2011
Saksala T, Hokka M, Kuokkala V-T, Mäkinen J (2011) “Numerical Simula-tion of Dynamic Brazilian Disc Test on Rock”, Proceedings of the 24th Nor-dic Seminar on Computational Mechanics, J. Freund and R. Kouhia (Eds.), 3-4 Nov 2011, Helsinki, Finland.
Saksala T., (2011) “Numerical modelling of bit-rock fracture mechanisms in percussive drilling with a continuum approach”, International Journal for Numerical and Analytical Methods in Geomechanics. Vol 35, Issue 13, pp. 1483–1505.
Mäkinen J, Kouhia R, Fedoroff A, Marjamäki H (2011) “Direct Computation of Critical Equilibrium States for Spatial Beams and Frames”, International Journal for Numerical Methods in Engineering. DOI:10.1002/nme.3233
Mäkinen J, Cardona A, Kouhia R, Marjamäki H (2011) “Dynamic Collapse Simulation of Flexible Multibody Systems with Plasticity Effects” The 3rd International Conference on Computational Methods in Structural Dynamics and Earthquake Engineering (COMPDYN 2011), 26-28 May 2011, Corfu, Greece.
Marjamäki H, Mäkinen J, Ylinen A (2011) “Buckling Modelling of Hydraulic Cylinder under Dynamic Load“,The 3rd International Conference on Computational Methods in Structural Dynamics and Earthquake Engineering (COMPDYN 2011), 26-28 May 2011, Corfu, Greece.
Saksala T, Mäkinen J (2011) “Impact Modeling by Manifold Approach in Explicit Transient Dynamics” The 3rd International Conference on Computational Methods in Structural Dynamics and Earthquake Engineering (COMPDYN 2011), 26-28 May 2011, Corfu, Greece.
Ylinen A, Mäkinen J, Marjamäki H (2011) “Non-Linear Finite Element Mod-elling of a Maintenance Robot”, The Twelfth Scandinavian International Conference on Fluid Power (SICFP'11) 18-20 May 2011, Tampere, Finland.
Mäkinen J, (2011) “Simulations of Flexible Multibody Systems with Plasticity Effects” Proceedings of the 24th Nordic Seminar on Computational Me-chanics, J. Freund and R. Kouhia (Eds.), 3-4 Nov 2011, Helsinki, Finland.
2010
Saksala T., (2010) “Damage-viscoplastic consistency model with a parabolic cap for rocks with brittle and ductile behaviour under low-velocity impact loading”, International Journal for Numerical and Analytical Methods in Geomechanics. Vol 34, Issue 13, pp. 1362–1386.
Saksala T., Mäkinen J.M., (2010), ”Numerical Modelling of Bit-Rock Interaction in Percussive Drilling by Manifold Approach”, In: A. Eriksson and G. Tibert (Eds.): Proceedings of the 23rd Nordic Seminar on Computational Mechanics, Stockholm 21-22 October 2010, Sweden.
Saksala T., (2010), ”Numerical Modelling of Bit-Rock Interaction in Percussive Drilling”, In: (CDROM) Proceedings of IV European Congress on Computational Mechanics (ECCM IV): Solids, Structures and Coupled Problems in Engineering, Paris 16-21 May, France, paper 2078.
Mäkinen J, Kouhia R, Ylinen A (2010) “On Computing Critical Equilibrium Points by a Direct Method”, The 23rd Nordic Seminar on Computational Mechanics (NSCM-23), 21-22 October 2010, Stockholm, Sweden.
Saksala, T. 2010. Damage-viscoplastic consistency model for rock fracture in heterogeneous rocks under dynamic loading. International Journal for Numerical and Analytical Methods in Geomechanics, 34(10), pp. 1041-1062.
Marjamäki, H., & Mäkinen, J., Pertola, P. 2010. Non-Linear Finite Element Modelling of a Test System for Maintenance Robot. The Tenth International Conference on Computational Structures Technology (CST2010), 14-17 September 2010, Valencia Spain.
Mäkinen, J., Kouhia, R., Fedoroff, A. & Marjamäki, H. 2010. Implementation of a Direct Procedure for Critical Point Computations. The Tenth International Conference on Computational Structures Technology (CST2010), 14-17 September 2010, Valencia Spain.
Mäkinen, J., Matikainen, M. 2010. Geometrically Exact Beam Formulation versus Absolute Nodal Coordinate Formulation. The 1st Joint International Conference on Multibody System Dynamics (IMSD2010), 25-27.5.2010, Lappeenranta, Finland
Mäkinen, J., Pertola, P. & Marjamäki, H. 2010. Modeling Coupled Hydraulic-Driven Multibody Systems using Finite Element Method. The 1st Joint International Conference on Multibody System Dynamics (IMSD2010), 25-27.5.2010, Lappeenranta, Finland
2009
Marjamäki, H. & Mäkinen, J. 2009. Total Lagrangian beam element with C1-continuous slide-spring. Computers and Structures 87 9-10, pp. 534-542.
Saksala, T. 2009. Geometric return algorithm for non-associated plasticity with multiple yield planes extended to linear softening/hardening models. Rakenteiden Mekaniikka 42 2, pp. 83-98.
Mönicke, A., Katajisto, H., Kere, P., Palanterä, M. & Perillo, M. 2008. Engineering oriented formulation for laminate lay-up optimization. Rakenteiden Mekaniikka 41 3, pp. 137-151.
Mäkinen, J. 2009. Manifolds on continuum mechanics. In: Koppel, A. & Oja,J. Continuum Mechanics Nova Science Publishers. 52 p.
Mäkinen, J. 2009. Rotation manifold SO(3) and its tangential vectors. In: Canterra, A.B. (ed.). Lie Groups: New Research Nova Science Publisher. pp. 61-88.
Fedoroff, A., Kouhia, R., Marjamäki, H. & Mäkinen, J. 2009. On the direct computation of critical equilibrium states in solid and structural mechanics. In: Mäkinen, R. et al. (toim.). Proceedings at the 10th Finnish Mechanics Days, X Suomen Mekaniikkapäivät, Jyväskylä, 3.-4.12.2009 Jyväskylä. 12 p.
Kere, P. & Lyly, M. 2009. A model for determining buckling limits of imperfect cylindrical composite shells. In: Mäkinen, R. et al. (toim.). Proceedings at the 10th Finnish Mechanics Days, X Suomen Mekaniikkapäivät, Jyväskylä, 3.-4.12.2009 Jyväskylä. 12 p.
Kere, P. & Lyly, M. 2009. Reissner-Mindlin-von Karman type shell facet model for buckling simulation of imperfect cylindrical composite shells. In: Ambrosio, J. et. al. (eds). 7th EUROMECH Solid Mechanics Conference, Lisbon, Portugal, 7-11 September 2009 pp. 369-370.
Mäkinen, J., Marjamäki, H. & Pajunen, S. 2009. Nopeudesta riippuvien hitausvoimatermien vaikutus palkkilaskentaan. In: Mäkinen, R. et al. (toim.). Proceedings at the 10th Finnish Mechanics Days, X Suomen Mekaniikkapäivät, Jyväskylä, 3.-4.12.2009 Jyväskylä. 11 s.
Marjamäki, H., Mäkinen, J., Fedoroff, A. & Kouhia, R. 2009. A static method for computation of the tilting angle of working vehicles. In: Papadrakakis, M. et al. (eds.). COMPDYN 2009, ECCOMAS Thematic Conference on Computational Methods in Structural Dynamics and Earthquake Engineering, Rhodes, Greece, 22-24 June 2009 21 p.
Pajunen, S., Ojala, J. & Immonen, E. 2009. More reliable results with Fluid-Structure Interaction. In: Mäkinen, R. et al. (toim.). Proceedings at the 10th Finnish Mechanics Days, X Suomen Mekaniikkapäivät, Jyväskylä, 3.-4.12.2009 Jyväskylä. 12 p.
Mela, K. & Koski, J. 2009. Kantavien rakenteiden topologian optimoinnin formuloinnista. In: Mäkinen, R. et al. (toim.). Proceedings at the 10th Finnish Mechanics Days, X Suomen Mekaniikkapäivät, Jyväskylä, 3.-4.12.2009 Jyväskylä. 12 s.
Saksala, T. 2009. Viskoplastis-vauriomekaaninen materiaalimalli kiven rikkoutumisen mallinnukseen kallionporauksessa. In: Mäkinen, R. et al. (toim.). Proceedings at the 10th Finnish Mechanics Days, X Suomen Mekaniikkapäivät, Jyväskylä, 3.-4.12.2009 Jyväskylä. 12 s.
Marjamäki, H. 2009. Analysis of flexible mechanisms with finite element method. Tampereen teknillinen yliopisto. Julkaisu Tampere. 19, [70] s.
2008
Mönicke, A., Katajisto, H., Kere, P., Palanterä, M. & Perillo, M. 2008. Engineering oriented formulation for laminate lay-up optimization. Rakenteiden Mekaniikka 41 3, pp. 137-151.
Kere, P. & Lyly, M. 2008. On post-buckling analysis and experimental correlation of cylindrical composite shells with Reissner-Mindlin-Von Kármán type facet model. Computers & Structures 86 9, pp. 1006-1013.
Mäkinen, J. 2008. Rotation manifold SO(3) and its tangential vectors. Computational Mechanics 42 6, pp. 907-919.
Mönicke, A., Katajisto, H., Kere, P., Palanterä, M. & Perillo, M. 2008. Engineering oriented formulation for laminate lay-up optimization. Rakenteiden Mekaniikka 41 3, pp. 137-151.
Holopainen, S. 2008. Development and applications of the inverse operators in continuum mechanics. In: Schrefler, B.A. et al. (eds.). 8th World Congress of Computational Mechanics WCCM8, 5th European Congress on Computational Methods in Applied Sciences and Engineering ECCOMAS 2008, June 30 - July 5, 2008, Venice, Italy pp. 195.
Kere, P. & Jalkanen, J. 2008. Particle swarm-based multiobjective structural optimization exploiting distributed grid resources. 49th AIAA/ASME/ASCE/AHS/ACS Structures, Structural Dynamics and Materials Conference, 7-10 April 2008, Schaumburg, Illinois, USA 12 p.
Kere, P. & Lyly, M. 2008. Buckling simulation of imperfect cylindrical composite shells using Ressner-Mindlin-Von Kármán type shell facet model. XXII International Congress of Theoretical and Applied Mechanics ICTAM, 25-29 August 2008, Adelaide, Australia 2 p.
Mäkinen, J. 2008. Singulaariton geometrisesti tarkka palkkielementti. Matematiikan päivät 2008, 3-4. 1. 2008, TKK, Espoo
Mäkinen, J & Marjamäki, H. 2008. Modelling hydraulic systems as finite elements. The 17 th IASTED International Conference on Applied Simulation & Modelling, 23-25 June 2008, Corfu, Greece 6 p.
Marjamäki, H. & Mäkinen, J. 2008. A model of flexible sliding joint in beam structure. The 17 th IASTED International Conference on Applied Simulation & Modelling, 23-25 June 2008, Corfu, Greece 5 p.
Saksala, T. 2008. Damage-plastic model for numerical simulation of rock fracture in dynamic loading. In: Papadrakakis, M. et al. (eds.). Sixth International Conference on Engineering Computational Technology, Athens, Greece, 2-5 September 2008 Paper 163, 18 p.
Salmi, T. & Virtanen, S. 2008. Materiaalien mekaniikka. Tampere. Pressus Oy
2007
Mäkinen, J. 2007. Total Lagrangian Reissner's gometrically exact beam element without singularities. International journal for numerical methods in engineering 70 pp. 1009-1048.
Holopainen, S. 2007. Algorithmic consistent design sensitivity analysis of the finite deformation deviatoric inelasticity. 7th World Congress on Structural and Multidisciplinary Optimization, 21-25.5.2007. Seoul, Korea pp. 1358-1367.
Jalkanen, J. 2007. Multi-objective sizing optimization of tubular trusses. 7th World Congress on Structural and Multidisciplinary Optimization, 21-25.5.2007. Seoul, Korea pp. 941-950.
Jalkanen, J. 2007. Tubular truss optimization using heuristic algorithms. Tampereen teknillinen yliopisto, Julkaisu 706 Tampere. 106 p.
Kere, P., Huhne, C. & Lyly, M. 2007. Geometrically nonlinear analysis of imperfect cylindrical composite shells using Reissner-Mindlin-von Kármán type shell facet model. Sixth International Conference on Composite Science and Technology, 22-24.1.2007, Durban, South Africa 14 p.
Kere, P. & Jalkanen, J. 2007. Parallel particle swarm-based structural optimization in a distributed grid computing environment. AIAA Meeting, 2nd AIAA Multidisciplinary Desig Optimization Specialist Conference, 23-26 April, 2007, Honolulu, USA. 12 p.
Mäkinen, J.M.A. & Marjamäki, H.U. 2007. Orthotropic geometrically exact bar and spring elements. In: Papadrakakis, M. , Charmpis, D., Lagaros, N. & Tsompanakis, Y. (eds.). COMPDYN 2007 First International Conference on Computational Methods in Structural Dynamics and Earthquake Engineering, 13-16.6.2007. Rethymno, Grete, Greece 12 p.
Mäkipelto, J. 2007. Catmull-Clark subdivision surfaces in 3D shape optimization. 7th World Congress on Structural and Multidisciplinary Optimization, 21-25.5.2007. Seoul, Korea pp. 1594-1602.
Marjamäki, H. & Mäkinen, J. 2007. The raising movement of a hydro-mechanical lift frame. In: Papadrakakis, M. , Charmpis, D., Lagaros, N. & Tsompanakis, Y. (eds.). COMPDYN 2007 First International Conference on Computational Methods in Structural Dynamics and Earthquake Engineering, 13-16.6.2007. Rethymno, Grete, Greece 12 p.
Mela, K., Koski, J. & Silvennoinen, R. 2007. Algorithm for generating the Pareto optimal set of multiobjective nonlinear mixed-integer optimization problems. AIAA Meeting, 3rd AIAA Multidisciplinary Desig Optimization Specialist Conference, 23-26 April, 2007, Honolulu, USA. 17 p.
Saksala, T. 2007. Continuum modeling of rock fracture in dynamic indentation. In: Papadrakakis, M. , Charmpis, D., Lagaros, N. & Tsompanakis, Y. (eds.). COMPDYN 2007 First International Conference on Computational Methods in Structural Dynamics and Earthquake Engineering, 13-16.6.2007. Rethymno, Grete, Greece 12 p.