2005, pp. 437-442.
-
Pauniaho, L., Hyvönen, M., Erkkilä, R., Vilenius, J., Koskinen, K.T. & Vilenius, M.
Interactive 3D virtual hydraulics. In: Nicholson, P. et al. (eds.) IFIP TC3/WG3.3 Fifth Working Conference on eTRAIN Practices for Professional Onganizations (eTRAIN 2003), July 7-11, 2003, Pori, Finland.
2005, pp. 273-280.
-
Riipinen, H., Soini, S., Puhakka, J.A., Koskinen, K.T. & Vilenius, M.
Effect of tank design and two-phased filtration on cleanliness level of water hydraulic system. Proceedings of the 6th JFPS International Symposium on Fluid Power, November 7-10, 2005, Tsukuba, Japani.
2005, pp. 479-484.
-
Rusanen, H., Koivula, T. & Rinkinen, J.
Experiences on combining fault tree analysis and failure mode, effects and criticality analysis for fault diagnosis of hydrostatic transmission. In: Johnston, D.N., Burrows, C.R. & Edge, K.A. (eds.). Bath Workshop on Power Transmission and Motion Control (PTMC 2005), 7-9 September 2005.
2005, pp. 147-159.
-
Saarela, M., Mattila, J., Inberg, J., Luomaranta, M. & Vilenius, M.
Coordinated closed-loop motion control of a forest log-loader boom. Proceedings of the Ninth Scandinavian International Conference on Fluid Power, SICFP'05, June 1.-3, 2005, Linköping, Sweden.
2005, 17 p.
-
Sairiala, H., Koskinen, K.T. & Vilenius, M.
Control of water hydraulic manipulator with proportional valves. In: Johnston, D.N., Burrows, C.R. & Edge, K.A. (eds.). Bath Workshop on Power Transmission and Motion Control (PTMC 2005), 7-9 September 2005.
2005, pp. 107-115.
-
Siivonen, L., Linjama, M. & Vilenius, M.
Analysis of fault tolerance of digital hydraulic valve system. In: Johnston, D.N., Burrows, C.R. & Edge, K.A. (eds.). Bath Workshop on Power Transmission and Motion Control (PTMC 2005), 7-9 September 2005.
2005, pp. 133-146.
-
Siivonen, L., Linjama, M. & Vilenius, M.
The effect of fluid visconsity on performance of proportional directional valve and digital flow control unit. Proceedings of the Ninth Scandinavian International Conference on Fluid Power, SICFP'05, June 1.-3, 2005, Linköping, Sweden.
2005, 13 p.
-
Sun, W. & Virvalo, T.
Simulation study on a hydraulic-accumulator-balancing energy-saving system in hydraulic boom. Proceedings of the 50th National Conference on Fluid Power, March 16-18, 2005, Las Vegas, Nevada USA.
2005, pp. 371-381.
-
Uusisalo, J., Vilenius, J., Krogerus, T., Karhu, O. & Huhtala, K.
Automated bucket stabilizer for hydraulic mobile machine. Proceedings of ISARC 2005, 22nd International Symposium on Automation and Robotics in Construction, September 11-14, Ferrara, Italy.
2005, 7 p.
-
Virvalo, T.
Comparing control methods of feed force. In: Lu, Y. et al. (eds). Proceedings of the Sixth International Conference on Fluid Power Transmission and Control, ICFP'2005, April 5-8, Hangzhou, China.
2005, pp. 134-138.
-
Virvalo, T.
Comparing pneumatic and water hydraulic positioning system for process valves. Proceedings of the 6th JFPS International Symposium on Fluid Power, November 7-10, 2005, Tsukuba, Japani.
2005, pp. 455-460.
-
Virvalo, T.
Compensation of dead band and hysteresis of proportional valve. Proceedings of the 50th National Conference on Fluid Power, March 16-18, 2005, Las Vegas, Nevada USA.
2005, pp. 233-241.
-
Virvalo, T. & Inberg, J.
Comparing different control strategies of timber sawing process. In: Johnston, D.N., Burrows, C.R. & Edge, K.A. (eds.). Bath Workshop on Power Transmission and Motion Control (PTMC 2005), 7-9 September 2005.
2005, pp. 59-74.
-
Virvalo, T., Inberg, J. & Lammila, M.
Closed loop control improves timber sawing process. Proceedings of the Ninth Scandinavian International Conference on Fluid Power, SICFP'05, June 1.-3, 2005, Linköping, Sweden.
2005, 12 p.
-
Virvalo, T. & Laine, A.
Design, simulation and experimetal tests of hydraulic hydro-sounder. Proceedings of the 6th JFPS International Symposium on Fluid Power, November 7-10, 2005, Tsukuba, Japani.
2005, pp. 149-154.
-
Virvalo, T. & Sun, W.
Improving energy utilization in hydraulic booms - what it is all about. In: Lu, Y. et al. (eds). Proceedings of the Sixth International Conference on Fluid Power Transmission and Control, ICFP'2005, April 5-8, Hangzhou, China.
2005, pp. 55-65.
Kv. referee-artikkeli konferenssijulkaisussa tai kokoomateoksessa
2004
-
Beierer, P., Huhtala, K. & Vilenius, M.
Study of Various Fluid Flow Models and their Impact on Numerical Predictions for a High-Pressure Diesel Fuel Injector. Workshop Proceedings, 4 th International Fluid Power Conference (4. IFK) March 24, Dresden, 2004.
2004, s. 17-28.
-
Beiner, L., Perdereau, V. & Mattila, J.
Analysis and redundancy control of a LHD-loader: Kinematics, statics and trajectory planning. The 15th IASTED International Conference on modelling and simulation 2004, March 1-3. 2004, Marina del Rey, CA, USA.
2004,
-
Karhu, O., Virvalo, T. & Kivikoski, M.
Wireless data transfer applied on hydraulic servo. Proceedings of The 5th International Conference on Machine Automation, ICMA2004, 24-26. November 2004, Osaka, Japan.
2004, pp. 467-472.
-
Koskinen, K. T.
Water hydraulics-challenges and possibilities. Water Hydraulics the natural choice, 4th Bergen International Workshop on Advances in Technology, 13 May 2004, Bergen University College.
2004, pp. 4-18.
-
Laamanen, A., Linjama, M. & Vilenius, M.
PCM Control in Mobile Hydraulics. In: Codina Macia, E. et al. (Eds.). Proceedings of the 3rd FPNI-PhD Symposium on Fluid Power, Terrassa Spain, June 30-July 2, 2004.
2004, s. 311-320.
-
Laamanen, A., Siivonen, L., Linjama, M. & Vilenius, M.
Digital flow control unit-an alternative for a proportional valve?. Bath Workshop on Power Transmission and Motion Control (PTMC 2004).
2004, pp. 297-308.
-
Lammila, M., Virvalo, T. & Lehto, E.
Embedded distributed sub control system based on hybrid controller. Proceedings of The 5ht International Conference on Machine Automation, ICMA2004, 24-26. November, 2004, Osaka, Japan.
2004, pp. 505-509.
-
Linjama, M. & Vilenius, M.
Digital hydraulic control of a mobile machine joint actuator mockup. Bath Workshop on Power Transmission and Motion Control (PTMC 2004).
2004, pp. 145-158.
-
Rusanen, H. & Rinkinen, J.
Model Oriented Condition Monitoring of Hydrostatic Transmission. In: Codina Macia, E. et al. (Eds.). Proceedings of the 3rd FPNI-PhD Symposium on Fluid Power, Terrassa Spain, June 30-July 2, 2004.
2004, s. 489-500.
-
Sairiala, H., Koskinen, K. T., Vilenius, M.
Proportional Valves in Low-pressure Water Hydraulics. In: Codina Macia, E. et al. (Eds.). Proceedings of the 3rd FPNI-PhD Symposium on Fluid Power, Terrassa Spain, June 30-July 2, 2004.
2004, s. 501-508.
-
Siuko, M., Pitkäaho, M., Karjalainen, R., Kopperoinen, A., Verho, S., Koivisto, H., Kunttu, P., Raneda, A., Poutanen, J., Tammisto, J., Toivo, M., Tuominen, M., Virvalo,T. & Vilenius, M.
Vessel/in-vessel technology-remote handling. In: Karttunen, S. et al. (eds). Fusion Yearbook, Association Euratom-Tekes, Annual Report 2003, VTT Publications.
530, 2004, pp. 74-88.
-
Uusisalo, J., Raneda, A., Vilenius, J. & Huhtala, K.
Wireless starting system and emergency stop for teleoperated hydraulic mobile machine. Proceedings of IMECE04, 2004 ASME International Mechanical Engineering Congress and Exposition, November 13-20. 2004, Anaheim, California USA.
2, 2004, Anaheim, California USA. p. 9.
-
Vilenius, J., Raneda, A. & Huhtala, K.
Characteristics of teleoperated skid steered mobile machine. In: Codina Macia, E. et al. (Eds.). Proceedings of the 3rd FPNI-PhD Symposium on Fluid Power, Terrassa Spain, June 30-July 2, 2004.
2004, s. 587-598.
-
Vilenius, J., Raneda, A., Hyvönen, M., Uusisalo, J., Huhtala, K.
Valve controlled teleoperated skid streed mobile machine. Proceedings of IMECE04, 2004 ASME International Mechanical Engineering Congress and Exposition, November 13-20. 2004, Anaheim, California USA.
2, 2004,
-
Virvalo, T. & Inberg, J.
Feed force based constant torque control of hydraulic motor in chainsaw application. Bath Workshop on Power Transmission and Motion Control (PTMC 2004).
2004, pp. 173-186.
Kv. vertaisarvioimattomat artikkelit
2011
-
Rinkinen, Jari.
Versatile maintenance solutions in oil related systems. Condition Monitor.
2011, 296, 5-12.
-
Rinkinen, Jari; Lahtinen, Juha; Virta, Sampsa.
Recent advances in standardisation and education of fluid power in Finland. Maintworld, Maintenance & Asset Management.
3, 2011, 2, 14-18.
Kv. vertaisarvioimattomat artikkelit
2010
-
Erkkilä, Mikko; Viitasalo, Ville.
GVT-Getriebe mit hydrostatischer Verstelleinheit. Mobile Maschinen.
2010, 1/2010, 32-33.
-
Herranen, Mika; Huhtala, Kalevi; Vilenius, Matti.
The energy balance of the electro-hydraulic linear actuation system. Journal of Energy and Power Engineering.
4, 2010, 8, 57-63.
-
Virta, Pekka; Aaltonen, Jussi; Koskinen, Kari T.; Vilenius, Matti.
Experiences of monitoring the condition of military aircraft hydraulic systems. Condition Monitor, An International Newsletter.
2010, 280, 9-14.
Kv. vertaisarvioimattomat artikkelit
2009
-
Chaize, J. M., Robinson, D., Hardy, L., Mattila, J. & Hahto, A.
A mobile platform for remote inspection inside ESRF tunnel. The International Conference on Accelerator and Large Experimental Physics Control Systems ICALEPCS 2009, October 12-16, 2009, Kobe, Japan.
2009, 3 p.
Kv. vertaisarvioimattomat artikkelit
2008
-
Honkakorpi, J.
A review of automated boom control and vibration damping methods for mobile machines. In: Karvinen, T. & Keskinen, E. (eds.). Fourth Arctic-Mediterranean Post Graduate Workshop on Intelligent Machines and Transport Systems, June 23-27, 2008, Saariselkä, Finland.
2008, 6 p.
-
Huhtala, K.
Diesel engine hydraulics. In: Linjama, M. & Laamanen, A. (eds.). Proceedings of the First Workshop on Digital Fluid Power 3rd October, 2008, Tampere, Finland.
2008, pp. 129-140.
-
Laamanen, A.
The means of optimizing digital valve system. In: Linjama, M. & Laamanen, A. (eds.). Proceedings of the First Workshop on Digital Fluid Power 3rd October, 2008, Tampere, Finland.
2008, pp. 89-99.
-
Linjama, M.
Digital hydraulics research at IHA. In: Linjama, M. & Laamanen, A. (eds.). Proceedings of the First Workshop on Digital Fluid Power 3rd October, 2008, Tampere, Finland.
2008, pp. 7-30.
-
Linjama, M.
Digital schlägt Analog um 40%. Fluid.
2008, 7-8/2008, pp. 12-13.
-
Linjama, M. & Karvonen, M.
Digital microhydraulics. In: Linjama, M. & Laamanen, A. (eds.). Proceedings of the First Workshop on Digital Fluid Power 3rd October, 2008, Tampere, Finland.
2008, pp. 141-152.
-
Rinkinen, J. & Viertävä, J.
Nya standarder i Finland för hur industrihydrauliksystem skall upphandlas. Fluid Scandinavica, Specialtidningen för hydraulik/pneumatik.
2008, 1, pp. 35-36.
-
Siivonen, L.
Fault tolerant digital valve system and fault tolerant control. In: Linjama, M. & Laamanen, A. (eds.). Proceedings of the First Workshop on Digital Fluid Power 3rd October, 2008, Tampere, Finland.
2008, pp. 77-88.
-
Zhai, L. & Virvalo, T.
A survey on control of hydraulic servo systems. In: Karvinen, T. & Keskinen, E. (eds.). Fourth Arctic-Mediterranean Post Graduate Workshop on Intelligent Machines and Transport Systems, June 23-27, 2008, Saariselkä, Finland.
2008, 5 p.
Kv. vertaisarvioimattomat artikkelit
2005
-
Beierer, P.
Experimental and theoretical study of pressure oscillations in high-pressure hydraulic systems. In: Keskinen, E. & Montonen, J. (eds.). Third Arctic-Mediterranean Post Graduate Workshop on Intelligent Machines and Transport Systems, November 13-20, 2005, Seville, Spain.
2005, 8 p.
-
Laamanen, A.
Pressure peak minimization methods in digital hydraulic system. In: Keskinen, E. & Montonen, J. (eds.). Third Arctic-Mediterranean Post Graduate Workshop on Intelligent Machines and Transport Systems, November 13-20, 2005, Seville, Spain.
2005, 6 p.
-
Lakkonen, M., Koskinen, K. T. & Vilenius, M.
Low-pressure water hydraulics makes its move. Hydraulics & Pneumatics.
2005, pp. 40-42.
-
Rinkinen, J. & Koivula, T.
Experiences and proposals for condition monitoring methods of hydraulic valves. In: Lahdelma, S. & Palokangas, K. (eds.) Proceedings of Maintenance, Condition Monitoring and Diagnostics - International Seminar, September 28-29, 2005, Oulu, Finland.
2005, pp. 117-131.
-
Sairiala, H., Koskinen, K.T. & Vilenius, M.
2-Dof manipulator control with water hydraulic proportional valves. In: Keskinen, E. & Montonen, J. (eds.). Third Arctic-Mediterranean Post Graduate Workshop on Intelligent Machines and Transport Systems, November 13-20, 2005, Seville, Spain.
2005, 6 p.
-
Uusi-Heikkilä, J.
A radial piston pump with integrated flow compensating piston mechanism. In: Keskinen, E. & Montonen, J. (eds.). Third Arctic-Mediterranean Post Graduate Workshop on Intelligent Machines and Transport Systems, November 13-20, 2005, Seville, Spain.
2005, 8 p.
Kv. vertaisarvioimattomat artikkelit
2004
-
Laamanen, A., Linjama, M. & Vilenius, M.
Digital Hydraulics - Past and Future. Second Arctic-Mediterranean Post Graduate Workshop on Intelligent Machines and Transport Systems Proceedings, March 13- 21, 2004, Oulu-Kiruna-Narvik.
2004, 6 s.
-
Multanen, P.
Experience of Hydraulic Filter Performance with Variable Flow. Pamas International User Meeting, PIUM2004, Brussels 11th&12th of March 2004.
2004, 12 s.
-
Multanen, P. & Rinkinen, J.
Oil Contamination Control Using Automatic Particle Counters. Pamas International User Meeting PIUM2004, Brussels 11th &12th of March 2004.
2004, 12 s.
-
Palmer, J., Agostini, P., Gottfried, R., Irving, M., Martin, E., Siuko, M., Tesini, A. & Van Uffelen, M.
Remote maintenance of the ITER divertor. Proceedings 10th Robotics & Remote Systems for Hazardous Environments, March 28-31, 2004, Gainesville, Florida.
2004, pp. 29-34.
-
Sairiala, H., Koskinen, K. T. & Vilenius, M.
Control Valve Technology in Low-pressure Water Hydraulics. Second Arctic-Mediterranean Post Graduate Workshop on Intellitent Machines and Transport Systems Proceedings, March 13-21, 2004 Oulu-Kiruna-Narvik.
2004, 5 s.
-
Virvalo, T.
Mechatronic design for improving performance and efficiency of sawing process by adding a sensor and controller. In: Conrad, F. Workshop, Mechatronics Day 2004, 10.6.2004, Technical University of Denmark.
2004, 6 p.
Kv. vertaisarvioimattomat artikkelit
2003
-
Ahlstedt, H. & Rinkinen, J.
Use of fluid flow modelling in the development of mobile hydraulic oil tanks. The Eighth Scandianavian International Conference on Fluid Power. Proceedings of the conference, May 7-9, 2003, Tampere Finland.
2003, Tampere. s. 621-633.
-
Multanen, P., Rinkinen, J. & Niiranen, E.
Oil contamination control using automatic particle counters. Pamas Seminar, Nynäshamn, Sweden, 12.6.2003.
2003, Sweden. P I Petroleum Instrument & Service AB. 11 s.
-
Nykänen, T. & Ellman, A.
Methods for on-line condition monitoring of a fixed displacement hydraulic motor. In: Koskinen, K. T. & Vilenius, M. (eds.). Proceedings of the Eighth Scandinavian International Conference on Fluid Power, May 7-9.2003, Tampere, Finland.
2, 2003, Tampere. s. 951-961.
Kv. kirjat ja raportit
2011
Kv. kirjat ja raportit
2010
Kv. kirjat ja raportit
2008
Kv. kirjat ja raportit
2007
-
Vilenius, J. & Koskinen, K.T. (eds.).
The Tenth Scandinavian International Conference on Fluid Power, May 21-23, 2007, Tampere, Finland, SICFP'07.
1, 2007, Tampere. Tampere University of Technology. 293 p.
-
Vilenius, J. & Koskinen, K.T. (eds.).
The Tenth Scandinavian International Conference on Fluid Power, May 21-23, 2007, Tampere, Finland, SICFP'07.
2, 2007, Tampere. Tampere University of Technology. 453 p.
-
Vilenius, J. & Koskinen, K.T. (eds.).
The Tenth Scandinavian International Conference on Fluid Power, May 21-23, 2007, Tampere, Finland, SICFP'07.
3, 2007, Tampere. Tampere University of Technology. 430 p.
Kv. kirjat ja raportit
2006
Kv. kirjat ja raportit
2003
Kotim. referee-artikkelit
2003
-
Korpi, A., Manninen, A., Rinkinen, J. & Suontama, K.
Öljyjen kunnonvalvonta. Kunnossapito-lehti.
2003, 1, Kunnossapitoyhdistys ry.. 11 s.
-
Virvalo, T. & Mäkinen, E.
Ohjauksen ja säädön ero liikkeen toteutuksessa. Hydrauliikka ja pneumatiikka asemaservon toteutuksessa, osa II. Hydraulisen asemaservon suunnittelu, Fluid Finland- lehti.
2, 2003, 1, Visido Ky. s. 20-27.
-
Virvalo, T. & Mäkinen, E.
Vesihydraulisen asemaservon suunnittelu. Hydrauliikka ja pneumatiikka asemaservon toteutuksessa, osa III. Fluid Finland- lehti.
2, 2003, 2, Visido Ky. s. 24-31.
Kotim. referee-artikkeli konferenssijulkaisussa tai kokoomateoksessa
2011
-
Ahola, Ville.
Displacement controlled machines. Proceedings of the 5th GIM Scientific Workshop at Aalto University School of Electrical Engineering 29.-30.11.2011
2011, Espoo. Aalto University. 124-131.
-
Ahopelto, Miika.
Development process of control system. GIM - Generic Intelligent Machines, The 4th GIM Scientific Workshop, January 18-19, 2011, Tampere University of Technology, Tampere, Finland
4, 2011, Tampere. Tampere University of Technology. 1-7.
-
Backas, Joni.
Research of optimizing the prime mover and hydraulics of mobile machines. GIM - Generic Intelligent Machines, The 4th GIM Scientific Workshop, January 18-19, 2011, Tampere University of Technology, Tampere, Finland
4, 2011, Tampere. Tampere University of Technology. 1-5.
-
Choi, Ji-wung.
A Potential Field and Bug Compound Navigation Algorithm for Nonholonomic Wheeled Robots. Proceedings of the 5th GIM Scientific Workshop at Aalto University School of Electrical Engineering 29.-30.11.2011
2011, Espoo. Aalto University. 62-70.
-
Ghabcheloo, Reza.
GIMsim: Hardware in the loop simulator for autonomous hydraulic mobile machines. GIM - Generic Intelligent Machines, The 4th GIM Scientific Workshop, January 18-19, 2011, Tampere University of Technology, Tampere, Finland
4, 2011, Tampere. Tampere University of Technology. 1-13.
-
Heikkilä, Mikko.
New Power Management System for Fluid Power Applications. Proceedings of the 5th GIM Scientific Workshop at Aalto University School of Electrical Engineering 29.-30.11.2011
2011, Espoo. Aalto University. 131-138.
-
Herranen, Mika.
Energy distribution and optimization of the valve controlled actuation system. Proceedings of the 5th GIM Scientific Workshop at Aalto University School of Electrical Engineering 29.-30.11.2011
2011, Espoo. Aalto University. 111-124.
-
Huova, Mikko.
Energy efficient digital hydraulic valve control. GIM - Generic Intelligent Machines, The 4th GIM Scientific Workshop, January 18-19, 2011, Tampere University of Technology, Tampere, Finland
4, 2011, Tampere. Tampere University of Technology. 1-6.
-
Hyvönen, Mika; Ghabcheloo, Reza; Mantere, Petri; Kolu, Antti; Huhtala, Kalevi.
Autonomous pallet picking of GIM machine. Proceedings of the 5th GIM Scientific Workshop at Aalto University School of Electrical Engineering 29.-30.11.2011
2011, Espoo. Aalto University. 30-36.
-
Karhu, Otso.
On-board system integration of a mobile machine with automated functions operating in a multi-machine environment. GIM - Generic Intelligent Machines, The 4th GIM Scientific Workshop, January 18-19, 2011, Tampere University of Technology, Tampere, Finland
4, 2011, Tampere. Tampere University of Technology.
-
Karvonen, Matti.
Energy efficient digital hydraulic solutions for mobile booms. GIM - Generic Intelligent Machines, The 4th GIM Scientific Workshop, January 18-19, 2011, Tampere University of Technology, Tampere, Finland
4, 2011, Tampere. Tampere University of Technology. 1-4.
-
Krogerus, Tomi.
Recognition of Operating States of Mobile Machine. Proceedings of the 5th GIM Scientific Workshop at Aalto University School of Electrical Engineering 29.-30.11.2011
2011, Espoo. Aalto University. 70-80.
-
Linjama, Matti.
Hydraulic hybrids. GIM - Generic Intelligent Machines, The 4th GIM Scientific Workshop, January 18-19, 2011, Tampere University of Technology, Tampere, Finland
4, 2011, Tampere. Tampere University of Technology. 1-1.
-
Nurmi, Jarmo.
Detection and isolation of leakage and valve faults in hydraulic systems in varying loading conditions. Proceedings of the 5th GIM Scientific Workshop at Aalto University School of Electrical Engineering 29.-30.11.2011
2011, Espoo. Aalto University. 80-88.
-
Rasi, Teemu.
Autonomous fleet management utilizing OpenSplice DDS. Proceedings of the 5th GIM Scientific Workshop at Aalto University School of Electrical Engineering 29.-30.11.2011
2011, Espoo. Aalto University. 88-102.
Kotim. referee-artikkeli konferenssijulkaisussa tai kokoomateoksessa
2010
-
Ahola, Ville.
Displacement controlled hydraulic systems. Proceedings of the 3rd GIM Scientific Workshop, February 17-18, 2010, Aalto University School of Science and Technology. In: Halme Aarne; Pirttioja Teppo (ed.).
2010, Espoo. 1-13.
-
Huhtala, Kalevi.
Research platforms for future activities. In: Halme Aarne; Pirttioja Teppo (ed.). Proceedings of the 3rd GIM Scientific Workshop, February 17-18, 2010, Aalto University School of Science and Technology
2010, 1-16.
-
Jaurola, Miikka.
Valve parameter study in case of digital pump. In: Halme Aarne; Pirttioja Teppo (ed.). Proceedings of the 3rd GIM Scientific Workshop, February 17-18, 2010, Aalto University School of Science and Technology
2010, Espoo. 1-13.
-
Krogerus, Tomi.
Applying self-organizing maps to condition monitoring of hydraulic systems. Proceedings of the 3rd GIM Scientific Workshop, February 17-18, 2010, Aalto University School of Science and Technology. In: Halme Aarne; Pirttioja Teppo (ed.).
2010, 1-10.
-
Uusisalo, Jarno.
Experimental study on control system distribution and effects of remote control in hydraulic mobile machines. In: Halme Aarne; Pirttioja Teppo (ed.). Proceedings of the 3rd GIM Scientific Workshop, February 17-18, 2010, Aalto University School of Science and Technology
2010, 1-11.
Kotim. referee-artikkeli konferenssijulkaisussa tai kokoomateoksessa
2009
-
Esque, S.
A new approach for numerical simulation of fluid power circuits using Rosenbrock methods. In: Huhtala, K. & Uusi-Heikkilä, J. (eds.) The Second Workshop on Generic Intelligent Machines, May 14-15, 2009, Tampere University of Technology, Tampere, Finland.
2009, 9 p.
-
Ghabcheloo, R., Hyvönen, M., Uusisalo, J., Karhu, O., Järä, J. & Huhtala, K.
Autonomous motion control of a wheel loader. In: Huhtala, K. & Uusi-Heikkilä, J. (eds.) The Second Workshop on Generic Intelligent Machines, May 14-15, 2009, Tampere University of Technology, Tampere, Finland.
2009, 11 p.
-
Heikkilä, M.
Collaboration with a multitasking service robot performing skilled tasks. In: Huhtala, K. & Uusi-Heikkilä, J. The Second Workshop on Generic Intelligent Machines, May 14-15, 2009, Tampere University of Technology, Tampere, Finland.
2009, 11 p.
-
Hietala, Jukka-Pekka.
AMAD-painekytkimien laboratoriotestaus. In: Aaltonen, Jussi (ed.). Lentotekniikan rakennetutkimuksen neuvottelupäivät VII, 27.-28.8.2009, Tampere
2009, 1-14.
-
Huova, M. & Karvonen, M.
Digital hydraulics in working actions in mobile machines. In: Huhtala, K. & Uusi-Heikkilä, J. (eds.) The Second Workshop on Generic Intelligent Machines, May 14-15, 2009, Tampere University of Technology, Tampere, Finland.
2009, 9 p.
-
Järä, J. & Hyvönen, M.
Development of an intelligent control user interface for autonomous machines. In: Huhtala, K. & Uusi-Heikkilä, J. (eds.) The Second Workshop on Generic Intelligent Machines, May 14-15, 2009, Tampere University of Technology, Tampere, Finland.
2009, 8 p.
-
Karhu, O.
Autonomous excavation. In: Huhtala, K. & Uusi-Heikkilä, J. (eds.) The Second Workshop on Generic Intelligent Machines, May 14-15, 2009, Tampere University of Technology, Tampere, Finland.
2009, 10 p.
-
Karjalainen, J-P.
Effect of fluid properties on power system dynamics. In: Huhtala, K. & Uusi-Heikkilä, J. (eds.) The Second Workshop on Generic Intelligent Machines, May 14-15, 2009, Tampere University of Technology, Tampere, Finland.
2009, 6 p.
-
Laamanen, A.
Minimization of state transition uncertainty in the digital valve system. In: Huhtala, K. & Uusi-Heikkilä, J. (eds.) The Second Workshop on Generic Intelligent Machines, May 14-15, 2009, Tampere University of Technology, Tampere, Finland.
2009, 9 p.
-
Multanen, P. & Hyvönen, M.
Virtual tools for the designing and testing of modular machines. In: Huhtala, K. & Uusi-Heikkilä, J. (eds.) The Second Workshop on Generic Intelligent Machines, May 14-15, 2009, Tampere University of Technology, Tampere, Finland.
2009, 7 p.
-
Uusi-Heikkilä, J.
A new kind of piston pump to hydraulic power systems. In: Huhtala, K. & Uusi-Heikkilä, J. (eds.) The Second Workshop on Generic Intelligent Machines, May 14-15, 2009, Tampere University of Technology, Tampere, Finland.
2009, 12 p.
-
Virta, Pekka.
Hydrauliikan online -kunnonvalvonta. In: Aaltonen, Jussi (ed.). Lentotekniikan rakennetutkimuksen neuvottelupäivät VII, 27.-28.8.2009, Tampere
2009, 1-11.
Kotim. referee-artikkeli konferenssijulkaisussa tai kokoomateoksessa
2003
-
Korpi, A., Manninen, A., Rinkinen, J. & Suontama, K.
Öljyjen kunnonvalvonta. Teollisuusvoitelu, Kunnossapidon julkaisusarja.
8, 2003, KP-Media Oy. s. 155-174.
-
Rinkinen, J. & Vilenius, M.
Hydraulijärjestelmien suunnitteluperusteet. In: Airila, M. et al. Koneenosien suunnittelu, kappale 8.3.
4 p, 2003, WS Bookwell Oy, Porvoo 2003. Werner Söderström Osakeyhtiö 1997. s. 691-722.
Kotim. vertaisarvioimattomat artikkelit
2011
Kotim. vertaisarvioimattomat artikkelit
2010
-
Huhtala, Kalevi.
Koulutuksesta ja tutkimuksesta. Fluid Finland.
9, 2010, 3-4, 6-6.
-
Huhtala, Kalevi.
Reitinvalintaa rastilta seuraavalle. Fluid Finland.
2010, 3-4, 7-7.
-
Koskinen, Kari T.; Leino, Timo; Palonen, Tuija; Ranta, Pekka.
M1-teknologialla voidaan rakentaa virtuaalisia oppimisympäristöjä ja konelaboratorioita. Fluid Finland.
2010, 2/2010, 18-20.
-
Linjama, Matti.
Digitaalihydrauliikka tulee!. Metsäalan ammattilehti.
2010, 5, 88-89.
-
Linjama, Matti.
Matkaraportti: Digitaalihydrauliikan seminaari marraskuisessa Linzissä. Fluid Finland.
2010, 1/2010, 12-14.
-
Rinkinen, Jari.
Hydrauliikan komponenttipuhtausstandardien hyödyntäminen suomalaisessa konepajateollisuudessa. Fluid Finland.
2010, 1/2010, 18-23.
-
Rinkinen, Jari; Immonen, Aarno.
Hydraulikomponenttien käyttöikä. Fluid Finland.
2010, 1/2010, 8-11.
-
Rinkinen, Jari; Virta, Sampsa.
Kehitystä putkistopassin koulutusmateriaaliin. Fluid Finland.
2010, 1/2010, 28-30.
Kotim. vertaisarvioimattomat artikkelit
2009
-
Aaltonen, J.
Puhtauden mittauksen erityispiirteet sotilaslentokoneissa. In: Rinkinen, J., Multanen, P., Elo, L. & Niiranen, E. (eds.). PAMAS 2009 käyttäjäpäivät 10.-11.2.2009, Öljyjärjestelmien hiukkaslaskentakoulutus, Tampereen teknillinen yliopisto, Tampere, Finland.
2009, pp. 121-127.
-
Esque, S.
Väitöskirjan esittely. Nopeutta virtuaalisuunnitteluun uudella integrointialgoritmilla. Rosenbrockin menetelmä on uusi hydraulipiirien numeerisen simuloinnin lähestymistapa. Fluid Finland.
2009, 1/2009, s. 8-11.
-
Karjalainen, R.
Turvallisuus hydraulijärjestelmän öljynäytteenotossa ja mittauksessa. In: Rinkinen, J., Multanen, P., Elo, L. & Niiranen, E. (eds.). PAMAS 2009 käyttäjäpäivät 10.-11.2.2009, Öljyjärjestelmien hiukkaslaskentakoulutus, Tampereen teknillinen yliopisto, Tampere, Finland.
2009, pp. 116-120.
-
Linjama, M.
Digitaalisen mikrohydrauliikan sovellussatoa. Fluid Finland.
2009, 2/2009, s. 30-31.
-
Linjama, M.
Tavoitteena häviötön hydrauliikka. Fluid Finland.
2009, 3-4, s. 12-17.
-
Multanen, P., Niiranen, E. & Rinkinen, J.
Automaattinen öljyn epäpuhtauksien mittaus - hiukkausmittauksen periaatteet ja tekniikka v. 2009. In: Rinkinen, J., Multanen, P., Elo, L. & Niiranen, E. (eds.). PAMAS 2009 käyttäjäpäivät 10.-11.2.2009, Öljyjärjestelmien hiukkaslaskentakoulutus, Tampereen teknillinen yliopisto, Tampere, Finland.
2009, pp. 62-85.
-
Niiranen, E., Elo, L. & Multanen, P.
Öljynäytteiden hiukkaslaskennan tärkeimmät standardit. In: Rinkinen, J., Multanen, P., Elo, L. & Niiranen, E. (eds.). PAMAS 2009 käyttäjäpäivät 10.-11.2.2009, Öljyjärjestelmien hiukkaslaskentakoulutus, Tampereen teknillinen yliopisto, Tampere, Finland.
2009, pp. 47-61.
-
Rinkinen, J.
Hydraulikomponenttien ja -järjestelmien puhtausvalvontastandardien nykytila. Fluid Finland.
2009, 3-4, s. 32-38.
-
Rinkinen, J.
Hydraulikomponenttien puhtausvalvontastandardien nykytilanne. In: Rinkinen, J., Multanen, P., Elo, L. & Niiranen, E. (eds.). PAMAS 2009 käyttäjäpäivät 10.-11.2.2009, Öljyjärjestelmien hiukkaslaskentakoulutus, Tampereen teknillinen yliopisto, Tampere, Finland.
2009, pp. 134-160.
-
Rinkinen, J.
Puhtauden valvonta kehittyy. Promaint Kunnossapidon media.
2009, 5/2009, pp. 48-53.
-
Rinkinen, J.
Putkistopasseja TTY/IHA:n henkilökunnalle. Fluid Finland.
2009, 2/2009, s. 24-27.
-
Vilenius, M.
IHA digitaalihydrauliikalla maailman ykköseksi. Fluid Finland.
2009, s. 5.
Kotim. vertaisarvioimattomat artikkelit
2008
-
Elo, L.
FPMC Symposiumi Iso-Britanniassa. Fluid Finland.
2008, 3, s. 32-34.
-
Hyvönen, M., Multanen, P. & Huhtala, K.
Simulation as a tool for development of control and interface system module. 1st GIM Scientific Workshop at Helsinki University of Technology, 14.-15.8.2008.
2008, pp. 87-91.
-
Leino, T.
Virtauksen perusilmiöt vesihydrauliikan istukkaventtiilissä. Fluid Finland.
2008, 3, s. 12-15.
-
Linjama, M.
Digitaalihydrauliikan kuulumiset. Fluid Finland.
2008, 2, s. 8-10.
-
Linjama, M.
Digitaalihydrauliikan seminaarin suosio yllätti. Fluid Finland.
2008, 3, s. 36-37.
-
Riipinen, H.
Vesihydrauliikan kunnonvalvonta. Fluid Finland.
2008, s. 12-14.
-
Rinkinen, J. & Löppönen, M.
Etelä-Afrikan Tribologia 2008 -konferenssi. Fluid Finland.
2008, s. 20-23.
-
Sairiala, H. & Koskinen, K. T.
Vesihydrauliikan sovelluksia. Fluid Finland.
2008, s. 15-17.
Kotim. vertaisarvioimattomat artikkelit
2007
-
Immonen, A. & Rinkinen, J.
Hydraulikomponenttien käyttöikä. Kunnossapito.
21, 2007, 5, s. 26-30.
-
Koivula, T. & Rinkinen, J.
Liikkuvan kaluston kunnonvalvontaratkaisuja. Fluid Finland lehti.
6, 2007, 1 -2007, s. 6-9.
-
Rinkinen, J.
Öljyn kunnonvalvonta ja inline-kunnossapito sekä komponenttien online-diagnostiikka hydrauli- ja kiertovoitelujärjestelmissä. Kunnossapito.
6, 2007, 3, s. 6-14.
-
Rinkinen, J.
Parannuksia öljyjärjestelmien hiukkaslaskennassa, kunnossapidossa ja diagnostiikassa. Kunnossapito.
21, 2007, 3, s. 62-65.
-
Rusanen, H. & Rinkinen, J.
Vianetsintämenetelmiä hydraulijärjestelmille. Fluid Finland.
6, 2007, 2, s. 6-10.
-
Siivonen, L.
Digitaalihydrauliikan vikasietoisuus. Fluid Finland lehti.
6, 2007, 1 -2007, s. 14-17.
Kotim. vertaisarvioimattomat artikkelit
2006
-
Elo, L. & Rinkinen, J.
Hydrauliikan kunnonvalvonta-antureita liikkuvaa kalustoa varten. Fluid Finland -lehti.
2006, 8, s. 52-54.
-
Elo, L. & Rinkinen, J.
Hydrauliöljyn kunnonvalvontamenetelmät liikkuvassa kalustossa. Kunnossapitolehti.
20, 2006, 7, s. 18-21.
-
Karjalainen, R.
Vickers 20VQ-5 -siipipumpputesti testaa hydrauliikkaöljyjä. Kunnossapito.
2006, 8, s. 46-48.
-
Koivula, T., Rusanen, H. & Rinkinen, J.
Vikapuuanalyysillä vian alkulähteille. Kunnossapito.
2006, 2, s. 64-66.
-
Linjama, M.
Digitaalihydrauliikka. Fluid Finland.
5, 2006, 1, s. 14-19.
-
Mäkinen, E., Ijas, M., Huvila, T., Saha, M. & Elo, L.
Raumalla tutkitaan hydrauliikkaa. Kunnossapito.
2006, 6, s. 62-64.
-
Rinkinen, J. & Viertävä, J.
Teollisuushydraulijärjestelmän suunnittelu ja hankinta helpottuu. Kunnossapitolehti.
20, 2006, 6, s. 56-59.
Kotim. vertaisarvioimattomat artikkelit
2005
-
Koivula, T., Rusanen, H. & Rinkinen, J.
Vikapuuanalyysillä vian alkulähteille. Teollisuushydrauliikan vianetsintä seminaari 6.-7.4.2005 Tampere, Finland.
2005, 12 s.
-
Koskinen, K.T., Sairiala, H. & Riipinen, H.
Matalapainevesihydrauliikka - Potentiaalinen teknologia moniin sovellutuksiin. Fluid Finland.
4, 2005, 5, s. 6-9.
-
Muhammad, A.
Teleoperation of 1 dof hydraulic testbed with haptic interface. Proceedings of TUT Graduate School Seminar, April 21, 2005 Tampere Finland.
2005, pp. 17-22.
-
Multanen, P.
Nosto- ja siirtotekniikka -tulevaisuuden tutkimusalueita. Kunnossapitolehti.
2005, 2, s. 26-27.
-
Rinkinen, J., Rusanen, H. & Koivula, T.
Hydraulijärjestelmien vikaantumisen päätekijöitä. Teollisuushydrauliikan vianetsintä seminaari 6.-7.4.2005 Tampere, Finland.
2005, 7 p.
-
Rinkinen, J., Rusanen, H. & Koivula, T.
Hydraulijärjestelmien vikaantumisen päätekijöitä. Kunnossapitolehti.
2005, 4, s. 28-32.
-
Rusanen, H., Koivula, T. & Rinkinen, J.
Vika-, vaikutus- ja kriittisyysanalyysin laatiminen sekä sen hyödyntäminen. Teollisuushydrauliikan vianetsintä seminaari 6.-7.4.2005 Tampere, Finland.
2005, 7 s.
-
Vilenius, M.
Etäoperoinnin ja virtuaalitekniidoiden ROViR-keskus Tampereelle. TTY&Co.
2005, 1-2, s. 22-23.
Kotim. vertaisarvioimattomat artikkelit
2004
Kotim. vertaisarvioimattomat artikkelit
2003
-
Elo, L. & Nykänen, J.
Tuloksia ja yllätyksiä hydrauliikan kunnonvalvontamittauksista. Fluid Finland-lehti.
2, 2003, 2, Visido Ky. s. 9-13.
-
Hakonen, E., Iljana, P., Kotineva, T., Rinkinen, J. & Vainio, K.
Kannattaako hydrauliikan kunnonvalvonta. Fluid Finland-lehti.
2003, 1, s. 12-18.
-
Koskinen, K. T.
Korkeakoulujen näkemyksiä, Hyödyt saavutetaan parhaiten tekemällä avointa yhteistyötä. TechVilla News, Nosto- ja siirtoalan osaamiskeskuksen tiedotuslehti - 2003.
2003, s. 9.
-
Lahtinen, J., Hakonen, E., Holmberg, G., Kantola, E., Rinkinen, J. & Viskari, M.
Palvelevatko hydrauliikan piirrosmerkit ja kaaviot kaikkia käyttäjätahoja?. FLUID Finland.
2, 2003, 4, s. 24-35.
-
Mäkinen, J. & Rinkinen, J.
Valmistuksesta aiheutuvat epäpuhtaudet hydrauliikassa. Fluid Finland-lehti.
2, 2003, 2, Visido Ky. s. 14-15.
-
Multanen, P.
Hydraulisuodattimen suorituskyky vaihtelevissa virtausolosuhteissa. FLUID Finland -lehti.
2, 2003, 3, Visido Ky. s. 26-29.
-
Multanen, P., Rinkinen, J.
Öljyn puhtauden mittaus. Hydrauliikan mittaukset 26.-27.11.2003 AEL Insko-seminaari.
2003, 11 s.
-
Myllykylä, J.
Mittaustulosten tulkinta ja dokumentointi. Hydrauliikan mittaukset 26.-27.11.2003, AEL, Helsinki.
2003, 15 s.
-
Rinkinen, J., Viinonen, R., Elo, L. & Mäkinen, J.
Tavoitteena moderni hydrauliyksikkö. FLUID Finland.
2, 2003, 4, s. 36-38.
-
Siuko, M.
Tampereen teknillisessä yliopistossa suunnitellaan fuusioreaktorin huoltolaitteita. Prizz. Uutiset, Satakunnan osaamiskeskuksen ja PrizzTech Oy:n tiedotuslehti.
2003, 4, s. 8.
-
Tikkanen, S.
Virtuaalinen kampiakseli yksinkertaistaa moottorin. Kunnossapito.
2003, 6, KP-Media Oy. s. 49-51.
-
Vilenius, M.
Itsenäisesti toimivat koneet innostivat hydrauliikkakonferenssissa. Tampere-talon sanomia -lehti.
2003, 2, s. 4.
-
Virvalo, T. & Mäkinen, E.
Hydrauliikka ja pneumatiikka asemaservon toteutuksessa, osa III, Vesihydraulisen asemaservon suunnittelu. FLUID Finland.
2, 2003, 2, s. 24-31.
-
Virvalo, T., Mäkinen, E.
Hydrauliikka ja pneumatiikka asemaservon toteutuksessa, osa IV Pneumaattisen asemaservon suunnittelu. FLUID Finland.
2, 2003, 3, 12-18.
-
Virvalo, T. & Mäkinen, E.
Pneumatiikalla pitkä historia. FLUID Finland.
2, 2003, 3, s. 8-10.
Kotim. kirjat ja raportit
2010
-
Airila, Mauri; Ekman, Kalevi; Hautala, Pekka; Kivioja, Seppo; Kleimola, Matti; Martikka, Heikki; Miettinen, Juha; Niemi, Erkki; Ranta, Aarno; Rinkinen, Jari; Salonen, Pekka; Verho, Arto; Vilenius, Matti; Välimaa, Veikko.
Koneenosien suunnittelu.
4-5 p, 2010, 796.
Kotim. kirjat ja raportit
2008
Kotim. kirjat ja raportit
2007
Kotim. kirjat ja raportit
2006
-
Fonselius, J., Rinkinen, J. & Vilenius, M.
Hydrauliikka II.
3. p., 2006, Tampere. Tampereen Yliopistopaino Oy - Juvenes Print. 226 s.
-
Fonselius, J., Rinkinen, J. & Vilenius, M.
Koneautomaatio: Servotekniikka.
2. p., 2006, Tampere. Tampereen Yliopistopaino Oy - Juvenes Print. 194 s.
-
Kauranne, H., Kajaste, J. & Vilenius, M.
Hydrauliikan perusteet.
3.-6. p., 2006, Helsinki. WSOY. 354 s.
-
Rinkinen, J., Ekström, K., Hakonen, E., Holmberg, G., Iljana, P., Kallela, J., Lahtinen, J., Nurminen, T., Oinonen, A., Palin, M., Räihä, K., Sipola, A., Suontama, K., Vainio, K., Vuolle, P.I., Niemelä, M. & Viertevä, J.
Teollisuushydraulijärjestelmän suunnittelu ja hankinta, Design and procurement of industrial fluid power systems. PSK-Käsikirja.
1, 2006, Helsinki. PSK Standardisointiyhdistys ry. 98 s.
Kotim. kirjat ja raportit
2005
-
Määttä, T., Multanen, P., Handroos, H., Eskola, T., Sääski, J., Salonen, T., Makkonen, P. & Mäkiranta, A.
Digitaalisen koneenrakennuksen nykytila ja kehitystarpeita Suomessa - esiselvitys. VTT tutkimusraportti.
2005, 64 s.
Kotim. kirjat ja raportit
2003
-
Antila, K., Kajander, K., Korpi, A., Lehtovaara, A., Luukkainen, T., Malinen, R., Malkamäki, H., Miettinen, J., Mikkola, K., Pietiläinen, L., Pulkkinen, P., Rinkinen, J., Ronkainen, H., Räty, K., Strengell, K., Suontama, K., Säynätjoki, M., Vihersalo, J., Virtanen, I. & Vuolle, P.
Teollisuusvoitelu, Kunnossapidon julkaisusarja.
8, 2003, 246 s.
-
Kauranne, H., Kajaste, J. & Vilenius, M.
Hydrauliikan perusteet.
4 p., 2003, Vantaa 2004. WSOY. 354 s.
Kotim. ICT materiaali
2010
-
Mäkelä, Teemu; Nurmi, Juha; Punki, Janne; Ranta, Pekka; Tebest, Teemo; Leino, Timo; Palonen, Tuija; Helminen, Matti; Markkula, Mikko; Koskinen, Kari T.
Virtuaalinen konelaboratorio työkonejärjestelmien opetukseen. Lihaako -projekti. Smart Simulators -tutkimusryhmä.
2010,
Kotim. ICT materiaali
2009
-
Kortemaa, A., Mäkelä, T., Punki, J., Ranta P., Palonen, T., Leino, T., & Koskinen, K.T.
Metviro.
2009,
Lisensiaatin tutkielmat
2004
Diplomityöt
2011
-
Walkeajärvi, Juho.
3D-mallin hyödyntäminen laivan hydraulikäyttöisen lastiluukun virtuaalisessa suunnittelussa,
2011.
-
Rautamies, Antti.
Aumansekoittajan voimansiirto,
2011.
-
Laine, Sami.
Developing new design concepts for passenger ships' safe return to port -systems,
2011.
-
Ketonen, Miikka.
Digitaalihydraulisen paineenrajoitustoiminnon suunnittelu ja toteutus,
2011.
-
Paredes Garibay, Jorge.
Evaluation of stereovision disparity maps for driver assistance system,
2011.
-
Nurmi, Jarmo.
Fault detection and isolation for mobile hydraulic systems,
2011.
-
Juhász, György.
Fault identification at hydraulic, position conrolled system with the use of Extended Kalman Filter,
2011.
-
Kuosku, Mika.
Hydrauliikan komponenttipuhtauslaboratorion varustelu ja koemittaukset,
2011.
-
Vesa, Jukka.
Hydraulijärjestelmien lainsäädäntö ja dokumentointivaatimukset,
2011.
-
Nikkinen, Atte.
Hydraulikäyttöisen koneen tehokkuuden kehittäminen online-seurannan avulla,
2011.
-
Leppänen, Ilkka.
Hydraulinen energian varastointi dieselgeneraattorikäyttöisessä satamanosturissa,
2011.
-
Pesu, Tero.
Hydraulisen nelijalkaisen robotin voimansiirron mallinnus ja simulointi,
2011.
-
Sun, Chengyan.
Hydrostatic-mechanical power split CVT,
2011.
-
Soleimani Abyaneh, Amir.
Identification and control of electro servo test bench,
2011.
-
Heiskanen, Ville-Matti.
Kiertovoitelusuodattimien tehokkuuden tutkiminen,
2011.
-
Puolatie, Eero.
Lavansiirtotrukin sähköisen ohjaustehostimen kehittäminen,
2011.
-
Nuutinen, Pekka.
Lisätyn todellisuuden hyödyntäminen suunnittelukatselmoinnissa,
2011.
-
Enlund, Janne.
Mallipohjainen säätö hydraulisessa sylinterikäytössä,
2011.
-
Orona, Luis Miguel.
Optimization and redesign of a spherical wrist for a water hydraulic manipulator,
2011.
-
Orona Dominguez, Luis Miguel.
Optimization and redesign of a spherical wrist for a water hydraulic manipulator,
2011.
-
Tuppurainen, Antti.
Pneumaattisen digitaaliventtiilijärjestelmän mallinnusmenetelmien vertailu,
2011.
-
Fatih, Kart.
Pump steering mechanism for articulated frame steering mobile machines,
2011.
-
Vainio, Kimmo.
Sylinterituotannon tehostaminen ja voimasylinterin toiminta,
2011.
-
Marchand, Francois.
Tooling concepts for WHMAN remote handling,
2011.
-
Yli-Kätkä, Pasi.
Traktorin hydrauliventtiilistön soveltuvuus nosturin koordinaattiohjaukseen,
2011.
-
Virtanen, Valtteri.
Traktorin nelivedon ominaisuuksien kehittäminen ja mittaaminen,
2011.
-
Ratus, Teemu.
Ympäristöolosuhteiden vaikutus hydraulijärjestelmien suunnitteluun ja käyttöön merisovelluksissa,
2011.
-
Pykäri, Patrik.
Öljyn kunnonvalvonnan toteutus tunnelityökoneissa,
2011.
Diplomityöt
2010
-
Auvinen, Janne.
3D-simulointiohjelmiston ja automaattivaraston ohjausjärjestelmän yhdistäminen,
2010.
-
Kivi, Tuure.
Ajoneuvoalustaisen henkilönostimen hydraulijärjestelmän energiataloudellisuuden parantaminen,
2010.
-
Laakso, Janne.
Ajosimulaattoreiden liikealustan toteuttamisvaihtoehtojen tarkastelu,
2010.
-
Teinilä, Arto.
Aktiivinen hydraulinen levyjarru,
2010.
-
Vallas, Arvi.
Analysointitoimintojen automatisointi liikkuvien työkoneiden ohjausjärjestelmien testauksessa,
2010.
-
Cabrera, Rigoberto.
Application of an industrial robot in master-slave teleoperation with haptic interface,
2010.
-
Nurminen, Teemu.
Augmented reality software module for a visualization system,
2010.
-
Kekki, Juha.
Automaattisen puhalluskalvolinjan käyttöönotto,
2010.
-
Viitanen, Mikko-Matti.
Automaattiset kuljetinjärjestelmät elintarviketeollisuudessa,
2010.
-
Niinikorpi, Petri.
Automatkustajalauttojen vesijärjestelmien virtausteknisten laskelmien yhtenäistäminen ja järjestelmien modulointi,
2010.
-
Kemppinen, Juha.
Autonomy improvement and energy management of a remotely operated inspection and measurement vehicle for use in Cernʻs LHC tunnel,
2010.
-
Sainio, Aki Taneli.
Calibration and control design for a 3-DOF teleoperated water hydraulic arm,
2010.
-
Laine, Mikko.
Design guide for fuel and lubricating oil pressure regulating valves,
2010.
-
Kodisoja, Tapio.
Development of a mobile robot for remote inspection,
2010.
-
Henttonen, Jussi.
Development of piezo injector technology for industrial mixing processes,
2010.
-
Lähteenmäki, Teemu.
Digitaalihydraulinen 3-tiepaineenalennusventtiili,
2010.
-
Grönlund, Ossi.
Harmonization of hydraulic filtration for mobile mining and construction machinery,
2010.
-
Tuominen, Juha.
Hydraulic boom monitoring with IEEE 802.11 based wireless sensor network,
2010.
-
Virta, Sampsa.
Hydrauliikan putkistopassin koulutusmateriaalin kehittäminen,
2010.
-
Pohjavirta, Juho.
Hydrauliikan sovellukset biomekatronisissa laitteissa,
2010.
-
Paturi, Jussi.
Hydraulikaavioiden käyttö modulaarisessa tuoterakenteessa ja hydraulikaavioiden tuottamisen standardointi,
2010.
-
Munck-Lagus, Kalle.
Hydraulikomponenttien simulointimallien laskennallisen tehokkuuden parantaminen virtuaaliympäristössä,
2010.
-
Selin, Jarkko.
Hydraulilohkojen puhdistamisen kehittäminen piensarjatuotannossa,
2010.
-
Backas, Joni.
Hydraulipumpun hyötysuhteiden mallintaminen neurolaskennan avulla,
2010.
-
Katajisto, Markus.
Hydraulipumpun sähköinen ohjaus kallionporauslaitteessa,
2010.
-
Julkunen, Timo.
Hydraulisen luistonestojärjestelmän testilaitteiston suunnittelu,
2010.
-
Kurkela, Aimo.
Hydraulisen ohjausventtiilistön kehitys ja testaus,
2010.
-
Hokkanen, Osku.
Hydrauliventtiilistöjen tietokoneohjatun testiohjelman luominen,
2010.
-
Heikkinen, Pertti.
Hydromuovauskoneen hydrauliikan kunnossapidon sunnittelu,
2010.
-
Kinnanen, Ville.
Hydropneumaattisesti jousitetun hoitoalustan suunnittelu,
2010.
-
Puntti, Mika.
Kalliorakennuskoneiden hydraulijärjestelmien viat ja vikapuuanalyysi,
2010.
-
Mantere, Petri.
Komentosarjakieli liikkuvien työkoneiden ohjausjärjestelmien automaattiseen testaukseen,
2010.
-
Rantanen, Lars.
Laatujohtaminen ja laadunhallintajärjestelmän kehittäminen kasvavassa ohjelmistoyrityksessä,
2010.
-
Kiviaho, Erkka.
Langattomat sovellukset laiva-automaatiossa, kehittäminen ja käytettävyys,
2010.
-
Hilden, Hans.
Lastauskoneen lopputestauksen kehittäminen,
2010.
-
Kivioja, Niko-Matti.
LED -teknologiaan perustuvan Lednet - kasvinvalotusjärjestelmän tehonsyötön ja ohjauksen suunnittelu,
2010.
-
Keränen, Ilkka.
Leikkausparametrien vaikutus läpäisyyn ja leikkausjälkeen pehmeiden aineiden vesisuihkuleikkauksessa,
2010.
-
Vertanen, Kari.
Lentokoneen hydraulimaalaitteen huollon kehitys ja toiminnan parantaminen,
2010.
-
Ulvila, Vesa.
Liikkuvan työkoneen ajonaikainen tiedonkeruujärjestelmä,
2010.
-
Ahopelto, Miika.
Liikkuvan työkoneen ohjausjärjestelmän suunnittelu,
2010.
-
Myllymäki, Mikko.
Liikkuvan työkoneen pyörän maastoon sopeutuva tuenta,
2010.
-
Kankaanmäki, Jussi.
Mobilerumpuhakkurin hydraulijärjestelmän analysointi,
2010.
-
Heinonen, Niko.
Modeling of incinerator control,
2010.
-
Petäjäjärvi, Suvi.
Modulaarisen hydraulijärjestelmän kehittäminen laivojen sylinterikäyttöisille lastiluukuille,
2010.
-
Moilanen, Teppo.
Neljän vapausasteen puomin säätöjärjestelmä,
2010.
-
Ziaei, Zahra.
Online markerless augmented reality for remote handling system in bad viewing conditions,
2010.
-
Mankki, Matti.
Patruunaventtiilin simulointimallin kehittäminen,
2010.
-
Luoma-Nirva, Max.
Prosessianturit leikkuunesteiden online-kunnonvalvonnassa,
2010.
-
Koski, Antti.
Puutavaranosturin proportionaaliohjauksen kehittäminen,
2010.
-
Kinnunen, Pasi.
Requirements management in concept design phase,
2010.
-
Helmi, Meri.
Six Sigma- menetelmien ja koesuunnittelun soveltaminen teollisuusyrityksen prosesseihin,
2010.
-
Sillanpää, Jouko.
Sähköisen ajovoimansiirron soveltaminen pienkuormaajassa,
2010.
-
Leinonen, Henri.
Työkoneen hydrostaattisen ajovoimansiirron luistonestojärjestelmät,
2010.
-
Kolu, Antti.
Työkoneiden ohjausjärjestelmien automaattisen testauksen konseptin ja hallinnoinnin kehitys,
2010.
-
Jaakkola, Tuomas.
Venttiilistöratkaisujen vertailu rikotuspuomikäytössä,
2010.
-
Pietikäinen, Jarno.
Vesihydraulisen proportionaaliventtiilin asemasäätimen käyttö kunnonvalvonnassa,
2010.
Diplomityöt
2009
-
Tiitinen, Juha.
Applying UML in a LabVIEW based control system,
2009.
-
Montagne, Loic.
Conceptual study of the storage and maintenance room for the divertor remote handling in ITER,
2009.
-
Valkama, Peetu.
Design of a six degree of freedom water hydraulic arm for remote handling,
2009.
-
Peltola, Antti.
Digitaalihydraulisen venttiilijärjestelmän mitoitus ja testaus,
2009.
-
Heikkilä, Mikko.
Digitaalisen hydraulipumpun venttiilivikojen havaitseminen ja kompensointi,
2009.
-
Kallioinen, Tero.
Elektroniikan liitosprosessin suorituskyvyn kasvattaminen,
2009.
-
Järvenperä, Henri.
Engineering method development in delivery projects,
2009.
-
Hallinen, Päivi.
Ennusterakenteen mallintaminen raskaassa koneteollisuudessa,
2009.
-
Kivelä, Tuomo.
Fuusiovoimalan huoltorobotin kinemaattinen kalibrointi,
2009.
-
Hänninen, Juha-Matti.
Hydraulisen puomin nostotoiminnon värähtelyn ja toiminnan tutkiminen,
2009.
-
Leskinen, Martti.
Hydraulisten iskulaitteiden testijärjestelmän suunnittelu,
2009.
-
Markkula, Mikko.
Hydraulisten ja mekaanisten järjestelmien simulointimallien automaattinen generointi,
2009.
-
Allica, Carlos.
Implementation of a Product Lifecycle Management system for fusion project,
2009.
-
Väyrynen, Jukka.
Improving the safety and reliability of a water hydraulic manipulator,
2009.
-
Alatulkkila, Kimmo.
Jäteastioiden automaattisen pesulaitteiston suunnittelu,
2009.
-
Kangas, Janne.
Kenkäpuristintelan kuormitusmuutoksen simulointi,
2009.
-
Kujansivu, Jyrki.
Konerakentajan koneturvallisuus ja turvalliset ohjausjärjestelmät,
2009.
-
Rusi, Mika.
Kuorma-autojen hydraulijärjestelmien suunnittelu,
2009.
-
Vanhala, Matias.
Kuormantuntevan painekompensoidun suuntaventtiilin ominaisuuksien tutkiminen,
2009.
-
Ryyppö, Juho.
Leikkupuimurin nelivedon kehittäminen,
2009.
-
Rintaniemi, Antti.
Levytyökeskuksien hydraulijärjestelmien puhtaustason parantaminen,
2009.
-
Karhu, Antero.
Liikkuvan työkoneen suunnittelu tuotekehityksen ja globaalin hankinnan yhteistyönä,
2009.
-
Hallenberg, Markus.
Maanrakennuskoneen lisälaitteen tuotekehitys,
2009.
-
Lehtola, Juha.
Obstacle detection for autonomous underground machinery,
2009.
-
Virta, Pekka.
Online particle counting and fluid quality monitoring in aircraft hydraulic systems,
2009.
-
Puhakka, Juuso.
Paineisku-imuventtiilin suunnittelu ja testaus,
2009.
-
Hokkanen, Ilkka.
Porauslaitteen puomien tarkkuusmittausten automatisointi,
2009.
-
Amjad, Faraz.
Requirements management system : implementation on ITER End-Effectors design,
2009.
-
Martinez Carrion, Laureano.
Simulation and control of proportional valve controlled water hydraulic motion platform,
2009.
-
Hahto, Antti.
A task planning tool for fusion reactor remote handling,
2009.
-
Suhonen, Mikko.
Tela-alustaisen murskauslaitoksen polttoainetalous,
2009.
-
Kivelä, Timo.
Verification of anticollision functionalities in automatic stacking crane,
2009.
-
Perukangas, Marko.
Vesihydraulisen mobilekoneen ohjaus- ja kunnonvalvontajärjestelmän suunnittelu ja toteutus,
2009.
-
Malinen, Jarkko.
Vesihydraulisen paineenrajoitus- ja vapaakiertoventtiilin kehittäminen,
2009.
-
Pihlainen, Janne.
Vesisuihkuleikkauslaitteen suunnittelu ja toteutus,
2009.
Diplomityöt
2008
-
Mäenpää, Mikko.
Analysis of a common rail injector functional performance and dimensional sensitivity,
2008.
-
Moilanen, Eveliina.
Development of hydraulics for boom control,
2008.
-
Pulakka, Juho.
Development of safety critical software for international thermonuclear experimental reactor-project,
2008.
-
Seppälä, Juho.
Digitaalihydrauliikan soveltaminen fuusioreaktorin huoltorobotin testausjärjestelmässä,
2008.
-
Nyström, Mikko.
Digitaalihydrauliikan soveltamismahdollisuudet vaihtolavalaitteessa,
2008.
-
Huova, Mikko.
Digitaalihydrauliikan säätimien sopimuspohjainen ohjelmointi,
2008.
-
Ahola, Ville.
Digitaalihydrauliikka syklisen toimilaitteen ominaisuuksien kehittämisessä,
2008.
-
Jokelainen, Juho.
Hydraulic balancing of boom,
2008.
-
Suominen, Risto.
Hydrauliikan puhtauden analysointi kaivoskuormaajissa,
2008.
-
Salminen, Teemu.
Hydrauliikkatestiaseman käyttöönotto ja kehittäminen sarjatuotteille,
2008.
-
Poutiainen, Janne.
Hydraulimuuntimen suunnittelu ja toteutus,
2008.
-
Nieminen, Tomi.
Hydraulisten iskulaitteiden koekäyttöjärjestelmä,
2008.
-
Alarotu, Vänni.
Kolmen vapausasteen pneumaattisen liikealustan suunnittelu ja toteutus,
2008.
-
Ylä-Outinen, Marko.
Laajan lämpötila-alueen hydrauliöljyn valinta HST-järjestelmään,
2008.
-
Bäcklund, Juho.
Logistiikkapalveluyrityksen materiaalinohjauksen kehittäminen,
2008.
-
Pollari, Tuomo.
Mapping development possibilities of hydrostatic mechanical transmission system,
2008.
-
Hietala, Jukka-Pekka.
Modelling and simulation of an aircraft rudder servoactuator,
2008.
-
Herlevi, Olli.
Offshore-vessel power and propulsion system standardization through concepts,
2008.
-
Aarnio, Antti.
Paineen mittaus älykkään hydrauliletkun kunnonvalvontaan,
2008.
-
Laitinen, Simo.
Position control of dynamic mass using electro-hydraulic servo system,
2008.
-
Roppo, Pekka.
Pressure pulsation in external gear pumps,
2008.
-
Jokisuu, Johannes.
Raskaan ajoneuvon voimansiirron ja ajofysiikan mallintaminen koulutussimulaattorisovellukseen,
2008.
-
Järä, Juha.
Runko-ohjatun autonomisen työkoneen keskinivelen säädön suunnittelu,
2008.
-
Oinonen, Turo.
Sähköisen ohjausjärjestelmän käyttö hydrostaattisessa ajovoimansiirrossa,
2008.
-
Saarinen, Matti-Ilmari.
Telahionnan numeerisen mallin parametrointi,
2008.
-
Hurme, Antti.
Tienhoitoauton työhydrauliikan hajautetun ohjausjärjestelmän kehitys,
2008.
-
Järvinen, Jouko.
Traktorin voimansiirron ohjaimen simulointipohjaisen kehitysympäristön käyttöönotto,
2008.
-
Anttonen, Mikko.
Tuotekehityssimulaattorin rakentaminen tunnelijumbon ohjausjärjestelmän testaamiseen sekä puomin dynamiikan tarkasteluun,
2008.
-
Peltola, Juha.
Työkoneen puomiston hydrauliikan mitoitus,
2008.
-
Kulmala, Mikko.
Värähtelyn vaimennus henkilönostimissa,
2008.
-
Takalo, Ville.
Water hydraulic jack design,
2008.
Diplomityöt
2007
-
Vuohijoki, Antti.
Autonomisen työkoneen simulointi ja kehitysympäristön luominen,
2007.
-
Honkakorpi, Janne.
CAN-väyläpohjainen sulautettu kulma-anturi,
2007.
-
Kekäläinen, Teemu.
Cassette Toroidal Moverin vesihydraulisen manipulaattorin konseptisuunnittelu,
2007.
-
Immonen, Aarno.
Hydraulikomponenttien käyttöiän tarkastelu,
2007.
-
Mikkola, Jaakko.
Hydraulisen kaksipainejärjestelmän paineenvaihtoventtiilien vertailu,
2007.
-
Puura, Jussi.
Hydraulisen puomin nivelsäätäjien automaattinen virittäminen,
2007.
-
Nieminen, Antti.
ITER - huoltorobotin paikoitustarkkuuden verifiointi testipenkissä,
2007.
-
Jaurola, Miikka.
Korkeapainepumpun tuoton säätötavan vaikutus ruiskutusjärjestelmän hyötysuhteeseen,
2007.
-
Petlin, Hannu.
Kääntölaitteen hydraulikoneikon suunnittelu,
2007.
-
Ylinen, Marko.
Metsäkoneen nostopuomin aktiivinen värähtelyn vaimennus,
2007.
-
Saarinen, Mika.
Mobilekoneen työhydrauliikan vesihydraulinen toteutus ja pumpun säätö,
2007.
-
Viitala, Jaakko.
Painekompensoidun virransäätöventtiilin ominaisuuksien kehittäminen ja testaus,
2007.
-
Lehtinen, Timo.
Paloavustavien ja biohajoavien hydraulinesteiden soveltuvuus sekä niiden kokonaiskustannukset risteilylaivojen hydraulijärjestelmissä,
2007.
-
Kumpulainen, Jarkko.
Prosessin säädön kehittäminen ohjelmoitavalla logiikalla,
2007.
-
Rantanen, Jukka-Pekka.
Putkistosuunnittelun 3D-mallinnuksen ja globaalien toimintatapojen kehittäminen,
2007.
-
Aallonranta, Sauli.
Sylinterien samanaikainen toiminta eräässä hydraulisovelluksessa,
2007.
-
Karttunen, Matti.
Testauslaitteisto suihkumoottorin voiteluöljypumpulle,
2007.
Diplomityöt
2006
-
Alamäki, Hannu.
Acceptance of audiovisual quality with erroneous streams in mobile TV,
2006.
-
Viitaniemi, Jarno.
Automaattisen lastauskoneen ohjaushydrauliikan tutkimus- ja kehitystyö,
2006.
-
Aaltonen, Kari.
Dieselmoottorin dynaaminen testaus,
2006.
-
Huvila, Timo.
Hidaskäyntisen hydraulimoottorin käynninaikainen kunnonvalvonta,
2006.
-
Hakanperä, Ville.
Hydraulisen äänilähteen jatkokehitys,
2006.
-
Hyttinen, Ari.
Kameravalvontajärjestelmän etäkäyttö,
2006.
-
Sipilä, Matti.
Luistonestojärjestelmä eräässä hydrostaattisessa ajovoimansiirrossa,
2006.
-
Kojo, Markku.
Monitelakalanteri päällystävässä paperinvalmistuslinjassa,
2006.
-
Kunelius, Janne.
Pienkuormaajan kauhan vakaajan säätäjän suunnittelu simuloinnin avulla,
2006.
-
Kivihaka, Markus.
Raskaan maastoajoneuvon monipyöräohjaus,
2006.
-
Kiili, Ilari.
Vesihydraulisen tilavuusvirranmuuntimen suunnittelu ja toteutus,
2006.
Diplomityöt
2005
-
Lallukka, Janne.
Hydraulisylinterin iskuliikkeen tutkiminen nopeuden muuttuessa,
2005.
-
Sihto, Jarkko.
Hydrostaattinen voimansiirto seosrehuvaunussa,
2005.
-
Laihanen, Lauri.
Kulumisen vaikutukset hydraulisuuntaventtiilin ominaisuuksiin,
2005.
-
Suojansalo, Jani.
Magnetostriktiivisen äänilähteen testaus,
2005.
-
Korpijaakko, Tapio.
Paalutuskoneen hydraulijärjestelmän vikapuuanalyysi,
2005.
-
Verho, Samuli.
Patruunatekniikan soveltaminen vesihydrauliikkaan,
2005.
-
Saarela, Markus.
Puutavaranosturin koordinoitu ohjaus,
2005.
-
Toivo, Mikko.
Sähköhydraulisen kaasunvaihtoventtiilistön käyttöönotto ja mittaukset,
2005.
Diplomityöt
2003
-
Järvi, Tomi.
Hydraulimoottorin mittaus ja analysointi vianetsinnän kannalta,
2003.
-
Tolppa, Juha.
Kalibrointi- ja mittausepävarmuuksien vaikutus pienhiukkasmittalaitteen tulokseen,
2003.
-
Myllymäki, Jukka.
Liikkuvan työkoneen hydraulijärjestelmän tarkastelu,
2003.
-
Vuorio, Petteri.
Maanalaisen tutkimustilan automaattiset henkilösuojausjärjestelmät,
2003.
-
Hannula, Antti.
Sahalinjan sähköisten ja hydraulisten servojen vertailu,
2003.