Refereed Journal Articles int'l
2012
-
Heikkilä, Pirjo; Hirvikorpi, Terhi; Hilden, Heidi; Sievänen, Jenni; Hyvärinen, Leo; Harlin, Ali; Vähä-Nissi, Mika.
High surface area nanostructured tubes prepared by dissolution of ALD-coated electrospun fibers. Journal of Materials Science.
47, 2012, 8, 3607-3612. http://dx.doi.org/10.1007/s10853-011-6207-z.
-
Nevalainen, Katja; Isomäki, Nora; Honkanen, Mari; Suihkonen, Reija; McNally, Tony; Harkin-Jones, Eileen; Syrjälä, Seppo; Vuorinen, Jyrki; Järvelä, Pentti.
Melt-coppounded nanocomposites of titanium dioxide atomic-layer-deposition-coated polyamide and polystyrene powders. Polymers for Advanced Technologies.
23, 2012, 3, 357-366. http://dx.doi.org/10.1002/pat.1879.
-
Xie, Ming; Zhang, Xiaoxue; Laakso, Jarmo; Wang, Hao; Levänen, Erkki.
New Method of Postmodifying the Particle Size and Morphology of LiFePO4 via Supercritical Carbon Dioxide. Crystal Growth & Design.
2012, 12, 2166-2168. http://dx.doi.org/10.1021/cg3003146.
Refereed Journal Articles int'l
2011
-
Aho, Johanna; Syrjälä, Seppo.
Shear viscosity measurements of polymer melts using injection molding machine with adjustable slit die. Polymer Testing.
30, 2011, 6, 595-601. http://dx.doi.org/10.1016/j.polymertesting.2011.04.014.
-
Bijl, P.; Heikkilä, A.; Syrjälä, Seppo; Aarva, A.; Poikonen, A.
Modelling of sample surface temperature in an outdoor weathering test. Polymer Testing.
30, 2011, 5, 485-492. http://dx.doi.org/10.1016/j.polymertesting.2011.03.009.
-
Curtze, Sven; Kuokkala, Veli-Tapani; Oikari, A.; Talonen, J.; Hänninen, H.
Thermodynamic modeling of the stacking fault energy of austenitic steels. Acta Materialia.
59, 2011, 3, 1068-1076. http://dx.doi.org/10.1016/j.actamat.2010.10.037.
-
Demiral, M.; Leemet, T.; Hokka, M.; Kuokkala, V.T.; Roy, A.; Silberschmidt, V.V.
Finite-element simulations of split Hopkinson test of Ti-based alloy. Advanced Materials Research.
223, 2011, 296-303. http://dx.doi.org/10.4028/www.scientific.net/AMR.223.296.
-
Eteläaho, Pirkko; Haveri, Sanna; Järvelä, Pentti.
Comparison of the Morphology and Mechanical Properties of Unmodified and Surface-Modified Nanosized Calsium Carbonate in a Polypropylene Matrix. Polymer Composites.
32, 2011, 3, 464-471. http://dx.doi.org/10.1002/pc.21065.
-
Guo, Li; Soroudi, Azadeh; Berglin, Lena; Mattila, Heikki; Skrifvars, Mikael; Torstensson, Hakan.
Fibre-based single-wire keyboard - the integration of a flexible tactile sensor into e-textiles. AUTEX Research Journal.
11, 2011, 4, 106-109. http://www.autexrj.com/cms/zalaczone_pliki/3_0018_11.pdf.
-
Hakala, Tomi; Harlin, Ali.
Crystallinity of Polyamide 6 Staple Fibers in the Felt Structure Under Simulated Paper Machine Conditions. Journal of Applied Polymer Science.
120, 2011, 4, 2222-2232. http://dx.doi.org/10.1002/app.33424.
-
Hakala, Tomi; Heikkilä, Pirjo.
Press Felts Coated with Electrospun nanofibres. Fibres & Textiles in Eastem Europe.
19, 2011, 1 (84), 89-93. http://www.fibtex.lodz.pl/article468.html.
-
Heikkilä, Pirjo; Olin, Nina; Nikkanen, Juha-Pekka.
Preparation of Electrospun TiO2 Using Nanosized TiO2 and Liquid Titanate Compound. Journal of Modern Textile Science and Engineering.
2, 2011, 1, 1-11.
-
Heino, Vuokko; Kaipiainen, Mikko; Siitonen, Pekka; Ratia, Vilma; Rissa, Kati; Lepistö, Toivo; Kuokkala, Veli-Tapani.
Compressive crushing of granite with wear-resistant materials. Tribologia, Finnish Journal of Tribology.
30, 2011, 1-2, 21-28.
-
Hoikkanen, Maija; Honkanen, Mari; Vippola, Minnamari; Lepistö, Toivo; Vuorinen, Jyrki.
Effect of silane treatment parameters on the silane layer formation and bodingto thermoplastic urethane. Progress in Organic Coatings.
72, 2011, 4, 716-723. http://dx.doi.org/10.1016/j.porgcoat.2011.08.002.
-
Honkanen, Mari; Hoikkanen, Maija; Vippola, Minnamari; Vuorinen, Jyrki, Lepistö, Toivo; Jussila, Petri; Ali-Löytty, Harri; Lampimäki, Markus; Valden, Mika.
Chararterization of silane layers on modified stainless steel surfaces and related stainless steel-plastic hybrids. Applied Surface Science.
257, 2011, 22, 9335-9346. http://dx.doi.org/10.1016/j.apsusc.2011.05.058.
-
Honkanen, Mari; Hoikkanen, Maija; Vippola, Minnamari; Vuorinen, Jyrki; Lepistö, Toivo.
Aminofunctional silane layers for improved copper-polymer interface adhesion. Journal of Materials Science.
46, 2011, 20, 6618-6626. http://dx.doi.org/10.1007/s10853-011-5611-8.
-
Honkanen, Mari; Vippola, Minnamari; Lepistö, Toivo.
Characterisation of stainless steel sufaces - modified in air at 350 C. Surface Engineering.
27, 2011, 5, 325-331. http://dx.doi.org/10.1179/174329409X397750.
-
Huttunen-Saarivirta, Elina; Antonov, M.; Veinthal, R.; Tuiremo, J.; Mäkelä, K.; Siitonen, P.
Influence of particle impact conditions and temperature on erosion-oxidation of steels at elevated temperatures. Wear.
272, 2011, 1, 159-175. http://dx.doi.org/10.1016/j.wear.2011.08.010.
-
Huttunen-Saarivirta, Elina; Kuokkala, Veli-Tapani; Kokkonen, Jari; Paajanen, H.
Corrosion effects of runway de-icing chemicals on aircraft alloys and coatings. Materials Chemistry and Physics.
2011, 126, 138-151. http://dx.doi.org/10.1016/j.matchemphys.2010.11.049.
-
Huttunen-Saarivirta, Elina; Yudin, V.E.; Myagkova, L.A.; Svetlichnyi, V.M.
Corrosion protection of galvanized steel by polyimide coatings: EIS and SEM investigations. Progress in Organic Coatings.
72, 2011, 3, 269-278. http://dx.doi.org/10.1016/j.porgcoat.2011.04.015.
-
Isakov, Matti; Kuokkala, Veli-Tapani; Ruoppa, Raimo.
Load Relaxation Behavior of Metastable Austenitic Stainless Steels at Quasi-Static Strain Rates. Steel Research International.
82, 2011, 3, 237-241. http://dx.doi.org/10.1002/srin.201000195.
-
Koivisto, Antti J.; Mäkinen, Maija; Rossi, Elina M.; Lindberg, Hanna K.; Miettinen, Mirella; Falck, Ghita C.-M.; Norppa, Hannu; Alenius, Harri; Korpi, Anne; Riikonen, Joakim; Vanhala, Esa; Vippola, Minnamari; Pasanen, Pertti; Lehto, Vesa-Pekka; Savolainen, Kai; Jokiniemi, Jorma; Hämeri, Kaarle.
Aerosol characterization and lung deposition of synthesized TiO2 nanoparticles for murine inhalation studies. Journal of Nanoparticle Research.
13, 2011, 7, 2949-2961. http://dx.doi.org/10.1007/s11051-010-0186-x.
-
Kolli, Tanja; Huuhtanen, Mika; Kanerva, Tomi; Vippola, Minnamari; Kallinen, Kauko; Kinnunen, Toni; Lepistö, Toivo; Lahtinen, Jouko; Keisti, Riitta L.
The Effect of Sulphur and Water Treatments on the Performance of Pd/b-Zeolite Diesel Oxidation Catalysts. Topics in Catalysis.
54, 2011, 1185-1189. http://dx.doi.org/10.1007/s11244-011-9740-8.
-
Kumpulainen, Tero; Pekkanen, Jussi; Valkama, Jani; Laakso, Jarmo; Tuokko, Reijo; Mäntysalo, Matti.
Low temperature nanoparticle sintering with continuous wave and pulse lasers. Optics & Laser Technology.
43, 2011, 3, 570-576. http://dx.doi.org/10.1016/j.optlastec.2010.08.002.
-
Lehtiniemi, Päivi; Dufva, Kari; Berg, Tommi; Skrifvars, Mikael; Järvelä, Pentti.
Natural fiber-based reinforcements in epoxy composites processed by filament winding. Journal of Reinforced Plastics and Composites.
30, 2011, 23, 1947-1955. http://dx.doi.org/10.1177/0731684411431019.
-
Määttä, Arto; Kanerva, Ulla; Vuoristo, Petri.
Structure and tribological characteristics of HVOF coatings sprayed from powder blends of Cr3C2-25NiCr and NiCrBSi alloy. Journal of Thermal Spray Technology.
366, 2011, 1-2, 366-371. http://dx.doi.org/10.1007/s11666-010-9579-8.
-
Metsäjoki, Jarkko; Huttunen-Saarivirta, Elina; Lepistö, Toivo.
Corrosion of Amuminized and Uncoated 9-12 % Cr Boiler Steels in Simulated Biomass and Waste Combustion Conditions. High Temperature Materials and Processes.
30, 2011, 1-2, 181-191. http://dx.doi.org/10.1515/HTMP.2011.027.
-
Metsäjoki, Jarkko; Huttunen-Saarivirta, Elina; Lepistö, Toivo.
Oxidation of Uncoated and Aluminized 9-12% Cr Boiler Steels at 550-650 C. Journal of Materials Engineering and Performance.
20, 2011, 2, 298-305. http://dx.doi.org/10.1007/s11665-010-9675-4.
-
Nättinen, Kalle; Nikkola, Juha; Minkkinen, Hannu; Heikkilä, Pirjo; Lavonen, Juha-Perttu; Tuominen, Mikko.
Reel-to-reel inline atmospheric plasma deposition of hydrophobic coatings. Journal of Coatings Technology and Research.
8, 2011, 2, 235-245. http://dx.doi.org/10.1007/s11998-010-9292-z.
-
Nättinen, Kalle; Nikkola, Juha; Minkkinen, Hannu; Heikkilä, Pirjo; Lavonen, Juho; Tuominen, Mikko.
Reel-to-reel inline atmospheric plasma depostion of hydrophobic coatings. Journal of Coatings Technology and Research.
8, 2011, 2, Springer. 237-245. http://dx.doi.org/10.1007/s11998-010-9292-z.
-
Nikkanen, Juha-Pekka; Huttunen-Saarivirta, Elina; Kanerva, Tomi; Pore, V.; Kivelä, T.; Levänen, Erkki; Mäntylä, Tapio.
Photoactive TiO2 Nanopowder Synthesized at Low Temperature without Catalyst. Journal of Ceramic Science and Technology.
2, 2011, 2, 97-102. http://dx.doi.org/10.4416/JCST2011-00008.
-
Pal, Rudrajeet; Torstensson, Håkan.
Aligning critical success factors to organizational Design - A Study of Swedish textile and clothing firms. Business Process Management Journal.
17, 2011, 3, 403-436. http://dx.doi.org/10.1108/14637151111136351.
-
Pal, Rudrajeet; Torstensson, Håkan; Mattila, Heikki.
Organisational resilience and health of business systems. International Journal of Business Continuity and Risk Management.
2, 2011, 4, 372-398. http://dx.doi.org/10.1504/IJBCRM.2011.044410.
-
Palomäki, Jaana; Välimäki, Elina; Sund, Jukka; Vippola, Minnamari; Clausen, Per Axel; Jensen, Keld Alstrup; Savolainen, Kai; Matikainen, Sampsa; Alenius; Harri.
Long, Needle-like Carbon Nanotubes and Asbestos Activate the NLRP3 Inflammasome through a Similar Mechanism. ACS Nano.
5, 2011, 9, 6881-6870. http://dx.doi.org/10.1021/nn200595c.
-
Pavlina, E.J.; Lee, S.-J.; Virtanen, Eero T.; Rothleutner, L.M.; Van Tyne, C.J.
Effects of copper on the hardenability of a medium-carbon steel. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science.
42, 2011, 12, 3572-3576. http://dx.doi.org/10.1007/s11661-011-0906-6.
-
Peterson, Joel; Larsson, Jonas; Mujanovic, Malik; Mattila, Heikki.
Mass Customisation of Flat Knitted Fashion Products: Simulation of the Co-Design Process. Autex Research Journal.
11, 2011, 1, 6-13. http://www.autexrj.com/cms/zalaczone_pliki/2_05_11.pdf.
-
Priha, O.; Laakso, Jarmo; Tapani, K.; Levänen, Erkki; Kolari, M.; Mäntylä, Tapio; Storgårds, E.
Effect of Photocatalytic and Hydrophobic Coatings on Brewery Surface Microorganisms. Journal of Food Protection.
74, 2011, 11, 1891-1901. http://dx.doi.org/10.4315/0362-028X.JFP-11-008.
-
Puranen, Jouni; Lagerbom, Juha; Hyvärinen, Leo; Kylmälahti, Mikko; Himanen, Olli; Pihlatie, Mikko; Kiviaho, Jari; Vuoristo, Petri.
The Structure and Properties of Plasma Sprayed Iron Oxide Doped Manganese Cobalt Oxide Spinel Coatings for SOFC Metallic Interconnectors. Journal of Thermal Spray Technology.
20, 2011, 1-2, 154-159. http://dx.doi.org/10.1007/s11666-010-9598-5.
-
Rashid, Sanuwar; Mattila, Heikki.
Study on the Scope and Opportunities of Category Management for Aligning the Supplier-Retailer Business Strategy. South Asian Journal of Management.
18, 2011, 4, 62-89.
-
Santa-aho, Suvi; Vippola, Minnamari; Sorsa, Aki; Latokartano, Jyrki, Lindgren, Mari; Leiviskä, Kauko; Lepistö, Toivo.
Development of Barkhausen noise calibration blocks for reliable grinding burn detection. Jounal of Materials Processing Technology.
212, 2011, 2, 408-416. http://dx.doi.org/10.1016/j.jmatprotec.2011.10.003.
-
Spotz, Zzdenek; Leemet, Tonu; Rokicki, Pawel; Fusova, Lenka; Saksl, Karel; Kuokkala, Veli-Tapani; Siemers, Carsten.
Analysis of microstructure of annealed alloy ti- 15v-3cr-3sn-3al after deformation. Chemicke Listy.
105, 2011, 16, s586-s588.
-
Sund, Jukka; Alenius, Harri; Vippola, Minnamari; Savolainen, Kai; Puustinen, Anne.
Proteomic Characterization of Engineered Nanomaterial - Protein Interactions in Relation to Surface Reactivity. ACS Nano.
5, 2011, 6, 4300-4309. http://dx.doi.org/10.1021/nn101492k.
-
Tammelin, Tekla; Harlin, Ali; Vehviläinen, Marianna; Nousiainen, Pertti; Kolppo, Kari.
Method to Prepare Smooth and Even Cellulose-lignophenol Films. BioResources.
6, 2011, 3, 2386-2398. http://www.ncsu.edu/bioresources/BioRes_06/BioRes_06_3_2386_Tammelin_HVNK_Novel_Prep_Uniform_Cellulose_Ligno_Films_1443.pdf.
-
Xie, Ming; Zhang, XiaoXue; Wang, Hao.
Square model for charge and discharge behavior of cathode electrode materials. Ionics.
17, 2011, 4, 299-305. http://dx.doi.org/10.1007/s11581-011-0528-4.
-
Zhang, Xiaoxue; Nikkanen, Juha-Pekka; Rintala, J.; Pettersson, M.; Kanerva, T.; Laakso, Jarmo; Levänen, Erkki; Mäntylä, Tapio.
Effect of alumina/iron catalysts with the use of different ferrous compounds on the formation of carbon nanotubes. Journal of Ceramic Science and Technology.
2, 2011, 1, 51-54. http://dx.doi.org/10.4416/JCST2010-00013.
Refereed Journal Articles int'l
2010
-
Aho, Johanna; Rolon-Garrido, Victor H.; Syrjälä, Seppo; Wagner, Manfred H.
Extensional viscosity in uniaxial extension and contraction flow - Comparison of experimental methods and application of the molecular stress function model. Journal of Non-Newtonian Fluid Mechanics.
165, 2010, 5-6, 212-218. http://dx.doi.org/10.1016/j.jnnfm.2009.12.003.
-
Aho, Johanna; Rolon-Garrido, Victor H.; Syrjälä, Seppo; Wagner, Manfred H.
Measurement technique and data analysis of extensional viscosity for polymer melts by Sentmanat extensional rheometer (SER). Rheologica Acta.
49, 2010, 4, 359-370. http://dx.doi.org/10.1007/s00397-010-0439-8.
-
Aho, Johanna; Syrjälä, Seppo.
Measurement of the pressure dependence of viscosity of polymer melts using a back pressure-regulated capillary rheometer. Journal of Applied Polymer Science.
117, 2010, 2, 1076-1084. http://dx.doi.org/10.1002/app.31754.
-
Bolelli, Giovanni; Bonferroni, Benedetta; Koivuluoto, Heli; Lusvarghi, Luca; Vuoristo, Petri.
Depth-sensing indentation for assessing the mechanical properties of cold-sprayed Ta. Surface & Coatings Technology.
205, 2010, 7, 2209-2217. http://dx.doi.org/10.1016/j.surfcoat.2010.08.146.
-
Borg, Tommi; Pääkkönen, Esko J.
Linear viscoelastic models Part IV. From molecular dynamics to temperature and viscoelastic relations using control theory. Journal of Non-Newtonian Fluid Mechanics.
165, 2010, 1-2, 24-31. http://dx.doi.org/10.1016/j.jnnfm.2009.08.008.
-
Bröde, P.; Kuklane, K.; Candas, V.; Hartog, E.; Griefahn, B.; Holmer, I.; Meinander, Harriet; Nocker, W.; Richards, M.; Havenith, G.
Heat gain from thermal radiation through protective clothing with different insulation, reflectivity and vapour permeability. International Journal of Occupational Safety and Ergonomics JOSE.
16, 2010, 2, 231-244.
-
Curtze, Sven; Kuokkala, Veli-Tapani.
Dependence of tensile deformation behavior of TWIP steels on stacking fault energy, temperature and strain rate. Acta Materialia.
58, 2010, 15, 5129-5141. http://dx.doi.org/10.1016/j.actamat.2010.05.049.
-
Curtze, Sven; Kuokkala, Veli-Tapani.
Effects of temperature and strain rate on the tensile properties of twip steels. Revista Materia.
15, 2010, 2, 160-166. http://dx.doi.org/10.1590/S1517-70762010000200011.
-
Guo, Li; Berglin, Lena; Mattila, Heikki.
Textile strain sensors characterization - Sensitivity, linearity, stability adn hysteresis. The Nordic Textile Journal.
2010, 2, 51-63.
-
Hakala, Tomi; Harlin, A.
Case study of the out-of plane shear strength measurement of paper machine clothing. Textile Research Journal.
80, 2010, 19, 2066-2080. http://dx.doi.org/10.1177/0040517510369399.
-
Huttunen-Saarivirta, Elina; Kalidakas, S.; Stott, F.H.; Rohr, V.; Schütze, M.
Erosion-oxidation of uncoated, aluminized and chromized-aluminized 9Cr-1Mo steels under fluidized-bed conditions at 550-700 C. Tribology International.
43, 2010, 1-2, 161-170. http://dx.doi.org/10.1016/j.triboint.2009.05.013.
-
Jönkkäri, Ilari; Syrjälä, Seppo.
Evaluation of techniques for measuring the yield stress of a magnetorheological fluid. Applied Rheology.
20, 2010, 45875, 1-7. http://dx.doi.org/10.3933/ApplRheol-20-45875.
-
Koivuluoto, Heli; Bolelli, Giovanni; Lusvarghi, Luca; Casadei, Fabrizio; Vuoristo, Petri.
Corrosion resistance of cold-sprayed Ta coatings in very aggressive conditions. Surface & Coatings Technology.
205, 2010, 4, 1103-1107. http://dx.doi.org/10.1016/j.surfcoat.2010.02.052.
-
Koivuluoto, Heli; Honkanen, Mari; Vuoristo, Petri.
Cold-sprayed copper and tantalum coatings - Detailed FESEM and TEM analysis. Surface and Coatings Technology.
204, 2010, 15, 2353-2361. http://dx.doi.org/10.1016/j.surfcoat.2010.01.001.
-
Koivuluoto, Heli; Vuoristo, Petri.
Effect of powder type and composition on structure and mechanical properties of Cu + Al2O3 coatings prepared by using low-pressure cold spray coatings. Journal of Thermal Spray Technology.
19, 2010, 5, 1081-1092. http://dx.doi.org/10.1007/s11666-010-9491-2.
-
Koivuluoto, Heli; Vuoristo, Petri.
Structural analysis of cold-sprayed nickel-based metallic and metallic-ceramic coatings. Journal of Thermal Spray Technology.
19, 2010, 5, 975-989. http://dx.doi.org/10.1007/s11666-010-9481-4.
-
Kolli, Tanja; Kanerva, Tomi; Huuhtanen, Mika; Vippola, Minnamari; Kallinen, Kauko; Kinnunen, Toni; Lepistö, Toivo; Lahtinen, Jouko; Keiski, Riitta L.
The activity of Pt/Al2O3 diesel oxidation catalyst after sulphur and calcium treatments. Catalysis Today.
154, 2010, 3-4, 303-307. http://dx.doi.org/10.1016/j.cattod.2009.12.008.
-
Kotiaho, Anne; Lahtinen, Riikka; Efimov, Alexander; Lehtivuori, Heli; Tkachenko, Nikolai V.; Kanerva, Tomi; Lemmetyinen, Helge.
Synthesis and time-resolved fluorescence study of porphyrin-functionalized gold nanoparticles. Journal of Photochemistry and Photobiology, A: Chemistry.
212, 2010, 2-3, 129-134. http://dx.doi.org/10.1016/j.jphotochem.2010.04.005.
-
Maury Ramirez, Anibal; Demeestere, Kristof; De Belie, Nele; Mäntylä, Tapio; Levänen, Erkki.
Titanium dioxide coated cementitious materials fo air purifying purposes: Preparation, characterization and toluene removal potential. Building and Environment.
45, 2010, 4, 832-838. http://dx.doi.org/10.1016/j.buildenv.2009.09.003.
-
Peterson, Joel; Mattila, Heikki.
Mass customisation of knitted fashion garments: Factory boutique Shima - a case study. International Journal of Mass Customisation (IJMASSC).
3, 2010, 3, 247-258. http://dx.doi.org/10.1504/IJMASSC.2010.036797.
-
Puranen, Jouni; Lagerbom, J.; Hyvärinen, Leo; Mäntylä, Tapio; Levänen, Erkki; Kylmälahti, Mikko; Vuoristo, Petri.
Formation and structure of plasma sprayed manganese-cobalt spinel coatings on preheated metallic interconnector plates. Surface & Coatings Technology.
205, 2010, 4, 1029-1033. http://dx.doi.org/10.1016/j.surfcoat.2010.08.030.
-
Pynttäri, Vesa J.; Mäkinen, Riku M.; Palukuru, Vamsi Krishna; Östman, Kauko; Sillanpää, Hannu P.; Kanerva, Tomi; Lepistö, Toivo; Hagberg, Juha; Jantunen, Heli.
Application of wide-band material characterization methods to printable electronics. IEEE Transactions on Electronics Packaging Manufacturing.
33, 2010, 3, 221-227. http://dx.doi.org/10.1109/TEPM.2010.2051809.
-
Rissanen, Marja; Puolakka, Arja; Ahola, Niina; Tonry, Aaron; Rochev, Yury; Kellomäki, Minna; Nousiainen, Pertti.
Effect of protein-loading on properties of wet-spun poly(L,D-lactide) multifilament fibers. Journal of Applied Polymer Science.
116, 2010, 4, 2174-2180. http://dx.doi.org/10.1002/app.31820.
-
Rissanen, Marja; Puolakka, Arja; Hukka, Terttu; Ellä, Ville; Kellomäki, Minna; Nousiainen, Pertti.
Effect of hot drawing on properties of wet-spun poly(L,D-lactide) copolymer multifilament fibers. Journal of Applied Polymer Science.
115, 2010, 1, 608-615. http://dx.doi.org/10.1002/app.31015.
-
Rossi, Elina M.; Pylkkänen, Lea; Koivisto, Antti J.; Vippola, Minnamari; Jensen, Keld A.; Miettinen, Mirella; Sirola, Kristiina; Nykäsenoja, Heli; Karisola, Piia; Stjernvall, Tuula; Vanhala, Esa; Kiilunen, Mirja;¨ Pasanen, Pertti; Mäkinen, Maija; Hämeri, Kaarle; Joutsensaari, Jorma; Tuomi, Timo; Jokiniemi, Jorma; Wolff, Henrik; Savolainen, Kai; Matikainen, Sampsa; Alenius, Harri.
Airway exposure to silica-coated TiO2 nanoparticles induces pulmonary neutrophilia in mice. Toxicological Sciences.
113, 2010, 2, 422-433. http://dx.doi.org/10.1093/TOXSCI/KFP254.
-
Sahu, Puspendu; Curtze, Sven; Das, Arpan; Mahato, B.; Kuokkala, Veli-Tapani; Chowdhury, Sandip Ghosh.
Stability of austenite and quasi-adiabatic heating during high-strain-rate deformation of twinning-induced plasticity steels. Scripta Materialia.
62, 2010, 1, 5-8. http://dx.doi.org/10.1016/j.scriptamat.2009.09.010.
-
Savolainen, K.; Pylkkänen, L.; Norppa, H.; Falck, G.; Lindberg, H.; Tuomi, T.; Vippola, Minnamari; Alenius, H.; Hämeri, K.; Koivisto, J.; Brouwer, D.; Mark, D.; Bard, D.; Berges, M.; Jankowska, E.; Posniak, M.; Farmer, P.; Singh, R.; Krombach, F.; Bihari, P.; Kasper, G.; Seipenbusch, M.
Nanotechnologies, engineered nanomaterials and occupational health and safety - A review. Safety Science.
2010, 48, 957-963. http://dx.doi.org/10.1016/j.ssci.2010.03.006.
-
Schmidt, Dörthe; Dijkman, Petra; Driessen-Mol, Anita; Stenger, Rene; Mariani, Christine; Puolakka, Arja; Rissanen, Marja; Deichmann, Thosten; Odermatt, Bernhard; Weber, Benedikt; Emmert, Maximilian; Zund, Gregor; Baaijens, Frank; Hoerstrup, Simon.
Minimally invasive implantation of living tissue engineered heart valves - A comprehensive approach from autologous vascular cells to stem cells. Journal of the American College of Cardiology.
56, 2010, 6, 510-520. http://dx.doi.org/10.1016/j.jacc.2010.04.024.
-
Sorsa, A.; Leiviskä, K.; Santa-Aho, Suvi; Vippola, Minnamari; Lepistö, Toivo.
A study on laser-prosessed grinding burn simulation and analysis based on Barkhausen noise measurement. Insight.
52, 2010, 6, 293-298. http://dx.doi.org/10.1784/insi.2010.52.6.293.
-
Vehviläinen, Marianna; Kamppuri, Taina; Nousiainen, Pertti; Kallioinen, Anne; Siika-aho, Matti; Christoffersson, Kristina; Rom, Monika; Janicki, Jaroslaw.
Effect of acid and enzymatic treatments fo TCF dissolving pulp on the properties of wet spun cellulosic fibres. Cellulose Chemistry and Technology.
44, 2010, 4-6, 147-152.
-
Zhang, Xiaoxue; Nikkanen, Juha-Pekka; Kanerva, Tomi; Levänen, Erkki; Mäntylä, Tapio.
Comparative Study on Effects of Iron Oxide Doped Alumina-Based Catalysts via Sol-Gel and LFS Methods on CNTs Growth by Methane Decomposition. Materialy Ceramiczne/Ceramic Materials.
64, 2010, 4, 525-528.
Refereed Journal Articles int'l
2009
-
Arra, M., Pääkkönen, E.J. & Härkönen, I.
Solder joint reliability on 3-D MID LCP substrates. Journal of Microelectronics and Electronic Packaging.
6, 2009, pp. 135-142.
-
Borg, T. & Pääkkönen, E.J.
Linear viscoelastic models Part 1. Relaxation modulus and melt calibration. Journal of Non-Newtonian Fluid Mechanics.
156, 2009, 1-2, 121-128. http://dx.doi.org/10.1016/j.jnnfm.2008.07.011.
-
Borg, T. & Pääkkönen, E.J.
Linear viscoelastic models Part II. Recovery of the molecular weight distribution using viscosity data. Journal of Non-Newtonian Fluid Mechanics.
156, 2009, 1-2, 129-138. http://dx.doi.org/10.1016/j.jnnfm.2008.07.010.
-
Borg, T. & Pääkkönen, E.J.
Linear viscoelastic models Part III. Start-up and transient flow effects from the molecular weight distribution. Journal of Non-Newtonian Fluid Mechanics.
159, 2009, 1-3, 17-25. http://dx.doi.org/10.1016/j.jnnfm.2008.11.014.
-
Curtze, S., Kuokkala, V.-T., Hokka, M. & Peura, P.
Deformation behavior of TRIP and DP steels in tension at different temperatures over a wide range of strain rates. Materials Science and Engineering A.
507, 2009, 1-2, 124-131. http://dx.doi.org/10.1016/j.msea.2008.11.050.
-
Eteläaho, P., Nevalainen, K., Suihkonen, R., Vuorinen, J., Hanhi, K. & Järvelä, P.
Effects of direct melt compounding and masterbatch dilution on the structure and properties of nanoclay-filled polyolefins. Polymer Engineering and Science.
49, 2009, 7, pp. 1438-1446. http://dx.doi.org/10.1002/pen.21270.
-
Eteläaho, P., Nevalainen, K., Suihkonen, R., Vuorinen, J. & Järvelä, P.
Effects of two different maleic anhydride-modified adhesion promoters (PP-g-MA) on the structure and mechanical properties of nanofilled polyolefins. Journal of Applied Polymer Science.
114, 2009, 2, pp. 978-992. http://dx.doi.org/10.1002/app.30394.
-
Falck, G.C.M., Lindberg, H.K., Suhonen, S., Vippola, M., Vanhala, E., Catalan, J., Savolainen, K. & Norppa, H.
Genotoxic effects of nanosized and fine TiO2. Human & Experimental Toxicology.
28, 2009, 6-7, 339-352. http://dx.doi.org/10.1177/0960327109105163.
-
Fernandez, M., Munoz, M.E., Santamaria, A., Syrjälä, S. & Aho, J.
Determining the pressure dependency of the viscosity using PVT data: A practical alternative for thermoplastics. Polymer Testing.
28, 2009, 1, pp. 109-113. http://dx.doi.org/10.1016/j.polymertesting.2008.09.008.
-
Heikkilä, A., Kärhä, P., Tanskanen, A., Kaunismaa, M., Koskela, T., Kaurola, J., Ture, T. & Syrjälä, S.
Characterizing a UV chamber with mercury lamps for assessment of comparability to natural UV conditions. Polymer Testing.
28, 2009, 1, pp. 57-65. http://dx.doi.org/10.1016/j.polymertesting.2008.10.005.
-
Heikkilä, P. & Harlin, A.
Electrospinning of polyacrylonitrile (PAN) solution: Effect of conductive additive and filler on the process. Express Polymer Letters.
3, 2009, 7, 437-445. http://dx.doi.org/10.3144/expresspolymlett.2009.53.
-
Hokka, M., Kuokkala, V.-T. & Curtze, S.
Dynamic tensile behaviour of TRIP and DP steels at different temperatures. Steel Research International.
80, 2009, 2, 137-145.
-
Honkanen, M., Hoikkanen, M., Vippola, M., Vuorinen, J. & Lepistö, T.
Metal-plastic adhesion in injection-molded hybrids. Journal of Adhesion Science and Technology.
23, 2009, 13-14, 1747-1761. http://dx.doi.org/10.1163/016942409X12489445844435.
-
Hossain, F. & Mattila, H.
CST - its impact on Bangladesh textile and apparel industry. Textile Asia.
40, 2009, 7-8, 50-55.
-
Huttunen-Saarivirta, E., Kalidakis, S., Stott, F.H., Perez, F.J. & Lepistö, T.
High-temperature erosion-oxidation of uncoated and FB-CVD aluminized and aluminized-siliconized 9Cr-1Mo steel under fluidized-bed conditions. Wear.
2009, 267, pp. 2223-2234. http://dx.doi.org/10.1016/j.wear.2009.08.039.
-
Huttunen-Saarivirta, E., Kuokkala, V.-T., Kokkonen, J. & Paajanen, H.
Corrosion behaviour of aircraft coating systems in acetate- and formate-based de-icing chemicals. Materials and Corrosion.
60, 2009, 3, 173-191. http://dx.doi.org/10.1002/maco.200805038.
-
Koivuluoto, H., Näkki, J. & Vuoristo, P.
Corrosion properties of cold-sprayed tantalum coatings. Journal of Thermal Spray Technology.
18, 2009, 1, pp. 75-82. http://dx.doi.org/10.1007/s11666-008-9281-2.
-
Koivuluoto, H. & Vuoristo, P.
Effect of ceramic particles on properties of cold-sprayed Ni-20Cr-Al2O3 coatings. Journal of Thermal Spray Technology.
18, 2009, 4, pp. 555-562.
-
Kolli, T., Kanerva, T., Lappalainen, P., Huuhtanen, M., Vippola, M., Kinnunen, T., Kallinen, K., Lepistö, T., Lahtinen, J. & Keiski, R.L.
The effect of SO2 and H2O on the activity of Pd/CeO2 and Pd/Zr-CeO2 diesel oxidation catalysts. Topics in Catalysis.
52, 2009, 13-20, 2025-2028. http://dx.doi.org/10.1007/s11244-009-9397-8.
-
Leivo, J., Linden, M., Ritola, M., Vippola, M., Levänen, E. & Mäntylä, T.
Influence of thermal treatment conditions on the formation of phase-pure mullite derived from a nanoparticulate aluminosilicate precursor. Materials Chemistry and Physics.
115, 2009, 1, 56-64. http://dx.doi.org/10.1016/j.matchemphys.2008.11.018.
-
Lindberg, H.K., Falck, G.C.-M., Suhonen, S., Vippola, M., Vanhala, E., Catalan, J., Savolainen, K. & Norppa, H.
Genotoxicity of nanomaterials: DNA damage and micronuclei induced by carbon nanotubes and graphite nanofibres in human bronchial epithelial cells in vitro. Toxicology Letters.
186, 2009, 3, 166-173. http://dx.doi.org/10.1016/j.toxlet.2008.11.019.
-
Mattila, R.H., Laurila, P., Rekola, J., Gunn, J., Lassila, L.V.J, Mäntylä, T., Aho, A.J. & Vallittu, P.K.
Bone attachment to glass-fibre-reinforced composite implant with porous surface. Acta Biomaterialia.
5, 2009, 5, pp. 1639-1646. http://dx.doi.org/10.1016/j.actbio.2009.01.020.
-
Nevalainen, K., Suihkonen, R., Eteläaho, P., Vuorinen, J., Järvelä, P., Isomäki, N., Hintze, C. & Leskelä, M.
Mechanical and tribological property comparison of melt-compounded nanocomposites of atomic-layer-deposition-coated polyamide particles and commercial nanofillers. Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films.
27, 2009, 4, 929-936. http://dx.doi.org/10.1116/1.3072920.
-
Nevalainen, K., Vuorinen, J., Villman, V., Suihkonen, R., Järvelä, P., Sundelin, J. & Lepistö, T.
Characterization of twin-screw-extruder-compounded polycarbonate nanoclay composites. Polymer Engineering and Science.
49, 2009, 4, pp. 631-640. http://dx.doi.org/10.1002/pen.21086.
-
Nurminen, J., Näkki, J. & Vuoristo, P.
Microstructure and properties of hard and wear resistant MMC coatings deposited by laser cladding. International Journal of Refractory Metals & Hard Materials.
27, 2009, 2, 472-478. http://dx.doi.org/10.1016/j.ijrmhm.2008.10.008.
-
Paakinaho, K., Ellä, V., Syrjälä, S. & Kellomäki, M.
Melt spinning of poly(L/D)lactide 96/4: Effects of molecular weight and melt processing on hydrolytic degradation. Polymer Degradation and Stability.
94, 2009, 3, 438-442. http://dx.doi.org/10.1016/j.polymdegradstab.2008.11.010.
-
Rämö, J., Kuokkala, V.-T. & Vuoristo, T.
Influence of strain rate and adiabatic heating on the deformation behavior of cold heading steels. Journal of Materials Processing Technology.
209, 2009, 11, 5186-5194. http://dx.doi.org/10.1016/j.jmatprotec.2009.03.004.
-
Rissanen, M., Puolakka, A., Hukka, T., Ellä, V., Nousiainen, P. & Kellomäki, M.
Effect of process parameters on properties of wet-spun Poly(L,D-lactide) copolymer multifilament fibers. Journal of Applied Polymer Science.
113, 2009, 4, pp. 2683-2692. http://dx.doi.org/10.1002/app.30387.
-
Santa-aho, S., Vippola, M., Lepistö, T. & Lindgren, M.
Characterisation of case-hardened gear steel by multiparameter Barkhausen noise measurements. Insight.
51, 2009, 4, 211-216. http://dx.doi.org/10.1784/insi.2009.51.4.212.
-
Terva, J., Teeri, T., Kuokkala, V.-T., Siitonen, P. & Liimatainen, J.
Abrasive wear of steel against gravel with different rock-steel combinations. Wear.
267, 2009, 11, pp. 1821-1831. http://dx.doi.org/10.1016/j.wear.2009.02.019.
-
Tiusanen, J., Rissa, K., Ritvonen, T., Lagerbom, J., Keskiaho, K. & Lepistö, T.
Characterization of functional gradient structures in duplex stainless steel castings. Estonian Journal of Engineering.
15, 2009, 4, 293-300. http://dx.doi.org/10.3176/eng.2009.4.06.
-
Toivola, M., Ferenets, M., Lund, P. & Harlin, A.
Photovoltaic fiber. Thin Solid Films.
517, 2009, 8, pp. 2799-2802. http://dx.doi.org/10.1016/j.tsf.2008.11.057.
-
Vippola, M., Falck, G.C.M., Lindberg, H.K., Suhonen, S., Vanhala, E., Norppa, H., Savolainen, K., Tossavainen, A. & Tuomi, T.
Preparation of nanoparticle dispersions for in-vitro toxicity testing. Human & Experimental Toxicology.
28, 2009, 6-7, 377-385. http://dx.doi.org/10.1177/0960327109105158.
-
Zhang, X., Ge, Y., Hannula, S-P., Levänen, E. & Mäntylä, T.
Process study on the formation of nanocrystalline α-alumina with novel morphology at 1000 °C. Journal of Materials Chemistry.
19, 2009, 1915-1922. http://dx.doi.org/10.1039/b819592g.
-
Zhang, X., Honkanen, M., Pore, V., Levänen, E. & Mäntylä, T.
Effect of heat treating gel films on the formation of superhydrophobic boehmite flaky structures on austenitic stainless steel. Ceramics International.
35, 2009, 1559-1564. http://dx.doi.org/10.1016/j.ceramint.2008.08.010.
-
Zhao, D.S., Moritz, N., Laurila, P., Mattila, R., Lassila, L.V.J., Strandberg, N., Mäntylä, T., Vallittu, P. & Aro, H.T.
Development of a multi-component fiber-reinforced composite implant for load-sharing conditions. Medical Engineering & Physics.
31, 2009, 461-469. http://dx.doi.org/10.1016/j.medengphy.2008.11.006.
Refereed Journal Articles int'l
2008
-
Aho, J. & Syrjälä, S.
Evaluation of different methods for determining the entrance pressure drop in capillary rheometry. Applied Rheology.
18, 2008, Iss. 6, 63258, 5 p. http://dx.doi.org/10.3933/ApplRheol-18-63258.
-
Aho, J. & Syrjälä, S.
On the measurement and modeling of viscosity of polymers at low temperatures. Polymer Testing.
27, 2008, 1, pp. 35-40. http://dx.doi.org/10.1016/j.polymertesting.2007.08.004.
-
Bihari, P., Vippola, M., Schultes, S., Praetner, M., Khandoga, A.G., Reichel, C.A., Coester, C., Tuomi, T., Rehberg, M. & Krombach, F.
Optimized dispersion of nanoparticles for biological in vitro and in vivo studies. Particle and Fibre Toxicology.
5, 2008, 14 p. http://dx.doi.org/10.1186/1743-8977-5-14.
-
Bröde, P., Kuklane, K., Candas, V., den Hartog, E., Griefahn, B., Holmer, I., Meinander, H., Nocker, W., Richards, M. & Havenith, G.
Heat transfer through protective clothing under symmetric and asymmetric long wave thermal radiation. Zeitschrift für Arbeitswissenschaft.
62, 2008, 4, pp. 237-276.
-
Celcar, D., Meinander, H. & Gersak, J.
A study of the influence of different clothing materials on heat and moisture transmission through clothing materials, evaluated using a sweating cylinder. International Journal of Clothing Science and Technology.
20, 2008, 1 and 2, pp. 119-130. http://dx.doi.org/10.1108/09556220810850496.
-
Celcar, D., Meinander, H. & Gersak, J.
Heat and moisture transmission properties of clothing systems evaluated by using a sweating thermal manikin under different environmental conditions. International Journal of Clothing Science and Technology.
20, 2008, 4, pp. 240-252.
-
Hakala, T. & Harlin, A.
Simulation of a rapid nip pressure strike and its effect on press felt samples. Autex Research Journal.
8, 2008, 3, pp. 84-85.
-
Harju, M., Areva, S., Rosenholm, J.B. & Mäntylä, T.
Characterization of water exposed plasma sprayed oxide coating materials using XPS. Applied Surface Science.
254, 2008, 18, pp. 5981-5989. http://dx.doi.org/10.1016/j.apsusc.2008.03.168.
-
Harju, M., Järn, M., Dahlsten, P., Nikkanen, J-P., Rosenholm, J.B. & Mäntylä, T.
Influence of long-term aqueous exposure on surface properties of plasma-sprayed oxides Cr2O3 and Cr2O3-25 wt% TiO2. Journal of Colloid and Interface Science.
326, 2008, 2, pp. 403-410. http://dx.doi.org/10.1016/j.jcis.2008.06.010.
-
Harju, M., Järn, M., Dahlsten, P., Rosenholm, J.B. & Mäntylä, T.
Influence of long-term aqueous exposure on surface properties of plasma sprayed oxides Al2O3, TiO2 and their mixture Al2O3-13TiO2. Applied Surface Science.
254, 2008, 22, pp. 7272-7279. http://dx.doi.org/10.1016/j.apsusc.2008.05.312.
-
Heikkilä, P. & Harlin, A.
Parameter study of electrospinning of polyamide-6. European Polymer Journal.
44, 2008, 10, pp. 3067-3079. http://dx.doi.org/10.1016/j.eurpolymj.2008.06.032.
-
Heikkilä, P., Taipale, A., Lehtimäki, M. & Harlin, A.
Electrospinning of polyamides with different chain compositions for filtration application. Polymer Engineering and Sciene.
48, 2008, 6, pp. 1168-1176. http://dx.doi.org/10.1002/pen.21070.
-
Honkanen, M., Vippola, M. & Lepistö, T.
Low temperature oxidation of copper alloys - AEM and AFM characterization. Journal of Materials Science.
42, 2008, 12, pp. 4684-4691. http://dx.doi.org/10.1007/s10853-006-0351-x.
-
Honkanen, M., Vippola, M. & Lepistö, T.
Oxidation of copper alloys studied by analytical transmission electron microscopy cross-sectional specimens. Journal of Materials Research.
23, 2008, 5, pp. 1350-1357. http://dx.doi.org/10.1557/JMR.2008.0160.
-
Huttunen-Saarivirta, E., Kuokkala, V.-T., Kokkonen, J. & Paajanen, H.
Corrosion behaviour of aircraft materials in acetate and formate based antiskid chemicals. Corrosion Engineering, Science and Technology.
43, 2008, 1, pp. 64-80. http://dx.doi.org/10.1179/174327808X286185.
-
Jussila, P., Lahtonen, K., Lampimäki, M., Hirsimäki, M., Honkanen, M., Lepistö, T., Taskinen, P. & Valden, M.
Ag/Cu(100) surface alloy and polycrystalline Cu(Ag) alloy studied by XPS. Surface Science Spectra.
15, 2008, 1, 10 p. http://dx.doi.org/10.1116/11.20060701.
-
Kettunen, P., Kettunen, H., Sarkkinen, M., Henttu, P. & Rissa, K.
Softwood degradation after being several thousand years in shore front mud. Materials Science Forum.
599, 2008, pp. 159-171. http://dx.doi.org/10.4028/www.scientific.net/MSF.599.159.
-
Kettunen, P., Vuoristo, T. & Kaasalainen, T.
Monotonic strength properties of Siberian yellow pine. Materials Science Forum.
599, 2008, pp. 137-142. http://dx.doi.org/10.4028/www.scientific.net/MSF.599.137.
-
Koivuluoto, H., Lagerbom, J., Kylmälahti, M. & Vuoristo, P.
Microstructure and mechanical properties of low-pressure cold-sprayed (LPCS) coatings. Journal of Thermal Spray Technology.
17, 2008, 5-6, pp. 721-727. http://dx.doi.org/10.1007/s11666-008-9245-6.
-
Leivo, J., Linden, M., Rosenholm, J.M., Ritola, M., Teixeira, C.V., Levänen, E. & Mäntylä, T.A.
Evolution of aluminosilicate structure and mullite crystallization from homogeneous nanoparticulate sol-gel precursor with organic additives. Journal of the European Ceramic Society.
2008, 2007.12.033, pp. 1749-1762. http://dx.doi.org/10.1016/j.jeurceramsoc.2007.12.033.
-
Leivo, J., Varis, T.E., Turunen, E., Vippola, M., Rissa, K., Kanerva, U., Silvonen, J. & Mäntylä, T.
Influence of the elementary mixing scale on HVOF-sprayed coatings derived from nanostructured aluminosilicate/Mullite feedstock. Surface & Coatings Technology.
203, 2008, 3-4, pp. 335-344. http://dx.doi.org/10.1016/j.surfcoat.2008.09.008.
-
Mattila, H.
Gospodarstvo i trziste, Uspjeh Kine na polju tekstila - mozemo li ga podijeliti?. Tekstil.
56, 2008, 7, pp. 473-476.
-
Meinander, H.
Haptic sensing in intelligent textile development. Advances in Science and Technology.
60, 2008, 2, pp. 123-127.
-
Memedovic, O. & Mattila H.
The global leather value chain: the industries, the main actors and prospects for upgrading in LDCs. International Jounal of Technological Learning, Innovation and Development.
1, 2008, 4, pp. 482-519. http://dx.doi.org/10.1504/IJTLID.2008.021965.
-
Nevalainen, K., Hintze, C., Suihkonen, R., Sundelin, J., Eteläaho, P., Vuorinen, J., Järvelä, P. & Isomäki, N.
Thermal and rheological behaviour comparison of melt-compounded nanocomposites of atomic-layer-deposition-coated polyamide particles and commercial nanofillers. Journal of nanostructured Polymers and Nanocomposites.
4, 2008, 4, pp. 128-138.
-
Nikkanen, J.-P., Keskinen, H., Aromaa, M., Järn, M., Kanerva, T., Levänen, E., Mäkelä, J.M. & Mäntylä, T.
Iron oxide doped alumina-zirconia nanoparticles synthesis by liquid flame spray from metal organic precursors. Research Letters in Nanotechnology.
2008, 2008, 516478, 4 p. http://dx.doi.org/10.1155/2008/516478.
-
Nikkola, L., Vapalahti, K., Huolman, R., Seppälä, J., Harlin, A. & Ashammakhi, N.
Multilayer implant with triple drug releasing properties. Journal of Biomedical Nanotechnology.
4, 2008, 3, pp. 331-338. http://dx.doi.org/10.1166/jbn.2008.337.
-
Richards, M.G.M., Rossi, R., Meinander, H., Broede, P., Candas, V., den Hartog, E., Holmer, I., Nocker. W. & Havenith, G.
Dry and wet heat transfer through clothing dependent on the clothing properties under cold conditions. International Journal of Occupational Safety and Ergonomics (JOSE).
14, 2008, 1, pp. 69-76.
-
Rissanen, M., Puolakka, A., Nousiainen, P., Kellomäki, M. & Ellä, V.
Solubility and phase separation of poly-L,D-lactide copolymers. Journal of Applied Polymer Science.
110, 2008, 4, pp. 2399-2404. http://dx.doi.org/10.1002/app.28769.
-
Ristolainen, N., Heikkilä, P., Harlin, A. & Seppälä, J.
Electrospun nanofibers prepared by two methods: in situ emulsion polymerized PVA/nanoTIO2 and mixing of funcional-PVA with nanoTIO2. Autex Research Journal.
8, 2008, 2, pp. 35-40.
-
Santa-Aho, S., Lindgren, M. & Lepistö, T.
Characterisation of antibacterial silver coatings produced by selective electrolysis on stainless steel. International Heat Treatment and Surface Engineering.
2, 2008, 1, pp. 23-26. http://dx.doi.org/10.1179/174951508X309783.
-
Takala, M., Karttunen, M., Pelto, J., Salovaara, P., Munter, T., Honkanen, M., Auletta, T. & Kannus, K.
Thermal, mechanical and dielectric properties of nanostructured epoxy-polyhedral oligomeric silsesquioxane composites. IEEE Transactions on Dielectrics and Electrical Insulation.
15, 2008, 5, pp. 1224-1235.
-
Vehviläinen, M., Kamppuri, T., Rom, M., Janicki, J., Ciechanska, D., Grönqvist, S., Siika-aho, M., Elg Christoffersson, K. & Nousiainen, P.
Effect of wet spinning parameters on the properties of novel cellulosic fibres. Cellulose.
2008, 10 p. http://dx.doi.org/10.1007/s10570-008-9219-3.
-
Zhang, X., Ge, Y., Hannula, S.-P., Levänen, E. & Mäntylä, T.
Nanocrystalline alpha-alumina with novel morphology at 1000 °C. Journal of Materials Chemistry.
18, 2008, pp. 2423-2425. http://dx.doi.org/10.1039/b803997f.
-
Zhang, X., Honkanen, M., Järn, M., Peltonen, J., Pore, V., Levänen, E. & Mäntylä, T.
Thermal stability of the structural features in the superhydrophobic boehmite films on austenitic stainless steels. Applied Surface Science.
254, 2008, 16, pp. 5129-5133. http://dx.doi.org/10.1016/j.apsusc.2008.02.053.
-
Zhang, X., Honkanen, M., Levänen, E. & Mäntylä, T.
Transition alumina nanoparticles and nanorods from boehmite nanoflakes. Journal of Crystal Growth.
310, 2008, pp. 3674-3679. http://dx.doi.org/10.1016/j.crysgro.2008.05.016.
-
Zhang, X., Järn, M., Peltonen, J., Pore, V., Vuorinen, T., Levänen, E. & Mäntylä, T.
Analysis of roughness parameters to specify superhydrophobic antireflective boehmite films made by the sol-gel process. Journal of the European Ceramic Society.
28, 2008, 11, pp. 2177-2181. http://dx.doi.org/10.1016/j.jeurceramsoc.2008.02.020.
Refereed Journal Articles int'l
2007
-
Fabrin, P.A., Hoikkanen, M.E & Vuorinen, J.E.
Adhesion of thermoplastic elastomer on surface treated aluminum by injection molding. Polymer Engineering and Science.
47, 2007, 8, pp. 1187-1191. http://dx.doi.org/10.1002/pen.20801.
-
Harju, M., Halme, J., Järn, M., Rosenholm, J.B. & Mäntylä, T.
Influence of aqueous aging on surface properties of plasma sprayed oxide coatings. Journal of Colloid and Interface Science.
313, 2007, pp. 194-201. http://dx.doi.org/10.1016/j.jcis.2007.04.044.
-
Heikkilä, A., Tanskanen, A., Kärhä, P. & Hanhi, K.
Adjusting timing of weathering test to account for seasonal variations in UV exposure. Polymer Degradation and Stability.
2007, 92, pp. 675-683. http://dx.doi.org/10.1016/j.polymdegradstab.2006.12.015.
-
Huttunen-Saarivirta, E., Stott, F.H., Rohr, V. & Schutze, M.
Erosion-oxidation behavior of chromized-aluminized 9% chromium steel under fluidized-bed conditions at elevated temperature. Oxidation of Metals.
68, 2007, pp. 113-132. http://dx.doi.org/10.1007/s11085-007-9064-z.
-
Huttunen-Saarivirta, E., Stott, F.H., Rohr, V. & Schütze, M.
Erosion-oxidation behaviour of pack-aluminized 9% chromium steel under fluidized-bed conditions at elevated temperature. Corrosion Science.
49, 2007, 7, pp. 2844-2865. http://dx.doi.org/10.1016/j.corsci.2006.12.024.
-
Kanerva, T., Kröger, V., Rahkaamaa-Tolonen, K., Vippola, M., Lepistö, T. & Keiski, R.L.
Structural changes in air aged and poisoned diesel catalysts. Topics in Catalysis.
45, 2007, 1-4, pp. 137-142. http://dx.doi.org/10.1007/s11244-007-0254-3.
-
Kanerva, U., Lagerbom, J. & Vuoristo, P.
Development of thermal spray powders for improved tribological and corrosive applications and cost-effective solutions. International Journal of Materials and Product Technology.
28, 2007, 3, pp. 377-398.
-
Keskinen, E., Kuokkala, V.-T., Vuoristo, T. & Martikainen, M.
Multi-body wave analysis of axially elastic rod systems. Proceedings of the Institution of Mechanical Engineers, Part K. Journal of Multi-body Dynamics.
2007, pp. 417-428. http://dx.doi.org/10.1243/14644193JMBD75.
-
Keskinen, H., Mäkelä, J.M., Aromaa, M., Ristimäki, J., Kanerva, T., Levänen, E., Mäntylä, T. & Keskinen, J.
Effect of silver addition on the formation and deposition of titania nanoparticles produced by liquid flame spray. Journal of Nanoparticle Research.
9, 2007, pp. 569-588. http://dx.doi.org/10.1007/s11051-006-9073-x.
-
Koivuluoto, H., Lagerbom, J., Vuoristo, P.
Microstructural studies of cold sprayed copper, nickel, and nickel-30% copper coatings. Journal of Thermal Spray Technology.
16, 2007, 4, pp. 488-497. http://dx.doi.org/10.1007/s11666-007-9060-5.
-
Kröger, V., Kanerva, T., Lassi, U., Rahkamaa-Tolonen, K., Lepistö, T., & Keiski, R.L.
Phosphorus poisoning of ZSM-5 and Pt/ZSM-5 zeolite catalysts in diesel exhaust gas conditions. Topics in Catalysis.
42-43, 2007, 112244, pp. 433-436. http://dx.doi.org/10.1007/s11244-007-0220-0.
-
Kröger, V., Kanerva, T., Lassi, U., Rahkamaa-Tolonen, K., Vippola, M. & Keiski, R.L.
Characterization of phosphorus poisoning on diesel exhaust gas catalyst components containing oxide and Pt. Topics in Catalysis.
45, 2007, 1-4, pp. 153-157. http://dx.doi.org/10.1007/s11244-007-0257-0.
-
Marcocsan, N., Nylen, P., Turunen, E., Vuoristo, P., Wigren, J.
Thermal spraying in Europe's Nordic region. Journal of Thermal Spray Technology.
16, 2007, 4, pp. 463-464. http://dx.doi.org/10.1007/s11666-007-9134-4.
-
Montalban, L.S., Henttu, P. & Piche, R.
Recurrence quantification analysis of electrochemical noise data during pit development. International Journal of Bifurcation and Chaos (IJBC).
17, 2007, 10, pp. 3725-3728.
-
Nevalainen, K., MacKerron, D.H., Everall, N.J. & Kuusipalo, J.
The microstructure of a polyethylene terephthalate matrix near to a void under uniaxial draw. Materials Chemistry and Physics.
101, 2007, 1, pp. 103-111.
-
Nikkanen, J-P., Kanerva, T. & Mäntylä, T.
The effect of acidity in low-temperature synthesis of titanium dioxide. Journal of Crystal Growth.
304, 2007, pp. 179-183. http://dx.doi.org/10.1016/j.jcrysgro.2007.02.012.
-
Nyberg, H., Kuokkala, V.-T., Rämö, J. & Järviniemi, A.
A dynamic calibration method for crusher gauges based on material testing. Propellants, Explosives, Pyrotechnics.
32, 2007, 1, pp. 61-67. http://dx.doi.org/10.1002/prep.200700008.
-
Pastila, P., Lassila, L.V.J., Jokinen, M., Vuorinen, J., Vallittu, P.K. & Mäntylä, T.
Effect of short-term water storage on the elastic properties of some dental restorative materials - A resonant ultrasound spectroscopy study. Dental Materials.
23, 2007, pp. 878-884. http://dx.doi.org/10.1016/j.dental.2006.05.006.
-
Vuoristo, P., Nylen, P.
Industrial and research activities in thermal spray technology in the Nordic Region of Europe. Journal of Thermal Spray Technology.
16, 2007, 4, pp. 466-471. http://dx.doi.org/10.1007/s11666-007-9136-2.
Refereed Journal Articles int'l
2006
-
Harju, M., Levänen, E. & Mäntylä, T.
Wetting behaviour of plasma sprayed oxide coatings. Applied Surface Science.
252, 2006, pp. 8514-8520.
-
Hokka, M., Kuokkala, V.-T., Curtze, S., Vuoristo, T. & Apostol, M.
Characterization of strain rate and temperature dependent mechanical behavior of TWIP steels. Journal de Physique IV.
134, 2006, pp. 1301-1306. http://dx.doi.org/10.1051/jp4:2006134197.
-
Huttunen-Saarivirta, E., Rohr, V., Stott, F.H. & Schütze, M.
Influence of glass bead blasting of 9%Cr steel substrate on development of aluminide diffusion coatings. Surface Engineering.
22, 2006, 6, pp. 472-480. http://dx.doi.org/10.1179/174327806X124726.
-
Huttunen-Saarivirta, E., Stott, F.H., Rohr, V. & Schutze, M.
Degradation mechanism of aluminium diffusion coatings on 12% chromium steels under elevated temperature erosion-oxidation conditions. Materials at high temperatures.
23, 2006, 1, pp. 1-11.
-
Huttunen-Saarivirta, E., Stott, F.H., Rohr, V. & Schutze, M.
Particle angularity effects on the elevated-temperature erosion-oxidation behaviour of aluminium diffusion coatings on 9% Cr steel. Wear.
261, 2006, 7-8, pp. 746-759. http://dx.doi.org/10.1016/j.wear.2006.01.014.
-
Keskinen, H., Mäkelä, J.M., Aromaa, M., Keskinen, J., Areva, S., Teixeira, C.V., Rosenholm, J.B., Pore, V., Ritala, M., Leskelä, M., Raulio, M., Salkinoja-Salonen, M., Levänen, E. & Mäntylä, T.
Titania and titania-silver nanoparticle deposits made by Liquid Flame Spray and their functionality as photocatalyst for organic- and biofilm removal. Catalysis Letters.
111, 2006, 3-4, pp. 127-132. http://dx.doi.org/10.1007/s10562-006-0138-3.
-
Lamminmäki, J., Li, S. & Hanhi, K.
Feasible incorporation of devulcanized rubber waste in virgin natural rubber. Journal of Materials Science.
41, 2006, 24, pp. 8301-8307.
-
Leivo, J., Lindén, M., Teixeira, C.V., Puputti, J., Rosenholm, J., Levänen, E. & Mäntylä, T.A.
Sol-gel synthesis of a nanoparticulate aluminosilicate precursor for homogeneous mullite ceramics. Journal of Materials Research.
21, 2006, 5, pp. 1279-1285.
-
Leivo, J., Meretoja, V., Vippola, M., Levänen, E., Vallittu, P. & Mäntylä, T.A.
Sol-gel derived aluminosilicate coatings on alumina as substrate for osteoblasts. Acta Biomaterialia.
2, 2006, pp. 659-668.
-
Levänen, E.
Colloidal prosessing of powder for membrane appliccations. Advances in Science and Technology.
45, 2006, pp. 382-389.
-
Lindgren, M. & Lepistö, T.
Barkhausen noise evaluation of fatigue in high strength steel. International Journal of Materials and Product Technology.
26, 2006, 1/2, pp. 140-151.
-
Mäkelä, J., Hellsten, S., Silvonen, J., Vippola, M., Levänen, E. & Mäntylä, T.
Collection of liquid flame spray generated TiO2 nanoparticles on stainless steel surface. Materials Letters.
2006, 60, pp. 530-534.
-
Peltola, P., Välipakka, E., Vuorinen, J., Syrjälä, S. & Hanhi, K.
Effect of rotational speed of twin screw extruder on the microstructure and rheological and mechanical properties of nanoclay-reinforced polypropylene nanocomposites. Polymer Engineering and Science.
46, 2006, 8, pp. 995-1000.
-
Rissa, K., Lepistö, T. & Yrjölä, K.
Effect of kaolin content on structure and functional properties of water-based coatings. Progress in Organic Coatings.
55, 2006, 55, pp. 137-141.
-
Sundelin, J.J., Nurmi, S.T., Lepistö, T.K. & Ristolainen, E.O.
Mechanical and microstructural properties of SnAgCu solder joints. Materials Science and Engineering.
A420, 2006, A420, pp. 55-62.
-
Sundelin, J.J., Nurmi, S.T., Lepistö, T.K. & Ristolainen, E.O.
Microstructure, creep properties, and failure mechanism of SnAgCu solder joints. Journal of Electronic Materials.
35, 2006, 7, pp. 1600-1606.
-
Suutala, J., Tuominen, J. & Vuoristo, P.
Laser-assisted spraying and laser treatment of thermally sprayed coatings. Surface & Coatings Technology.
201, 2006, pp. 1981-1987.
-
Teeri, T., Kuokkala, V.-T., Siitonen, P., Kivikytö-Reponen, P. & Liimatainen, J.
Impact wear in mineral crushing. Proceedings of the Estonian Academy of Sciences.
12, 2006, 4, pp. 408-418.
Refereed Journal Articles int'l
2005
-
Ahmaniemi, S., Vuoristo, P., Mäntylä, T., Gualco, C., Bonadei, A. & Di Maggio, R.
Thermal cycling resistance of modified thick thermal barrier coatings. Surface & Coatings Technology.
190, 2005, pp. 378-387.
-
Cernuschi, F., Lorenzoni, L., Ahmaniemi, S., Vuoristo, P. & Mäntylä, T.
Studies of the sintering kinetics of thick thermal barrier coatings by thermal diffusivity measurements. Journal of the European Ceramic Society.
25, 2005, pp. 393-400.
-
Czuryszkiewicz, T., Areva, S., Honkanen, M. & Linden, M.
Synthesis of sol-gel silica materials providing a slow release of biphosphonate. Colloids and Surfaces A, Physicochem. Eng. Aspects.
254, 2005, pp. 69-74.
-
Harju, M., Mäntylä, T., Vähä-Heikkilä, K. & Lehto, V.
Water adsorption on plasma sprayed transition metal oxides. Applied Surface Science.
249, 2005, pp. 115-126.
-
Huttunen-Saarivirta, E. & Tiainen, T.
Autocatalytic tin plating in the fabrication of tin-coated copper tube. Journal of Materials Processing Technology.
170, 2005, pp. 211-219.
-
Huttunen-Saarivirta, E. & Vuorinen, J.
Preparation and characterisation of melt-spun Al-Cu-Fe quasicrystals. Intermetallics.
13, 2005, pp. 885-895.
-
Li, S., Lamminmäki, J. & Hanhi, K.
Effect of ground rubber powder and devulcanizates on th properties of natural rubber compounds. Journal of Applied Polymer Science.
97, 2005, pp. 280-217.
-
Li, S., Lamminmäki, J. & Hanhi, K.
Improvement of mechanical properties of rubber compounds using waste rubber / virgin rubber. Polyer Engineering and Science.
2005, pp. 1239-1246.
-
Nurmi, S., Sundelin, J., Ristolainen, E. & Lepistö, T.
The effect of PCB surface finish on lead-free solder joints. Soldering & Surface Mount Technology.
17, 2005, 1, pp. 13-23. http://dx.doi.org/10.1108/09540910510579203.
-
Pastila, P., Helanti, V., Nikkilä, A.-P. & Mäntylä, T.
Microstructural determination in some SiC based hot gas filter materials. Advances in Applied Ceramics.
104, 2005, 2, pp. 65-72.
-
Sundelin, J.J., Nurmi, S.T., Lepistö, T.K. & Ristolainen, E.O.
Effect of PCB surface finish on creep properties of lead-free solder joints. Soldering & Surface Mount Technology.
17, 2005, 4, pp. 3-9.
Refereed Journal Articles int'l
2004
-
Ahmaniemi, S., Tuominen, J., Vippola, M., Vuoristo, P., Mäntylä, T., Cernuschi, F., Gualco, C., Bonadei, A. & Di Maggio, R.
Characterization of Modified Thick Thermal Barrier Coatings. Journal of Thermal Spray Technology.
13, 2004, 3, pp. 361-369.
-
Ahmaniemi, S., Vippola, M., Vuoristo, P., Mäntylä, T., Cernuschi, F. & Lutterotti, L.
Modified thick thermal barrier coatings: Microstructural characterization. Journal of the European Ceramic Society.
2004, 24, s. 2247-2258.
-
Ahmaniemi, S., Vuoristo, P. & Mäntylä, T.
Mechanical and elastic properties of modified thick thermal barrier coatings. Materials Science and Engineering A.
2004, 366, s. 175-182.
-
Ahmaniemi, S., Vuoristo, P., Mäntylä, T., Cernuschi, F. & Lorenzoni, L.
Modified thick thermal barrier coatings: Thermophysical characterization. Journal of the European Ceramic Society.
2004, 24, s. 2669-2679.
-
Cernuschi, F., Ahmaniemi, S., Vuoristo, P. & Mäntylä, T.
Modelling of thermal conductivity of porous materials: application to thick thermal barrier coatings. Journal of the European Ceramic Society.
2004, 24, s. 2657-2667.
-
Harju, M., Levänen, E., Mäntylä, T.
Surface characterization of plasma sprayed oxide materials: estimation of surface acidity using mass titration. Journal of Colloid and Interface Science.
276, 2004, pp. 346-353.
-
Huttunen-Saarivirta, E.
Microstructure, fabrication and prperties of quasicrystalline Al-Cu-Fe alloys: a review. Journal of Alloys and Compounds.
363, 2004, pp. 150-174.
-
Huttunen-Saarivirta, E. & Tiainen, T.
Corrosion behaviour of Al-Cu-Fe alloys containing a quasicrystalline phase. Materials Chemistry and Physics.
85, 2004, pp. 383-395.
-
Huttunen-Saarivirta, E., Turunen, E. & Kallio, M.
Influence of Cr alloying on the microstructure of thermally sprayed quasicrystalline Al-Cu-Fe coatings. Intermetallics.
11, 2004, pp. 879-891.
-
Leivo, E., Wilenius, T., Kinos, T., Vuoristo, P. & Mäntylä T.
Properties of thermally sprayed fluoropolymer PVDF, ECTFE, PFA and FEP coatings. Progress in Organic Coatings.
2004, 49, s. 69-73.
-
Li, S., Lamminmäki, J. & Hanhi, K.
Effect of ground rubber powder on the properties of nature rubber. Macromolecular symposia.
216, 2004, pp. 209-216.
-
Lindgren, M. & Lepistö, T.
Effect of cyclic deformation on Barkhausen noise in a mild steel. NDT&E International.
36, 2004, pp. 401-409.
-
Lindgren, M. & Lepistö, T.
On the stress vs. Barkhausen noise relation in a duplex strainless steel. NDT&E International.
37, 2004, pp. 403-410.
-
Mikkola, P., Ylhä, P., Levänen, E. & Rosenholm, J.B.
Effect of impurities on dispersion properties of alpha-alumina powder. Ceramics International.
30, 2004, s. 291-299.
-
Perttula, J.
Wootz Damascus steel of ancient orient. Scandinavian Journal of Metallurgy.
33, 2004, pp. 92-97.
-
Saikko, V., Calonius, O. & Keränen, J.
Effect of slide track shape on the wear of ultra-high molecular weight polyethylene in a pin-on-disk wear simulation of total hip prosthesis. Journal of Biomedical Materials Research Part B: Applied Biomaterials.
69B, 2004, pp. 141-148.
-
Uusitalo, M.A., Vuoristo, P.M.J. & Mäntylä, T.A.
High temperature corrosion of coatings and boiler steels below chlorine-containíng salt deposits. Corrosion Science.
2004, 46, s. 1311-1331.
-
Vuoristo, T., Apostol, M., Kuokkala, V.-T. & Peura, P.
Behavior of hot dip galvanized dual phase sheets steels at high rates of deformation. Journal de physique IV.
110, 2004, pp. 213-218.
-
Vuoristo, T. & Kuokkala, V.-T.
Effect of strain rate, moisture and temperature on the deformation behavior of of polymer roll covers. Experimental mechanics.
44, 2004, 3, pp. 313-319.
Refereed Journal Articles int'l
2003
-
Apostol, M., Vuoristo, T. & Kuokkala, V.-T.
High temperature high strain rate testing with a compressive SHPB. Journal de physique IV.
110, 2003, pp. 459-464.
-
Gao, N., Huttunen-Saarivirta, E., Tiainen, T. & Hemmilä, M.
Influence of prior deformation on the age hardening of a phosphorus-containing Cu-0.61wt.%Cr alloy. Materials Science and Engineering A.
342, 2003, s. 270-278.
-
Huttunen-Saarivirta, E.
Microstructural study on the inhibition of immersion tin coating formation by the substrate surface contamination. Surface and Coatings Technology.
165, 2003, 1, s. 101-106.
-
Huttunen-Saarivirta, E., Turunen, E. & Kallio, M.
Microstructural characterisation of thermally sprayed quasicrystalline Al-Co-Fe-Cr coatings. Journal of Alloys and Compounds.
354, 2003, 1-2, s. 269-280.
-
Lindgren, M. & Lepistö, T.
Application of Barkhausen noise to biaxial residual stress measurements in welded steel tubes. Materials Science and Technology.
18, 2003, 11, s. 1369-1376.
-
Lindgren, M. & Lepistö, T.
Relation between residual stress and Barkhausen noise in a duplex steel. NDT&E International.
36, 2003, s. 279-288.
-
Mikkola, P., Levänen, E., Rosenholm, J.B. & Mäntylä, T.
Colloidal processing of aluminum oxide powder for membrane applications. Ceramics International.
29, 2003, Elsevier Science Ltd and Techna. s. 393-401.
-
Saikko, V., Calonius, O. & Keränen, J.
Effect of Extent of Motion and Type of Load on the Wear of Polyethylene in a Biaxial Hip Simular. Journal of Biomedical Materials Research, Part B: Applied Biomaterials.
65B, 2003, Wiley Periodicals Inc.. s. 186-192.
-
Tuominen, J., Vuoristo, P., Mäntylä, T., Latokartano, J., Vihinen, J. & Andersson, P.H.
Microstructure and corrosion behvior of high power diode laser deposited Inconel 625 coatings. Journal of Laser Applications.
15, 2003, 1, Laser Institute of America. s. 55-61.
-
Uusitalo, M., Vuoristo, P. & Mäntylä, T.
High temperature corrosion of coatings and boiler steels in oxidizing chlorine-containing atmosphere. Materials Science and Engineering A.
A346, 2003, Elsevier Science B.V.. s. 168-177.
-
Vippola, M., Vuoristo, P., Lepistö, T. & Mäntylä, T.
AEM study of aluminum phosphate sealed plasma sprayed Al2O3 and Cr2O3 coatings. Journal of Materials Science Letters.
22, 2003, Kluwer Academic Publishers. s. 463-466.
Refereed Conference or Book Articles int'l
2011
-
Aho, Johanna; Moberg, Lauri; Syrjälä, Seppo; Järvelä, Pentti.
Injection molding machine with height-adjustable slit die for rheological measurements of polymer melts under processing conditions. 20th Nordic Rheology Conference 2011 June 8-10, 2011, Helsinki, Finland. Annual Transactions of the Nordic Rheology Society
19, 2011, Göteborg. Nordic Rheology Society. 125-133.
-
Ahola, Niina; Kellomäki, Minna; Heikkilä, Pirjo.
Fibres for Controlled Drug Delivery by Electrospinning. In: Talvenmaa, Päivi (ed.). Proceedings of FiberMed11 International Conference on Fibrous Products in Medical and Health Care, 28-30 June 2011, Tampere, Finland
2011, Tampere. International Conference on Fibrous Products in Medical and Health Care. 1-7.
-
Bolelli, G.; Bonferroni, B.; Lusvarghi, L.; Milanti, A.; Niemi, Kari; Laurila, Jussi; Vuoristo, Petri.
Characterisation of HVOF-sprayed Fe-based alloy coatings. ITSC 2011, International Thermal Spray Conference & Exposition, September 27 - 29, 2011, Hamburg. DVS-Berichte
276, 2011, Dusseldorf. DVS Media GmbH. 1-6.
-
Guo, L.; Berglin, L.; Li, Y.J.; Mattila, Heikki; Kalantar Mehrjerdi, A.; Skrifvars, M.
Disappearing sensor-textile based sensor for monitoring breathing. 2011 International Conference on Control, Automation and Systems Engineering, CASE 2011; Singapore; 30.-31.7.2011
2011, 5997723.Piscataway, NJ. IEEE. 1-4. http://dx.doi.org/10.1109/ICCASE.2011.5997723.
-
Hakala, Tomi; Harlin, Ali.
Mechanical Weathering of Pa6 Staple Fibres in Paper Machine Felts. In: Reichert, Thomas (ed.). 5th European Weathering Symposium, Natural and Artificial Ageing of Polymers Lisbon, Portugal, September 21 - 23, 2011. Publication
2011, 15, Lisbon. Confederation of European Environmental Engineering Societies CEEES. 101-108.
-
Hakala, Tomi; Holma, Sini; Harlin, Ali.
Study of Structural Combinations of Air-Laid Materials. In: Talvenmaa, Päivi (ed.). Proceedings of FiberMed11 International Conference on Fibrous Products in Medical and Health Care, 28-30 June 2011, Tampere, Finland
2011, Tampere. International Conference on Fibrous Products in Medical and Health Care. 1-5.
-
Heino, Vuokko; Kivikytö-Reponen, Päivi; Vippola, Minnamari; Kuokkala, Veli-Tapani.
Wear Reducing Effect of Embedded Quartz Abrasives in the Crushing-Pin-On-Disc Test Method. International Tribology Conference, Hiroshima 2011, ITC, October 30 - November 3, 2011, Hiroshima, Japan
2011, D1-05.Hiroshima. Japanese Society of Tribologists. 1-1.
-
Jönkkäri, Ilari; Syrjälä, Seppo.
Transient rheology of a magnetorheological fluid under shearing. 20th Nordic Rheology Conference 2011 June 8-10, 2011, Helsinki, Finland. Annual Transactions of the Nordic Rheology Society
19, 2011, Göteborg. Nordic Rheology Society. 263-267.
-
Koivuluoto, Heli; Kylmälahti, Mikko; Vuoristo, Petri.
Properties of low-pressure cold-sprayed coatings for repairing of casting defects. ITSC 2011, International Thermal Spray Conference & Exposition, September 27 - 29, 2011, Hamburg. DVS-Berichte
276, 2011, Dusseldorf. DVS Media GmbH. 1-6.
-
Laukkanen, Anssi; Andersson, Tom; Elers, Lauri; Helle, Aino; Holmberg, Kenneth; Kuokkala, Veli-Tapani; Apostol, Marian.
FEM Modelling Based Visualisation and Simulation of Impact Wear Events in Elastomeric Materials. International Tribology Conference, Hiroshima 2011, ITC, October 30 - November 3, 2011, Hiroshima, Japan
2011, C3-05.Hiroshima. Japanese Society of Tribologists. 1-1.
-
Laurila, Jussi; Niemi, Kari; Vuoristo, Petri; Vajala, J.
Corrosion and wear resistance of molybdenum containing arc spray composite coatings. ITSC 2011, International Thermal Spray Conference & Exposition, September 27 - 29, 2011, Hamburg. DVS-Berichte
276, 2011, Dusseldorf. DVS Media GmbH. 1-6.
-
Niemi, Kari; Hakalahti, Johanna; Hyvärinen, Leo; Laurila, Jussi; Vuoristo, Petri; Berger, L.-M.; Toma, F.-L.; Shakhverdova, I.
Influence of chromia alloying on the characteristics of APS and HVOF sprayed alumina coatings. ITSC 2011, International Thermal Spray Conference & Exposition, September 27 - 29, 2011, Hamburg. DVS-Berichte
276, 2011, Dusseldorf. DVS Media GmbH. 1-6.
-
Nousiainen, Pertti; Vehviläinen, Marianna; Rissanen, Marja.
Enzymatic Modification of Pulp Cellulsoe to Regenerated Fibers and Films via Aqueous Alkaline Solutions. Proceedings of 7th International Conference on Polymer and Textile Biotechnology. Final Workshop of COST Action 868. March 2-4, 2011, Milan, Italy
2011, Milan. INTB series of Conferences. 1-1.
-
Peltonen, Claudia; Varheenmaa, Minna; Meinander, Harriet.
Comfort Properties in Multifunctional Protective Clothing. In: Talvenmaa, Päivi (ed.). Proceedings of FiberMed11 International Conference on Fibrous Products in Medical and Health Care, 28-30 June 2011, Tampere, Finland
2011, Tampere. International Conference on Fibrous Products in Medical and Health Care. 1-12.
-
Puranen, Jouni; Hyvärinen, Leo; Lagerbom, Juha; Kylmälahti, Mikko; Koivuluoto, Heli; Vuoristo, Petri.
Manganese-cobolt spinel coatings for SOFC metallic interconnects manufactured by conventional plasma spraying (PS) and suspension plasma spraying (SPS). Proceedings of the ASME 2011 9th Fuel Cell Science, Engineering and Technology Conference, FuelCell2011, August 7-10. 2011, Washington, DC, USA
2011, New York, NY. ASME. 1-8.
-
Puranen, Jouni; Hyvärinen, Leo; Lagerbom, Juha; Kylmälahti, Mikko; Koivuluoto, Heli; Vuoristo, Petri.
Suspension plasma spraying (SPS) of manganese-cobolt spinel coatings. ITSC 2011, International Thermal Spray Conference & Exposition, September 27 - 29, 2011, Hamburg. DVS-Berichte
276, 2011, Dusseldorf. DVS Media GmbH. 1-6.
-
Ratia, Vilma; Heino, Vuokko; Valtonen, Kati; Kemppainen, A.; Siitonen, P.; Vippola, Minnamari; Kuokkala, Veli-Tapani.
Effect of Abrasive Properties on the Crushing Pin-On-Disc Wear Test Results. In: Franek F.; Bartz W.J.; Pauschitz A.; Vizintin J.; Ciulli E.; Crockett R. (ed.). ECOTRIB 2011, 3rd European Conference on Tribology and Viennano´11, 4th Vienna International Conference on Nano-Technology, Wien, Austria, June 7 - 9, 2011
2, 2011, Wien. ECOTRIB 2011. 569-574.
-
Ratia, Vilma; Valtonen, Kati; Kemppainen, Anu; Vippola, Minnamari; Kuokkala, Veli-Tapani.
High-Stress Abrasion and Impact-Abrasion Testing of Wear Resistant Steels. International Tribology Conference, Hiroshima 2011, ITC, October 30 - November 3, 2011, Hiroshima, Japan
2011, D1-08.Hiroshima. Japanese Society of Tribologists. 1-1.
-
Rissanen, Marja; Puolakka, Arja; Nousiainen, Pertti.
Wet Spinning of Polylactic Acid Sterreo Copolymers. In: Talvenmaa, Päivi (ed.). Proceedings of FiberMed11 International Conference on Fibrous Products in Medical and Health Care, 28-30 June 2011, Tampere, Finland
2011, Tampere. International Conference on Fibrous Products in Medical and Health Care. 1-6.
-
Rissanen, Marja; Syrjälä, Seppo; Vehviläinen, Marianna; Nousiainen, Pertti.
Solubility and Solution Rheology of Enzymatically Treated Pulp. In: Sjöqvist, M. (ed.). Annual Transactions the Nordic Rheology Society
19, 2011, Göteborg. Nordic Rheology Society. 303-307.
-
Varheenmaa, Minna; Peltonen, Claudia; Meinander, Harriet.
Integration of Multifunctionality and Comfort in Personal Protecctive Clothing for Extreme Conditions. In: Talvenmaa, Päivi (ed.). Proceedings of FiberMed11 International Conference on Fibrous Products in Medical and Health Care, 28-30 June 2011, Tampere, Finland
2011, Tampere. International Conference on Fibrous Products in Medical and Health Care. 1-6.
-
Vehkaoja, Antti; Verho, Jarmo; Cömert, Alper; Honkala, Markku; Lekkala, Jukka.
Wearable system for EKG monitoring - evaluation of night-time performance. MobiHealth, Wireless Mobile Communication and healthcare, Kos Island, Greece, 5-7 October, 2011
2011, Kos. ICST Conference on Wireless Mobile Communication and Healthcare. 1-8.
Refereed Conference or Book Articles int'l
2010
-
Ghabchi, Arash; Helle, Aino; Rombouts, Marleen; Holmberg, Kenneth; Rissa, Kati; Varis, Tommi; Lepistö, Toivo.
Cracking behaviour of thick composite coatings under scratch testing. 14th Nordic Symposium on Tribology, Nordtrib 2010, Storforsen, Sweden, Luleå University of Technology
2010, 1-8.
-
Heikkilä, P.; Wikström, L.; Pasanen, A.T.; Kauranen, P.; Harlin, Ali.
Sub-micron carbon fibres prepared from electrospun precursors. AUTEX 2010 World Textile Conference 21-23 June 2010 Vilnius, Lithuania
2010, 1-4.
-
Heikkilä, Pirjo; Laine, Jarkko; Hattula, Sanna; Aromaa, Mikko; Mäkelä, Jyrki M.; Pasanen, A.T.; Keskinen, Jorma Wikström, L.; Kauranen, P.; Harlin, Ali.
Submicron catalyst carbon fibres by electrospinning. The Textile Institute Centenary Conference Textiles: A Global Vision, 3-4 November 2010, Manchester, Uk
2010, 1-7.
-
Heino, Vuokko; Kaipiainen, Mikko; Siitonen, Pekka; Ratia, Vilma; Rissa, Kati; Lepistö, Toivo; Kuokkala, Veli-Tapani.
Compressive crushing of granite with wear-resistant materials. 14th Nordic Symposium on Tribology, Nordtrib 2010, Storforsen, Sweden, Luleå University of Technology
2010,
-
Juoksukangas, Janne; Lehtovaara, Arto; Miettinen, Juha; Tolvanen, Petra; Järvelä, Pentti; Niemi, Anna-Mari.
Development of a test rig for reciprocating seals in heavy load conditions. 14th Nordic Symposium on Tribology, Nordtrib 2010, Storforsen, Sweden, Luleå University of Technology
2010, 1-8.
-
Mattila, Heikki.
Current challenges in smart textile research. 4th international Technical Textiles Congress, 16-18 May 2010, Istanbul/Turkey
2010, 1-10.
-
Nousiainen, Pertti; Vehviläinen, Marianna.
Novel approach of biorefinery for wood-based cellulose fibres and polymer products. AUTEX 2010 World Textile Conference 21-23 June 2010 Vilnius, Lithuania
2010, 1-13.
-
Pal, Rudrajeet; Torstensson, Håkan.
Achieving success/survival in the global textile complex through organizational resilience. The Textile Institute Centenary Conference Textiles: A Global Vision, 3-4 November 2010, Manchester, UK
2010, 1-16.
-
Rissanen, Marja; Puolakka, Arja; Mariani, Christine; Deichmann, T.; Nousiainen, Pertti.
Fibrous scaffolds for cardiovascular tissue engineering made from solution-spun P(L/DL)LA 70/30. 23rd European Conference on Biomaterials, Tampere, Finland, September 11-15, 2010
2010, 1-1.
-
Spotz, Zdenek; Leemet, Tonu; Rokicki, Pawel; Fusova, Lenka; Saksl, Karel; Kuokkala, Veli-Tapani; Siemers, Carsten.
Influence of deformation on the microstructure of Ti-15V-3Al-3Cr-3Sn alloy. Proceedings of the 19th International Conference on Metallurgy and Materials, Roznov pod Radhostem, Czech Republic, May 18th - 20th 2010
2010, 1-6.
-
Terva, Juuso; Kuokkala, Veli-Tapani; Kivikytö-Reponen, Päivi.
Multiple pass scratch testing with natural rock indenter. 14th Nordic Symposium on Tribology, Nordtrib 2010, Storforsen, Sweden, Luleå University of Technology
2010, 1-8.
Refereed Conference or Book Articles int'l
2009
-
Aromaa, M., Nikkanen, J-P., Wagner, J.B., Levänen, E., Mäntylä, T. & Mäkelä, J.M.
Syntheses of zirconia-alumina core-shell nanoparticles by liquid flame spray. EAC European Aerosol Conference 2009, September 6-11, 2009, Karlsruhe, Germany.
2009, 1 p.
-
Aydogan, B., Hannula, M., Moritz, N., Levänen, E. & Hyttinen, J.
Analysis of multible resolution u-CT image sets for pore-size distribution estimation. In: Dössel, O. & Schlegel, W.C. (eds.). World Congress on Medical Physics and Biomedical Engineering WC 2009, 7.-12.9.2009, München, Germany. IFMBE Proceedings.
25, 2009, pp. 1261-1264.
-
Curtze, S., Kuokkala, V.-T., Hokka, M. & Saarinen, T.
Microstucture and texture evolution in high manganese TWIP steels. DYMAT 2009, 9th International Conference on the Mechanical and Physical Behaviour of Materials under Dynamic Loading, September 7-11, 2009, Brussels, Belgium.
2009, pp. 1007-1013. http://dx.doi.org/10.1051/dymat/2009141.
-
Hakala, T. & Harlin, A.
A laboratory set-up for the out-of-plane shear strength measurement of paper machine clothing. In: Kadoglu, H. et al. (eds.). AUTEX 2009 Proceedings of the 9th Autex Conference, Izmir, Turkey, May 26-28, 2009.
2009, pp. 1366-1369.
-
Hakala, T. & Harlin, A.
Anomalies in the crystallinity of PA 6 in weathering under simulated paper machine conditions. In: Reichert, RT. (ed.). Natural and Artficial Ageing of Polymers, 4th European Wathering Symposium, Publication.
11, 2009, pp. 327-334.
-
Hakala, T. & Harlin, A.
Test results of the out-of-plane shear strength measurement of paper machine clothing. In: Kadoglu, H. et al. (eds.). AUTEX 2009 Proceedings of the 9th Autex Conference, Izmir, Turkey, May 26-28, 2009.
2009, pp. 1370-1373.
-
Heikkilä, P. & Harlin, A.
Nanofibre filters in aerosol filtration. Peretz, D.H. (ed.). Aerosols: Chemistry, Environmental Impact and Health Effects.
2009, New York. Nova Science Publihers. pp. 69-89.
-
Heikkilä, P., Wikström, L., Pasanen, A., Kauranen, P. & Harlin, A.
Preparation of electrospun PAN/CNT compsite fibres. ICCM17 Edinburgh 17th international Conference on Composite Materials 17 Jul 2009 - 31 Jul 2009, Edinburgh, UK.
2009, 7 p.
-
Isakov, M., Kuokkala, V.-T. & Ruoppa, R.
Instantaneous strain rate sensitivity of metastable austenitic stainless steel. DYMAT 2009, 9th International Conference on the Mechanical and Physical Behaviour of Materials under Dynamic Loading, September 7-11, 2009, Brussels, Belgium.
1/2, 2009, pp. 1449-1455. http://dx.doi.org/10.1051/dymat/2009205.
-
Kokkonen, J., Kuokkala, V.-T. & Isakov, M.
Dynamic behavior of UFG aluminum at a wide range of strain rates and temperatures in compression and tension. DYMAT 2009, 9th International Conference on the Mechanical and Physical Behaviour of Materials under Dynamic Loading, September 7-11, 2009, Brussels, Belgium.
1/2, 2009, pp. 647-653. http://dx.doi.org/10.1051/dymat/2009092.
-
Lilja, J., Sillanpää, H., Mäkinen, R., Palukuru, V., Östman, K., Hagberg, J., Kanerva, T., Jantunen, H., Lepistö, T. & Mansikkamäki, P.
Wide-band characterization of printable electronics materials: The effect of conductor loss and internal inductance on relative permittivity. EuCAP 2009. 3rd European Conference on Antennas and Propagation, 23-17 March 2009, Berlin, Germany.
2009, pp. 3869-3873.
-
Mäkinen, R., Sillanpää, H., Östman, K, Palukuru, V., Pynttäri, V., Kanerva, T., Hagberg, J., Lepistö, T. & Jantunen, H.
Application of Jacobi-Davidson algorithm to 2-D eigenmode problems in printable electronics. ICEAA '09. International Conference on Electromagnetics in Advanced Applications, September 14-18, 2009, Torino, Italy.
2009, pp. 122-125.
-
Mäkinen, Riku; Sillanpää, Hannu; Östman, Kauko; Palukuru, Vamsi; Pynttäri, Vesa; Kanerva, Tomi; Hagberg, Juha; Lepistö, Toivo; Jantunen, Heli; Yang, Moshi; Laxton, Peter B.; Arimura, Hidetoshi; Rönkkä, Risto.
Wide-band electrical characterization of printable nano-particle copper conductors. APMC 2009. Asia-Pacific Microwave Conference 2009, December 7-10, 2009, Singapore
2009, 2455-2458. http://dx.doi.org/10.1109/APMC.2009.5385482.
-
Meinander, H.
Smart textile solutions for protection and health care. 48th Dornbirn Man-Made Fibers Congress, Austria 16-18 September 2009.
2009, 4 p.
-
Nousiainen, P. & Vehviläinen, M..
Biocelsol - Biotechnological process for manufacturing cellulosic products with added value. 48th Dornbirn Man-Made Fibers Congress, Austria 16-18 September 2009.
2009, 11 p.
-
Rissanen, M., Puolakka, A., Mariani, C., Deichmann, T., Schmidt, D. & Nousiainen, P.
Composite scaffolds for cardiovascular tissue engigeering made from solution spun polylactide. In: Kadoglu, H. et al. (eds.). AUTEX 2009 Proceedings of the 9th Autex Conference, Izmir, Turkey, May 26-28, 2009.
2009, pp. 188-193.
-
Sillanpää, H., Lilja, J., Mäkinen, R., Östman, K., Palukuru, V., Virtanen, J., Pynttäri, V., Kanerva, T., Hagberg, J., Lepistö, T., Jantunen, H. & Mansikkamäki, P.
Application of wide-band material parameter extraction techniques to printable electronics characterization. ECTC 2009, 59th Electronic Components & Technology Conference, May 26-29, 2009, San Diego, USA.
2009, pp. 1342-1348. http://dx.doi.org/10.1109/ECTC.2009.5074187.
-
Sillanpää, H., Pynttäri, V. Palukuru, V., Östman, K., Hagberg, J., Kanerva, T., Jantunen, H., Lepistö, T., Mäntysalo, M. & Mäkinen, R.
Design and modeling approach for critical RF parts in printable electronics applications. IMAPS Advanced Technology Workshop and Tabletop Exhibition on Printed Devices and Applications, Orlando, Florida, USA, February 25-27. 2009.
2009, 4 p.
-
Syrjälä, S.
Continuous equipment simulation - single screw. In: Manas-Zloczower, I. (ed.). Mixing and compounding of polymers: Theory and Practice.
2nd ed., 2009, pp. 363-388.
-
Talvenmaa, P., Uotila, M., Louhevaara, V., Rytilahti, P. & Pitkänen, M.
Sustainable innovative materials in high tech applications to promote health and wellbeing. Proceedings of the 17th World Congress of the International Ergonomics Association IEA 2009, August 9-14, 2009, Beijing, China.
2009, 6 p.
-
Vehviläinen, M., Kamppuri, T., Nousiainen, P., Kallioinen, A., Siika-aho, M., Christoffersson, K., Rom, M. & Janicki, J.
Effect of acid and enzymatic treatments of TCF dissolving pulp on the properties of wet spun cellulosic fibres. In: Kuokka-Ihalainen, A. (ed.). NWBC-2009 The 2nd Nordic Wood Biorefinery Conference, Helsinki, Finland, September 2-4, 2009.
2009, pp. 203-207.
-
Zhang, Xiaoxue; Nikkanen, Juha-Pekka; Kanerva, Tomi; Levänen, Erkki; Mäntylä, Tapio.
Comparative study of iron oxide doped alumina-based catalysts via sol-gel technique and liquid flame spray (LFS) method on the growth of carbon nanotubes (CNTs) by decomposition of methane. In: Bucko M.M; Haberko K.; Pedzich Z.; Zych L. (ed.). Proceedings of 11th International Conference and Exhibition of the European Ceramic Society ECERS, Krakow, Poland, 21-25.6.2009
2009, 651-654.
Refereed Conference or Book Articles int'l
2008
-
Cömert, A., Honkala, M., Aydogan, B., Vehkaoja, A., Verho, J. & Hyttinen, J.
Comparison of different structrures of silver yarn electrodes for mobile monitoring. In: Vander Sloten, J. et al. (eds.). 4th European Conference of the International Federation for Medical and Biological Engineering, 23-27 November 2008, Antwerp, Belgium. IFMBE Proceedings.
2008, pp. 1204-1207. http://dx.doi.org/10.1007/978-3-540-89208-3_288.
-
Cömert, A., Honkala, M., Puurtinen, M. & Perhonen, M.
The suitability of silver yarn electrodes for mobile EKG monitoring. In: Katashev, A., Dekhtyar, Y. & Spigulis, J. (eds.) Proceedings of the 14th Nordic-Baltic Conference on Biomedical Engineering and Medical Physics, Riga, Latvia, 16.-20.06.2008.
20, 2008, Berlin Heidelberg. Springer-Verlag. pp. 198-201.
-
Curtze, S., Kuokkala, V.-T., Hokka, M., Peura, P. & Verleysen, P.
Effects of composition, temperature and strain rate on the mechanical behavior of high-alloyed manganese steels. New Developments on Metallurgy and Applications of High Strength Steels, International Conference, May 26-28, Buenos Aires, Argentina.
2008, 11 p.
-
Heikkilä, P. & Harlin, A.
Electrospun nanofibres containing carbon nanotubes. AUTEX 2008 Proceedings of the 8th Autex Conference, June 24-26, 2008, Biela, Italy.
2008, 6 p.
-
Heikkilä, P., Väänänen, R., Tuominen, M., Kuusipalo, J. & Harlin, A.
Penetration of plasma into porous structure of nonwoven fabric. AUTEX 2008 Proceedings of the 8th Autex Conference, June 24-26, 2008, Biela, Italy.
2008, 8 p.
-
Huttunen-Saarivirta, E., Kalidakis, S., Stott, F.H., Perez, F.J. & Lepistö, T.
High-temperature erosion-oxidation of uncoated and FB-CVD aluminized and aluminized-siliconized 9CR-1MO steel under fluidized-bed conditions. In: Kleemola, J. & Lehtovaara, A. (eds.). Proceedings of Nordtrib 2008, 13th Nordic Symposium on Tribology, 10-13 June, 2008, Tampere, Finland.
2008, 33 p.
-
Huttunen-Saarivirta, E., Kalidakis, S., Stott, F.H., Rohr, V. & Schutze, M.
The erosion-corrosion resistance of uncoated and aluminized 12% chromium ferritic steels under fluidized-bed conditions at elevated temperature (SUNASPO). In: Schutze, M. et al. (eds.). Novel approaches to improving high temperature corrosion resistance, European Federation of Corrosion Publications.
47, 2008, Chapter 12, pp. 210-235.
-
Jouppila, V., Nurminen, N., Berg, T. & Ellman, A.
Improving the quality of filament winding process with novel techniques. 7th International Conference on Smart Systems, Smart Systems 2008, June 4-5, 2008, Seinäjoki, Finland.
2008, 11 p.
-
Kuokkala, V.-T., Kokkonen, J., Song, B., Chen, W., Olejnik, L. & Rosochowski, A.
Dynamic response of severe plastic deformation processed 1070 aluminium at various temperatures. In: Couque, H. et al. (eds.). 18th DYMAT Technical Meeting, the Behaviour of Bulk Nanomaterials and Metallic Glasses under Dynamic Loading, September 10-12, 2008, Bourges, France.
2008, pp. 39-46.
-
Meinander, H., Pedersen, R., Faerevik, H., Hansen, J., Strazdiene, E., Vanhala, J. & Shishoo, R.
Networking Nordic intelligent textile know how (NEST II). Ambience 08 International Scientific Conference Proceedings 2008, Smart Textiles - Technology and Design, 2-3 June 2008, Borås, Sweden.
2008, p. 213.
-
Meinander, H., Salonen, R. & Puolakka, A.
Quality of leisure wear - case: rainwear for boating. AUTEX 2008 Proceedings of the 8th Autex Conference, June 24-26, 2008, Biela, Italy.
2008, 5 p.
-
Nikkola, L., Vapalahti, K., Harlin, A., Seppälä, J. & Ashammakhi, N.
Nanostructured diclofenac sodium releasing material. In: Paulino, G.H. et al. (eds.). Multiscale and Functionally Graded Materials, Proceedings of the International Conference FGM IX, Hawaii, 15-18 October 2006. AIP Conference Proceedings.
973, 2008, pp. 901-906.
-
Terva, J., Teeri, T., Kuokkala, V.-T., Siitonen, P. & Liimatainen, J.
Pin-on-disk studies of three-body abrasive wear behavior of steels. In: Kleemola, J. & Lehtovaara, A. (eds.). Proceedings of Nordtrib 2008, 13th Nordic Symposium on Tribology, 10-13 June, 2008, Tampere, Finland.
2008, 15 p.
-
Uotila, M., Rytilahti, P., Talvenmaa, P. & Louhevaara, V.
Sustainable innovative materials in high tech applications. Ambience 08 International Scientific Conference Proceedings 2008, Smart Textiles - Technology and Design, 2-3 June 2008, Borås, Sweden.
2008, pp. 171-174.
-
Zhang, X., Honkanen, M., Ge, Y., Hannula, S-P., Levänen, E. & Mäntylä, T.
Nanocrystalline γ-alumina and α-alumina from boehmite nanoflakes. In: Bellosi, A. & Babini, G.N. (eds.): 2nd International Congress on Ceramics, Global Roadmap for Ceramics, ICC2 Proceedings, June 29 - July 4, 2008, Verona, Italy.
2008, 6 p.
Refereed Conference or Book Articles int'l
2007
-
Alam, P., Toivakka, M., Hämäläinen, H. & Syrjälä, S.
The elastic modulus of paper coating in tension and compression. Tappi Coating & Graphic Arts Conference, Miami, Florida, April 22-25, 2007.
2007, 12 p.
-
Amberla, T., Rekow, M., Köngäs, J., Asonen, H., Salminen, T., Viitanen, N., Kulmala, M., Vuoristo, P., Pessa, M. & Lappalainen, R.
Pulsed laser deposition with a high average power fiber laser. 49th Annual Technical Conference Proceedings 2006, Society of Vacuum Coaters SVC, April 22-27, 2006, Washington, D.C. USA.
2007, pp. 79-82.
-
Fabrin, P., Hoikkanen, M & Vuorinen, J.
Injection molding of thermoplastic elastomer on etched aluminum: Taguchi optimization. Antec 2007, Annual Technical Conference, Proceedings, Cincinnati, Ohio, USA, 6-11 May, 2007.
2007, pp. 2528-2532.
-
Heikkilä, A., Tanskanen, A., Kärhä, P. & Syrjälä, S.
Quantification of material exposure to ultraviolet radiation. 3rd European Weathering Symposium EWS, Krakow, Poland, September 12-14, 2007.
2007, 10 p.
-
Keskinen, H., Mäkelä, J.M., Aromaa, M., Keskinen, J., Levänen, E. & Mäntylä, T.
In-flame deposits of Liquid Flame Spray generated silver, titania and silver-titania nanoparticles. In: Peukert, W. (ed.). Proceedings of Partec 2007, International Congress on Particle Technology, 27.-29.3.2007 Nuremberg, Germany.
2007, 3 p.
-
Kettunen, P., Uunonen, M., Vuoristo, T. & Kaasalainen, T.
Comparison of the rapid methods to determine creep rates for desingning of wood constructions. Recent Research Developments in Materials Science.
7, 2007, pp. 41-52.
-
Mäkinen, H., Lagerbom, J. & Vuoristo, P.
Adhesion of cold sprayed coatings: effect of powder, substrate, and heat treatment. In: Marple, B. et al. (eds.). Proceedings of the 2007 International Thermal Spray Conference Global Coating Solutions, May 14-16, 2007, Beijing, China.
2007, pp. 31-36.
-
Mäkinen, J.T., Keränen, K., Hakkarainen, J., Silvennoinen, M., Salmi, T., Syrjälä, S., Ojapalo, A., Schorpp, M., Hoskio, P. & Karioja, P.
Inmould integration of a microscope add-on system to a 1.3 Mpix camera phone. In: Baldini, F. et al. (eds.). Optical Sensing Technology and Applications Conference, Prague, Czech Republic, April 16-19, 2007. SPIE Proceedings.
6585, 2007, 658507, 10 p. http://dx.doi.org/10.1117/12.722741.
-
Maury, A., De Belie, N., Demeestere, K. & Mäntylä, T.
Titanium dioxide containing cementitious materials: characterization and air cleaning potential. In: Baglioni, P. & Cassar, L. (eds.). Photocatalysis, Environment and Construction Materials TDP 2007, International RILEM Symposium, Florence, Italy, 8-9 October 2007.
2007, pp. 227-234.
-
Nurminen, J., Riihimäki, J., Näkki, J. & Vuoristo, P.
Hot-wire cladding process studies. 26th International Congress on Applications of Lasers & Electro-optics, ICALEO, 29.10.-1.11.2007, Orlando, USA.
2007, pp. 947-952.
-
Syrjälä, S. & Aho, J.
Evaluation of the effect of viscous heating in capillary rheometry of polymer melts. In: Aho, J. (ed.). The Nordic Rheology Conference, Stavanger, Norway, June 13-15, 2007. Annual Transactions, the Nordic Rheology Society.
15, 2007, pp. 99-103.
-
Tuominen, J. & Vuoristo, P.
Induction heating unit equipped with closed-loop pid controller; versatile tool in laser cladding. 26th International Congress on Applications of Lasers & Electro-optics, ICALEO, 29.10.-1.11.2007, Orlando, USA.
2007, pp. 1097-1104.
Refereed Conference or Book Articles int'l
2006
-
Kanerva, U., Kosme, K., Lagerbom, J. & Vuoristo, P.
Properties of WC-10Co-4Cr powders and coatings made of recycled hard metal. In: Marple, B.R. et al. (eds.). Proceedings of the 2006 International Thermal Spray Conference, ITSC2006, 15-18 May Seattle, Washington, USA.
2006, 5 p.
-
Mäkinen, H., Lagerbom, J. & Vuoristo, P.
Mechanical properties and corrosion resistance of cold sprayed coatings. In: Marple, B.R. et al. (eds.). Proceedings of the 2006 International Thermal Spray Conference, ITSC2006, 15-18 May Seattle, Washington, USA.
2006, 6 p.
-
Nikkilä, A-P., Pastila, P. & Mäntylä, T.
Durability of SiC-based hot gas filters. In: Bucko, M.M. et al. (eds.): Proceedings of ECerS Topical Meeting, Krakow, Poland, 17-20 September 2006. Ceramics, Polish Ceramic Bulletin.
97, 2006, pp. 299-306.
-
Rissa, K.
Electron microscopy for pigment coatings. In: Kärkkäinen, S. (ed.), PaPSaT, International Doctoral Programme in Pulp and Paper Science and Technology in Finland, Yearbook 2006.
2006, pp. 67-71.
-
Suutala, J., Tuominen, J. & Vuoristo, P.
Manufacturing of corrosion resistant coatings using laser assisted thermal spraying. In: Marple, B.R. et al. (eds.). Proceedings of the 2006 International Thermal Spray Conference, ITSC2006, 15-18 May Seattle, Washington, USA.
2006, 6 p.
-
Tuominen, J., Latokartano, J., Vihinen, J., Vuoristo, P., Mäntylä, T., Naumann, T., Scharek, S., Berger, L.-M. & Nowotny, S.
Deposition of thick wear and corrosion resistant coatings by high power diode laser. In: Marple, B.R. et al. (eds.). Proceedings of the 2006 International Thermal Spray Conference, ITSC2006, 15-18 May Seattle, Washington, USA.
2006, 3 p.
-
Veräjänkorva, S., Lagerbom, J. & Vuoristo, P.
Influence of powder type and properties on ceramic layer deposition by cold spraying. In: Marple, B.R. et al. (eds.). Proceedings of the 2006 International Thermal Spray Conference, ITSC2006, 15-18 May Seattle, Washington, USA.
2006, 3 p.
Refereed Conference or Book Articles int'l
2005
-
Eronen, V., Ahmaniemi, S., Niemi, K. & Vuoristo, P.
Microwear in thermally sprayed hard coatings by different abrasives. International Thermal Spray Conference & Exposition ITSC 2005, Basel, Swizerland, May 2 - 4, 2005.
2005, 8 p.
-
Keskinen, E., Vuoristo, T., Kuokkala, V.-T. & Martikainen, M.
Viscoelastic wawe analysis of Hopkinson split bar system. Proceedings of IMECE2005, 2005 ASME International Mechanical Engineering Congress and Exposition, November 5-11, 2005, Orlando, Florida USA.
2005, 9 p.
-
Mäntylä, T. & Uusitalo, M.
Corrosion of thermal spray coatings at high temperatures. In: Cramer, S. & Covino, B. (eds). ASM Handbook, Corrosion: Materials.
13B, 2005, pp. 430-433.
-
Rämö, J., Vuoristo, T., Kuokkala, V.-T., Simbierowicz, G. & Vanninen, R.
Influence of rubber parameters on the calculation of nip pressure profile in paper coating. In: Austrell, P.-E. et al. (eds.). Proceedings of the 4th European Conference for constitutive models for rubber, ECCMR 2005, Stockholm, Sweden, 27-29 June 2005.
2005, pp. 415-420.
-
Rissa, K., Lepistö, T. & Yrjölä, K.
Effect of kaolin content on structure and functional properties of water-based coatings. Coatings Science International 2005, 28 June - 1 July 2005, The Netherlands.
2005, pp. 70-73.
Refereed Conference or Book Articles int'l
2004
-
Peltola, P.
Alternative fibre sources: Paper and wood fibres as reinforcemet. In: Bailie, C. (ed.). Green composites, Polymer composites and the environment.
2004, pp. 81-99.
-
Rissa, K.
Characterization and optimization of structure and barrier properties of water-based coatings. In: Kärkkäinen, S. (ed.). PaPSaT, International Doctoral Programme in Pulp and Paper Science and Technology in Finland, Yearbook 2003.
2004, pp. 91-95.
-
Rissa, K.
Characterization and optimization of structure and functional properties of water-based coatings. In: Kärkkäinen, S. (ed.). PaPSaT, International Doctoral Programme in Pulp and Paper Science and Technology in Finland, Yearbook 2004.
9, 2004, pp. 72-76.
-
Uusitalo, M., Backman, R., Berger, L.-M., Vuoristo, P. & Mäntylä, T.
Stability of Carbides in Chlorine-Containing High-Temperature Environments. In: Mandal, H. et al. (eds). Proceedings of the 8th Conference and Exhibition of the European Ceramic Society, Istanbul, Turkey, June 29-July 3, 2003.
2004, pp. 497-500.
-
Vuoristo, P., Laurila, J., Mäntylä, T., Niemi, K., Rekola, S. & Ahmaniemi, S.
Surface changes in thermally sprayed hard coatings by wear of different abrasives. ITSC 2004, International Thermal Spray Conference & Exposition, Thermal Spray Solutions, Advances in Technology and Application, Osaka, Japan, May 10-12, 2004.
2004, 6 p.
Refereed Conference or Book Articles int'l
2003
-
Ahmaniemi, S., Mäntylä, T. & Vuoristo, P.
Extreme Values of the Piston Engine (Advanced Thick Thermal Barrier Coatings). In: Hakalehto, K. & Mattila, M. (eds.). Final report of TUKEVA Research programme on future mechanical engineering 2000-2003.
2003, Tampere. Tampere Technology Centre Ltd. s. 45-53.
-
Ahmaniemi, S., Tuominen, J., Vippola, M., Vuoristo, P., Mäntylä, T., Cernuschi, F., Gualco, C., Bonadei, A. & Di Maggio, R.
Characterization of Modified Thick Thermal Barrier Coatings. In: Marple, B.R. & Moreau, C. (eds.). Thermal Spray 2003, Advancing the Science and Applying the Technology, Vol. 2, Proceedings of the 2003 International Thermal Spray Conference, 5-8 May, Orlando, Florida, USA.
2, 2003, ASM International. s. 1477-1486.
-
Dubsky, J., Chraska, P., Ahmaniemi, S., Vippola, M., Vuoristo, P. & Mäntylä, T.
Effect of Aluminum Phosphate Sealing on the Elastic Properties of Plasma Sprayed Ceramic Coatings. In: Marple, B.R. & Moreau, C. (eds.). Thermal Spray 2003, Advancing the Science and Applying the Technology, Vol. 1, Proceedings of the 2003 International Spray Conference, 5-8 May, Orlando, Florida, USA.
1, 2003, ASM International. S. 617-622.
-
Honkanen, M., Vippola, M. & Lepistö, T.
Recrystallization and annealing behaviour of oxygen free and silver bearing coppers. In: Jorgensen, S. & Gunnaes, A.E. (Eds.). Scandem 2003, Proceedings Book, 10-13 June 2003, Oslo, Norway.
2003, s. 75-76.
-
Huttunen-Saarivirta, E., Turunen, E. & Kallio, M.
Mircostructural study on the HVOF-sprayed quasicrystalline Al-Cu-Fe coatings. In: Jorgensen, S. & Gunnaes, A.E. (Eds.). Scandem 2003, Proceedings Book, 10-13 June 2003, Oslo, Norway.
2003, 77 s.
-
Männikkö, U., Määttä, A., Vuoristo, P. & Mäntylä, T.
Preparation and Characterization of Powders and Coatings Containing Solid Lubricants. In: Marple, B.R. & Moreau, C. (eds.). Thermal Spray 2003, Advancing the Science and Applying the Technology, Vol. 1, Proceedings of the 2003 International Spray Conference, 5-8 May, Orlando, Florida, USA.
1, 2003, ASM International. s. 243-248.
-
Mäntylä, T. & Vuoristo, P.
Corrosion Resistance of Thermal Sprayed Ceramic and Cermet Coatings in Aqueous Conditions. Les Premieres Rencontres Internationales sur la Projection Thermique, Lille, France, 4-5 December, 2003.
2003, s. 176-181.
-
Murtomaa, M., Kankaanpää, S., Nurmio, J., Leino, M., Mäkelä, J., Järvelä, P., Laine, E. & Lehto, V.-P.
Optimizing the process parameters of injection moulding to minimize the4 static charge of polypropylene test rod. Electrostatics Conference of the Institute of Physics, Edinburgh, March 23-27, 2003, International physics conference series.
178, 2003, pp. 83-88.
-
Neufuss, K., Kolman, B., Ctibor, P., Chraska, P., Laakso, J., Ahmaniemi, S., Vuoristo, P. & Mäntylä, T.
Highly Porous Deposits of Cr2O3 Prepared by Plasma Co-spraying of Cr2O3 and Al. In: Marple, B.R. & Moreau, C. (eds.). Thermal Spray 2003, Advancing the Science and Applying the Technology, Vol. 2, Proceedings of the 2003 International Spray Conference, 5-8 May, Orlando, Florida, USA.
2, 2003, ASM International. s. 1307-1310.
-
Neumann, T., Berger, L.-M., Ingwerth, M. & Vuoristo, P.
Titanum Suboxide Coatings Prepared by VPS Spraying. In: Marple, B.R. & Moreau, C. (eds.). Thermal Spray 2003, Advancing the Science and Applying the Technology, Vol. 2, Proceedings of the 2003 International Thermal Spray Conference, 5-8 May, Orlando, Florida, USA.
2, 2003, ASM International. s. 1441-1445.
-
Niemi, K., Rekola, S., Vuoristo, P., Laurila, J., Vippola, M. & Mäntylä, T.
Advanced Oxide Ceramic Coatings for Applications Demanding High Wear Resistance. In: Marple, B.R. & Moreau, C. (eds.). Thermal Spray 2003, Advancing the Science and Applying the Technology, Vol. 1, Proceedings of the 2003 International Spray Conference, 5-8 May, Orlando, Florida, USA.
1, 2003, ASM International. s. 233-236.
-
Pastila, P., Lara-Curzio, E., Nikkilä, A-P. & Mäntylä T.
Fracture Behavior of SiC-Based, Clay-Bonded Hot Gas Filters. In: Kriven, W.M. et al. (Eds.). 27th International Cocoa Beach Conference on Advanced Ceramics and Composites A, January 26-31, 2003, Cocoa Beach, Florida, Ceramic engineering and science proceedings.
24, 2003, 3, Yhdysvallat. The American Ceramic Society. s. 171-176.
-
Rissa, K. & Lepistö, T.
Dissolution of fibres exposes structure of coatings. In: Jorgensen, S. & Gunnaes, A.E. (Eds.). Scandem 2003, Proceedings Book, 10-13 June 2003, Oslo, Norway.
2003, s. 125-126.
-
Sundelin, J. & Lepistö, T.
Characterization of thermally aged immersion tin plated PCBs. In: Jorgensen, S. & Gunnaes, A.E. (Eds.). Scandem 2003, Proceedings Book, 10-13 June 2003, Oslo, Norway.
2003, s. 133-134.
-
Tricoire, A., Legros, E., Vardelle, A., Ahmaniemi, S., Vuoristo, P. & Mäntylä, T.
On-Line Monitoring Assisted Spray Process Optimization of Thermal Barrier Coatings. In: Marple, B.R. & Moreau, C. (eds.). Thermal Spray 2003, Advancing the Science and Applying the Technology, Vol. 2, Proceedings of the 2003 International Spray Conference, 5-8 May, Orlando, Florida, USA.
2, 2003, ASM International. s. 1213-1220.
-
Uusitalo, M., Vuoristo, P. & Mäntylä, T.
The Effect of Chlorine on Degradation Mechanisms of Thermal Sprayed Coatings at Elevated Temperatures. In: Marple, B.R. & Moreau, C. (eds.). Thermal Spray 2003, Advancing the Science and Applying the Technology, Vol. 1, Proceedings of the 2003 International Spray Conference, 5-8 May, Orlando, Florida, USA.
1, 2003, ASM International. s. 485-494.
-
Vippola, M., Honkanen, M., Polvinen, R., Lepistö, T. & Valden, M.
Effect of aging on the performance of alumina supported Pd exhaust catalysts. In: Jorgensen, S. & Gunnaes, A.E. (Eds.). Scandem 2003, Proceedings Book, 10-13 June 2003, Oslo, Norway.
2003, s. 149-150.
-
Vuoristo, P., Leivo, E., Turunen, E., Leino, M., Järvelä, P. & Mäntylä, T.
Evaluation of Thermally Sprayed and Other Polymeric Coatings for Use in Natural Gas Pipeline Components. In: Marple, B.R. & Moreau, C. (eds.). Thermal Spray 2003, Advancing the Science and Applying the Technology, Vol. 2, Proceedings of the 2003 International Thermal Spray Conference, 5-8 May, Orlando, Florida, USA.
2, 2003, ASM International. s. 1693-1702.
Non-Refereed Articles int'l
2011
-
Dierkes, W.K.; Tiwari, M.; Datta, R.N.; Talma, A.G.; Noordermeer, J.W.M.; Van Ooij, W.J.
Surface modification of silica for rubber compounds [Oberflächenmodifizierung von kieselsäure für kautschuk mischungen]. Gummi, Fasern, Kunststoffe.
64, 2011, 3, 153-161.
-
Hoikkanen, Maija; Honkanen, Mari; Vippola, Minnamari; Lepistö, Toivo; Vuorinen, Jyrki.
Enviromental durability of injection moulded thermoplastic urethane -metal hybrids. THEPLAC 2011, International Workshop on Thermoplastic Matrix Composites, June 23th-24th, 2011, Lecce, Italy
2011, Lecce. THEPLAC 2011. 1-9.
-
Hoikkanen, Maija; Honkanen, Mari; Vippola, Minnamari; Vuorinen, Jyrki; Lepistö, Toivo.
Effect of Silane Treatment on the Adhesion of TPE-Metal Adhesion in Injection Moulding. SAMPE Europe, 32nd International Technical Conference & Forum, March 28th - 29th 2011, Paris, France
2011, Paris. SAMPE Europe. 384-391.
-
Isakov, Matti; Jeremy, Seidt; Östman, Kauko; Gilat, Amos; Kuokkala, Veli-Tapani.
Characterization of a Ferritic Stainless Sheet Steel in Simple Shear and Uniaxial Tension at Different Stain Rates. ASME 2011 International Mechanical Engineering Congress and Exposition, IMECE2011, November 11-17, 2011, Denver, Colorado, USA
2011, New York, NY. ASME. 1-9.
-
Kokkonen, Jari; Hokka, Mikko; Kuokkala, Veli-Tapani.
Mechanical behavior of ultrafine-grained aluminum as a function of strain rate, temperature and loading mode. 20th DYMAT Technical Meeting Mechanical Behaviour of Nanomaterials, Metallic Glasses and Architecturally Designed Materials, September 7-9, 2011, Paris, France
2011, Paris. DYMAT. 53-59.
-
Kuokkala, Veli-Tapani; Curtze, Sven; Isakov, Matti; Hokka, Mikko.
Dynamic Thermo-Mechanical Response of Austenite Containing Steels. In: Proulx, Tom (ed.). Dynamic Behavior of Materials, Proceedings of the 2011 Annual Conference on Experimental and Applied Mechanics. Conference Proceedings of the Society for Experimental Mechanics Series
99, 2011, 1, New York. Springer. 337-342. http://dx.doi.org/10.1007/978-1-4614-0216-9_47.
-
Mubarok, F.; Puranen, Jouni; Vuoristo, Petri; Johnsen, R.; Espallargas, N.
Effect of suspension characteristics on microstructure of suspension plasma sprayed SiC submicron coatings. ITSC 2011, International Thermal Spray Conference & Exposition, September 27 - 29, 2011, Hamburg. DVS-Berichte
276, 2011, Dusseldorf. DVS Media GmbH. 1-6.
-
Nevalainen, Katja; Isomäki, Nora; Honkanen, Mari; Suihkonen, Reija; Vuorinen, Jyrki.
Nanocomposites via Melt-Compounded ALD-coated Powder. SAMPE Europe, 32nd International Technical Conference & Forum, March 28th - 29th 2011, Paris, France
2011, Paris. SAMPE Europe. 417-424.
-
Nousiainen, Pertti; Vehviläinen, Marianna; Rissanen, Marja.
Enzymatic modification of pulp cellulose to regenerated fibers and films via aqueous alkaline solutiions. In: Nousiainen, Pertti; Vehviläinen, Marianna; Rissanen, Marja (ed.). The Third Nordic Wood Biorefinery Conference NWBC 2011, 22-24 March, 2011, Stockholm, Sweden
2011, Stockholm. NWBC. 1-2.
-
Poikelispää, Minna; Das, Amit; Dierkes, Wilma; Vuorinen, Jyrki.
Reinforcement effect of plasma modified halloysite nanotubes in a carbon black filled natural rubber-butadiene rubber matrix. Rubber Expo & Advanced Materials in Health Care 180th Technical Meeting & Educational Symposium 11-13 October 2011, Cleveland, USA
2011, Cleveland, OH. American Chemical Society ACS. 1-15.
-
Ruoranen, Johanna; Tiainen, Tuomo.
Strength of epoxy adhesive aluminium joints under combined static loading and environmental aging conditions. Proceedings of the Adhesion Society Annual Meeting February 13-16, 2011, Savannah, GA, USA
2011, Savannah, GA. The Adhesion Society. 1-3. http://www.adhesionsociety.org/Publications/Proceeding%20Archive/2010/data/papers/017.pdf.
-
Saksala, Timo; Hokka, Mikko; Kuokkala, Veli-Tapani; Mäkinen, Jari.
Numerical Simulation of Dynamic Brazilian Disc Test on Rock. In: Freund, Jouni; Kouhia, Reijo (ed.). Proceedings of the 24th Nordic Seminar on Computational Mechanics, Aalto University publication series. SCIENCE + TECHNOLOGY
23/2011, 2011, Espoo. Aalto University. 154-157. http://nscm-24.aalto.fi/docs/NSCM-24_Proceedings.pdf.
-
Santa-aho, Suvi; Vippola, Minnamari; Lindgren, Mari; Sorsa, Aki; Leiviskä, Kauko; Lepistö, Toivo.
Use of Low Frequency Barkhausen Noise for Inspection of Induction Hardened Rod Samples. ICBM-9, 9th International Conference on Barkhausen Noise and Micromagnetic Testing, June 28-30, 2011, Technical University of Liberec, Czech Republic, Conference Proceedings
2011, Liberec. Technical University of Liberec. 1-13.
-
Tuominen, Jari; Näkki, Jonne; Pajukoski, Henri; Peltola, T.; Vuoristo, Petri; Kuznetsov, M.; Pozdeeva, E.; Zemlyakov, E.; Turichin, G.
Laser cladding with 15 kW fiber laser. In: Halmöy, Einar (ed.). 13th NOLAMP Conference, 13th Conference on Laser Materials, Processing in the Nordic Countries, 27 - 29 June 2011, Trondheim, Norway
2011, Trondheim. Norwegian University of Sciecne and Technology. 1-12.
-
Vrkoslavova, Lucie; Ganev, Nikolaj; Santa-aho, Suvi; Vippola, Minnamari; Lepistö, Toivo.
Study of Case-hardened and Nitrided Samples Using Barkhausen Noise Analysis and X-ray Diffraction. ICBM-9, 9th International Conference on Barkhausen Noise and Micromagnetic Testing, June 28-30, 2011, Technical University of Liberec, Czech Republic, Conference Proceedings
2011, Liberec. Technical University of Liberec. 1-10.
Non-Refereed Articles int'l
2010
-
Curtze, Sven; Kuokkala, Veli-Tapani.
Effects of temperature and strain rate on the tensile properties of twip steels. 1st TMS/ABM International Materials Congress, Dynamic Behavior of Materials, July 26-30, 2010, Rio de Janeiro, Brazil
2010, 4185-4194.
-
Hakala, Tomi; Harlin, Ali.
Analysis of press felt materials. Nordic Polymer Days 2010, Helsinki, May 24-26 2010
2010, 74.
-
Hoikkanen, Maija; Vuorinen, Jyrki.
Mechanical durability of polyamide-stainless steel hybrids. 14th European Conference on Composite Materials ECCM14, 7-10 June, 2010, Budapest, Hungary
2010, 105-ECCM14, 1-8.
-
Hoikkanen, Maija; Yumasheva, Tatyana; Bespalova, Natalia; Vuorinen, Jyrki.
Testing a new catalyst for open-air moulding of PDCPD. Proceedings of SEICO 10 SAMPE Europe 31st International Conference, Improvement of Materials and Application Charateristics, April 12-14, 2010, Paris, France
2010, 296-301.
-
Hokka, Mikko; Kokkonen, Jari; Seidt, Jeremy; Matrka, Thomas; Gilat, Amos; Kuokkala, Veli-Tapani.
Dynamic torsion properties of ultrafine grained aluminum. Proceedings of the 2010 SEM Annual Conference and Exposition on Experimental and Applied Mechanics, June 7-10, 2010, Indianapolis, Indiana USA
2010, 1-8.
-
Hokka, Mikko; Seidt,. J.; Matrka, T.; Gilat, A.; Kuokkala, Veli-Tapani; Kokkonen, Jari; Muller, S.
Characterization of the mechanical behavior of ultrafine-grained metals using digital image correlation. In: Bremand F. (ed.). ICEM14, 14th International Conference on Experimental Mechanics, Poitiers, France, 4-9 July, 2010. European Physical Journal EPJ Web of Conferences
6, 2010, 05005, 1-8. http://dx.doi.org/10.1051/epjconf/20100605005.
-
Hokka, Mikko; Seidt, Jeremy; Matrka, Thomas; Gilat, Amos; Kuokkala, Veli-Tapani; Nykänen, Juha; Müller, Sören.
Compression behavior of near-UFG AZ31 Mg-alloy at high strain rates. Proceedings of the 2010 SEM Annual Conference and Exposition on Experimental and Applied Mechanics, June 7-10, 2010, Indianapolis, Indiana USA
2010, 1-7.
-
Isakov, Matti; Kuokkala, Veli-Tapani; Ruoppa, R.
Microstructural and methodological aspects of dynamic testing of stainless steels. In: Khan A.S.; Farrokh, B. (ed.). Finite Plasticity and Visco-plasticity of Conventional and Emerging Materials. Proceedings of PLASTICITY´10: The Sixteenth International Symposium on Plasticity and its Current Applications, St. Kitts, West Indies, January 3-8, 2010
2010, 91-93.
-
Kabir, Md.E.; Chen, Weinong W.; Kuokkala, Veli-Tapani.
Measurement of stresses and strains in high rate triaxial experiments. Proceedings of the 2010 SEM Annual Conference and Exposition on Experimental and Applied Mechanics, June 7-10, 2010, Indianapolis, Indiana USA
2010, 128-129.
-
Kuokkala, Veli-Tapani; Apostol, Marian; Hokka, Mikko.
High and low temperature techniques in Hopkinson split bar testing. Proceedings of the IMPLAST 2010 Conference, October 12-14, 2010, Providence, Rhode Island, USA
2010, 1-9.
-
Laurila, Jussi; Niemi, Kari; Vuoristo, Petri.
Degradation mechanism of thermally sprayed coatings in chloride containing electrolytes. ITSC2010 International Thermal Spray Conference & Exposition, 3.-5.5.2010, Singapore
2010, DVS 264, 1-6.
-
Määttä, A.; Kanerva, U.; Vuoristo, Petri.
Structure and tribological characteristics of HVOF coatings sprayed from powder blends of Cr3C2-25NiCr and NiCrBSi alloy. Proceedings of ITSC2010 International Thermal SPray Conference & Exposition, Singapore, May 3-5. 2010
2010, 5 p.
-
Nousiainen, Pertti; Vilhunen, P.
Research and development priorities of textiles for Finnish National Defence. NATO Advanced Study Institute. Defense related intelligent textiles and clothing for ballistic and NBC (nuclear, biological, chemical) protection. 6-16 April 2010, Split, Croatia
2010, 23-24.
-
Puranen, Jouni; Lagerbom, Juha; Hyvärinen Leo; Kylmälahti, Mikko; Vuoristo, Petri.
The structure and properties of plasma sprayed Fe doped manganese cobalt oxide spinel coatings for SOFC metallic interconnectors. ITSC2010, International Thermal Spray Conference & Exposition, 3.-5.5.2010, Singapore
2010, DVS 264, 1-5.
-
Santa-Aho, Suvi; Hakalahti, Johanna; Vippola, Minnamari; Lepistö, Toivo; Lindgren, M.; Hakanen, M.
The use of Barkhausen noise to detect the case-depth of induction hardened samples. 8th International Conference on Barkhausen Noise and Micromagnetic Testing (ICBM8), February 11-12, 2010, Anupuram, India
2010, 1-12.
-
Santa-Aho, Suvi; Sorsa, Aki; Vippola, Minnamari; Latokartano, Jyrki; Lindgren, Mari; Lepistö, Toivo.
Laser produced grinding burns for Barkhausen noise measurement result validation. The Seventh International Conference on Condition Monitoring and Machinery Failure Prevention Technologies CM2010 / MFPT 2010, 22-24 June 2010, Ettington Chase, Stratford-upon-Avon, England
2010, 1-12.
-
Sarlin, Essi L.; Luukkonen, Asta; Vippola, Minnamari; Vuorinen, Jyrki E.; Lepistö, Toivo K.
Failure behavior of a three-layer steel/rubber/FRP hybrid structure. Prodeedings of the Seventh Asian-Australasian Conference of Composite Materials, ACCM, November 15-18, 2010, Taipei, Taiwan
2010, 1-4.
-
Turto, Kirsi; Berg, Tommi; Vuorinen, Jyrki.
Release agents in filament winding. Proceedings of SEICO 10 SAMPE Europe 31st International Conference, Improvement of Materials and Application Charateristics, April 12-14, 2010, Paris, France
2010, 665-670.
-
Vuorinen, Jyrki; Kuokkala, Veli-Tapani; Schwarz, Ricardo B.
Ultrasound spectroscopy: Application on MMC and PMC materials. Proceedings of SEICO 10 SAMPE Europe 31st International Conference, Improvement of Materials and Application Charateristics, April 12-14, 2010, Paris, France
2010, 543-549.
Non-Refereed Articles int'l
2009
-
Aho, J., Rolon-Garrido, V.H., Syrjälä, S. & Wagner, M.H.
Extensional viscosity in uniaxial extension and contraction flow - comparison of experimental methods and application of the molecular stress function model. In: Nevalainen, K. (ed.). Annual Transactions the Nordic Rheology Society, Papers Presented at the Nordic Rheology Conference, Reykjavik, Iceland, August 18-20, 2009.
17, 2009, pp. 167-173.
-
Heikkilä, P. & Harlin, A.
Application of electrospun materials in filtration. TechTex India.
3, 2009, 1, pp. 26-27.
-
Hokka, M. & Kuokkala, V.-T.
Dynamic tensile testing of polyamide sheets using the HSB technique. Proceedings of the 2009 SEM Annual Conference and Exposition on Experimental and Applied Mechanics, June 1-4, 2009, Albuquerque, New Mexico USA.
2009, 7 p.
-
Honkanen, M., Hoikkanen, M., Menon, K., Vippola, M., Vuorinen, J. & Lepistö, T.
Characterization of silane layer in metal-silane-plastic -hybrid structure. Scandem 2009, Annual Meeting of the Nordic Microscopy Society, University of Iceland, Reykjavik, Iceland, June 8-10, 2009, Book of Abstracts.
2009, p. 54.
-
Isakov, M., Kuokkala, V.-T. & Ruoppa, R.
Effect of prior deformation onf the dynamic behavior of metastable austenitic stainless steel. Proceedings of the 2009 SEM Annual Conference and Exposition on Experimental and Applied Mechanics, June 1-4, 2009, Albuquerque, New Mexico, USA.
2009, 9 p.
-
Koivuluoto, H., Kotilainen, M. & Vuoristo, P.
Overview of structure and properties of high-pressure and low-pressure cold-sprayed coatings. Welding and Cutting.
8, 2009, 2, pp. 98-103.
-
Koivuluoto, H., Kulmala, M. & Vuoristo, P.
Structural properties of high-pressure cold-sprayed and low-pressure cold-sprayed coatings. In: Sudarshan, T.S. & Nylen, P. (eds.). Surface Modification Technologies XXII, Proceedings of the Twenty Second International Conference on Surface Modification Technologies, 22.-24.9.2008, Trollhättan, Sweden.
2009, pp. 65-72.
-
Koivuluoto, H., Vuoristo, P. & Näkki, J.
Structure and corrosion behavior of cold-sprayed tantalum coatings. In: Marble, B.R. et al. (eds.). Preceedings of the 2009 International Thermal Spray Conference, 4.-7.5.2009, Las Vegas, Nevada, USA.
2009, pp. 314-319. http://dx.doi.org/10.1361/cp2009itsc0314.
-
Kokkonen, J., Kuokkala, V.-T., Seidt, J.D., Walker, A., Gilat, A., Olejnik, L. & Rosochowski, A.
High strain rate deformation analysis of UFG aluminum sheet samples. Proceedings of the 2009 SEM Annual Conference and Exposition on Experimental and Applied Mechanics, June 1-4, 2009, Albuquerque, New Mexico, USA.
2009, 7 p.
-
Kuokkala, V.-T., Isakov, M., Rämö, J., Curtze, S. & Hokka, M.
Effects of adiabatic heating on the plasticity of steels at high strain rates. In: Khan, A.S. et al. (eds.). Macro- to Nano-scale Inelastic Behavior of Materials: Plasticity, Fatigue, and Fracture. Proceedings of Plasticity ´09: the 15th International Symposium on Plasticity and its Current Applications, St. Thomas, US Virgin Islands, January 3.-8. 2009.
2009, pp. 154-156.
-
Latokartano, J., Pajukoski, H. & Vuoristo, P.
Axially symmetric laser in surface treatment applications. 12th Nordic Conference on Laser Materials Processing, NOLAMP Conference 2009, 24-26 August, 2009, Copenhagen, Denmark.
2009, 10 p.
-
Leemet, T., Hokka, M. & Kuokkala, V.-T.
High strain rate properties of Ti-15-3 alloy at ambient and elevated temperatures. 7th International Conference on Modern Practice in Stress and Vibration Analysis, 8-10 September 2009, Murray Edwards College, Cambridge, UK.
2009, pp. 57-64.
-
Luukkonen, A., Sarlin, E., Villman, V., Hoikkanen, M., Vippola, M., Kallio, M., Vuorinen, J. & Lepistö, T.
Heat generation in dynamic loading of hybrid rubber-steel composite structure. ICCM17 Edinburgh, 17th International Conference on Composite Materials, 27-31 July 2009, Edinburgh, UK.
2009, 11 p.
-
Mäntylä, T.
Preparation of TiO2 photocatalysts for controlling the fouling of surfaces. In: Keiski, R. et al. (eds.). Environmental Applications of TiO2 Photocatalysis, COST Actions 540, 543 and P19 Training School, University of Oulu, 4.-8.5.2009, Oulu, Finland.
2009, s. 49-56.
-
Nevalainen, K., Suihkonen, R., McNally, T., Harkin-Jones, E., Syrjälä, S., Vuorinen, J., Järvelä, P. & Isomäki, N.
Rheological properties of melt-compounded nanocomposites of atomic-layer-deposition-coated polyamide and polystyrene powders. In: Nevalainen, K. (ed.). Annual Transactions the Nordic Rheology Society, Papers Presented at the Nordic Rheology Conference, Reykjavik, Iceland, August 18-20, 2009.
17, 2009, pp. 149-156.
-
Nikkanen, J.-P., Zhang, X., Kanerva, T., Rintala, J., Petterson, M., Levänen, E. & Mäntylä, T.
Carbon nanotubes over novelly synthesized alumina supported iron catalyst. In: Thomas, S. et al. (eds.). Proceedings of ICNM-2009, 1st International Conference on Nanostructured Materials and Nanocomposites ICNM-2009, 6.-8.4.2009, Kottayam, India.
2009, Applied Science Innovations Private Limited. pp. 344-349.
-
Nousiainen, P., Hermawan, E. & Vehviläinen, M.
Stabilization of cellulose particles from aqueous alkaline polymeric solution. EPNOE 2009, Polysaccharides as a Source of Advanced Materials, September 21-24, 2009 Turku/Åbo, Finland.
2009, 1 p.
-
Rissa, K., Ratia, V., Terva, J. & Lepistö, T.
Characterization of wear resistant steels. Scandem 2009, Annual Meeting of the Nordic Microscopy Society, University of Iceland, Reykjavik, Iceland, June 8-10, 2009, Book of Abstracts.
2009, p. 59.
-
Santa-aho, S., Vippola, M., Lepistö, T. & Lindgren, M.
Case study of grinding burn detection of case-hardened gear wheel with barkahausen noise measurements. The sixth International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, CM2009 / MFPT 2009, 23-25 June 2009, Dublin, Ireland.
2009, 12 p.
-
Santa-aho, S., Vippola, M., Lepistö, T., Lindgren, M., Siiriäinen, J., Latokartano, J., Virkkunen, I. & Kemppainen, M.
Characterization of laser and induction simulated grinding burns with Barkhausen noise measurements. In: Suortti- Suominen, T. (ed.). 7th International Conference on Barkhausen Noise and Micromagnetic Testing, July 15-16, 2009, Aachen, Germany.
2009, 12 p.
-
Sorsa, A., Leiviskä, K., Santa-aho, S., Vippola, M. & Lepistö, T.
Quality feature modelling of laser processed grinding burns based on Barkhausen noise measuments. NDT 2009, Conference and Materials Testing 2009 Exhibition, 15-17 September 2009, Blackpool, UK.
2009, 10 p.
-
Suihkonen, R., Nevalainen, K., Siltanen, S., Vuorinen, J. & Järvelä, P.
Evaluation of wear test apparatus and comparative study on the tribological properties of epoxy nanocomposites. Proceedings of SEICO 09, SAMPE International Jubilee Conference, 24-26 March, 2009, Paris, France.
2009, pp. 126-133.
-
Suihkonen, R., Nevalainen, K. & Vuorinen, J.
The effect of ammonium phosphate and nanoclay on the rheological, thermal, and flame retardant properties of epoxy. In: Nevalainen, K. (ed.). Annual Transactions the Nordic Rheology Society, Papers Presented at the Nordic Rheology Conference, Reykjavik, Iceland, August 18-20, 2009.
17, 2009, pp. 263-268.
-
Terva, J. & Kuokkala, V.-T.
Cross-sectional EBSD analysis of heavily worn surfaces. Scandem 2009, Annual Meeting of the Nordic Microscopy Society, University of Iceland, Reykjavik, Iceland, June 8-10, 2009, Book of Abstracts.
2009, p. 58.
-
Tuominen, J., Latokartano, J., Vihinen, J. & Vuoristo, P.
Back reflection in direct high power diode laser (HPDL) cladding. 5th International Congress on Laser Advanced Materials Processing, LAMP2009, June 29-July 2, 2009, Kobe, Japan.
2009, 4 p.
-
Turto, K., Berg, T. & Vuorinen, J.
Influence of fibre tension on the properties of the filament wound tubes. Proceedings of SEICO 09 SAMPE Europe International Conference, March 23-25 2009, Paris, France.
2009, pp. 635-641.
-
Vippola, M., Lepistö, T., Koivisto, J., Vanhala, E., Tuomi, T., Hämeri, K., Riikonen, J. & Lehto, V.-P.
Characterization of reactor-generated titanium dioxide nanopowder used in inhalation exposure experiments. Scandem 2009, Annual Meeting of the Nordic Microscopy Society, University of Iceland, Reykjavik, Iceland, June 8-10, 2009, Book of Abstracts.
2009, p. 22.
-
Zhang, X., Levänen, E. & Mäntylä, T.
Superhydrophobic antireflective boehmite film made by sol-gel technique on glass. Glass Performance Days, 11th International Conference on Architectural and Automotive Glass, 12.-15.5.2009, Tampere, Finland.
2009, pp. 630-632.
Non-Refereed Articles int'l
2008
-
Aromaa, M., Nikkanen, J-P., Teini, S., Levänen, E., Mäntylä, T. & Mäkelä, J.M.
Fabrication of titanate nanowires and nanotubes from liquid flame spray generated titania nanoparticles. European Aerosol Conference EAC 2008, 24-29 August 2008, Helexpo, Thessaloniki, Greece.
2008, 1 p.
-
Borg, T. & Pääkkönen, E.J.
Start-up and transient flow effects fron the molecular weight distribution. In: Co, A. et al. (eds.). The XVth International Congress on Rheology, The Society of Rheology 80th Annual Meeting, 3-8 August, 2008, Monterey, California, USA.
1027, 2008, American Institute of Physics. pp. 448-450.
-
Curtze, S., Kundu, M., Kuokkala, V.-T., Datta, S. & Chattopadhyay, P.P.
Dynamic properties of new generation high-strength steels for armoring applications. Proceedings of the 2008 SEM XI International Congress and Exposition on Experimental and Applied Mechanics, June 2-5, 2008, Orlando, Florida, USA.
2008, pp. 167-173.
-
Hakala, S., Hoikkanen, M., Helminen, A. & Vuorinen, J.
Regeneration of carbon fibers and their re-use in thermoplastic compounds. Proceedings of SEICO 08 SAMPE Europe International Conference, 31 March-2 April, 2008, Paris, France.
2008, pp. 555-560.
-
Hoikkanen, M., Honkanen, M., Luukkonen, A., Vippola, M., Vuorinen, J. & Lepistö, T.
Thermoplastic urethane-steel hybrids: Relationship between steel surface structure and macroscopic properties. IRC ´08 International Rubber Conference & Exhibition, Kuala Lumpur, Malaysia, 20.-23. October 2008.
2008, 11 p.
-
Hokka, M., Curtze, S., Kuokkala, V.-T. & Peura, P.
Dynamic response of high-manganese TWIP steels. Proceedings of the 2008 SEM XI International Congress and Exposition on Experimental and Applied Mechanics, June 2-5, 2008 Orlando, Florida, USA.
2008, pp. 81-89.
-
Hokka, M., Kuokkala, V.-T. & Curtze, S.
Dynamic behavior and numerical modeling of trip and dp steels at different termperatures. In: Khan, A.S. et al. (eds.). Mechanics and Mechanism of Finite Plastic Deformation, Proceedings of PLASTICITY´08: The Fourteenth International Symposium on Plasticity and its Current Applications, Hawaii, January 3-8, 2008.
2008, pp. 226-228.
-
Honkanen, M., Hoikkanen, M., Vippola, M., Vuorinen, J. & Lepistö, T.
Effect of surface treatment on steel-TPU adhesion. Scandinavian Electron Microscopy Society Conference 2008 SCANDEM 2008, Lyngby, Denmark, June 2-4, 2008.
2008, 2 p.
-
Isakov. M, Kokkonen, J., Vuoristo, T., Kuokkala, V.-T., Rämö, J. & Ruoppa, R.
Investigation of the dynamic tensile properties of austenitic stainless sheet steels using tensile hopkinson split bar. Proceedings of the 6th European Stainless Steel Conference, Science and Market, Helsinki, Finland, June 10-13, 2008.
2008, pp. 499-504.
-
Koivuluoto, H., Lagerbom, J., Kylmälahti, M. & Vuoristo, P.
Microstructure and mechanical properties of low-pressure cold sprayed (LPCS) coatings. In: Lugscheider, E. (ed.) Conference Proceedings of International Thermal Spray Conference & Exposition, June 2-4, 2008, Maastricht, the Netherlands.
2008, 6 p.
-
Kokkonen, J., Kuokkala, V.-T., Olejnik, L. & Rosochowski, A.
Dynamic behavior of ECAP processes aluminum at room and sub-zero temperatures. Proceedings of the 2008 SEM XI International Congress and Exposition on Experimental and Applied Mechanics, June 2-5, 2008, Orlando, Florida, USA.
2008, pp. 164-172.
-
Kulmala, M., Koivuluoto, H. & Vuoristo, P.
Influence of laser irradiation on formation of low-pressure cold sprayed coatings. In: Lugscheider, E. (ed.) Conference Proceedings of International Thermal Spray Conference & Exposition, June 2-4, 2008, Maastricht, the Netherlands.
2008, 6 p.
-
Levänen, E. & Mäntylä, T.
Densification of nanosized titania deagglomerated by various methods. In: Heinrich, J.G. & Aneziris, C.G. (eds.) Proceedings of the 10th International Conference of the European Ceramic Society, June 17 - 21, 2007, Berlin, Germany.
2008, pp. 1401-1406.
-
Mäkinen, A., Levänen, E., Heikkinen, R., Kinnunen, T., Härkönen, M. & Mäntylä, T.
Evaluation of cohesion in porous ceramic films. In: Heinrich, J.G. & Aneziris, C.G. (eds.) Proceedings of the 10th International Conference of the European Ceramic Society, June 17 - 21, 2007, Berlin, Germany.
2008, pp. 2036-2039.
-
Metsäjoki, J., Huttunen-Saarivirta, E. & Lepistö, T.
High temperature oxidation of aluminized and uncoated ferritic-martensitic boiler steels. Eurocorr 2008, The European Corrosion Congress, 7-11 September 2008, Edinburgh, United Kingdom.
2008, 8 p.
-
Nevalainen, K., Hintze, C., Suihkonen, R., Eteläaho, P., Vuorinen, J., Järvelä, P. & Isomäki, N.
Rheological properties of melt-compounded and dilited nanocomposites of atomic-layer-deposition -coated polyamide particles. In: Aho, J. (ed.). The Nordic Rheology Conference, August 27-29, 2008, Copenhagen, Denmark. Annual Transactions, The Nordic Rheology Society.
16, 2008, pp. 125-133.
-
Nevalainen, K., Hintze, K., Suihkonen, R., Sundelin, J., Eteläaho, P., Vuorinen, J., Järvelä, P. & Isomäki N.
Comparison of melt-compounded nanocomposites of atomic-layer-deposition-coated polyamide particles and commercial nanofillers. Proceedings of 13th European Conference on Composite Materials, 2-5 June, 2008, Stockholm, Sweden.
2008, 10 p.
-
Nikkola, L., Jukola, H., Harlin, A. & Ashammakhi, N.
Nano fiber scaffold releasing diclofenac sodium. In: Tanskanen, J.M.A. et al. (eds.). Proceedings of the 5th Tampere Tissue Engineering Symposium, Tampere, Finland, April 23-25, 2008.
2008,
-
Reivonen, T., Laakso, P., Laurila, T., Anttila, E., Krintilä, O., Hernberg, R., Lassila, L., Vallittu, P., Levänen, E. & Mäntylä, T.
Laser micromachining of optical glass fiber. In: Heinrich, J.G. & Aneziris, C.G. (eds.) Proceedings of the 10th International Conference of the European Ceramic Society, June 17 - 21, 2007, Berlin, Germany.
2008, pp. 493-497.
-
Santa-Aho, S., Vippola, M. & Lepistö, T.
Characterization of case-hardened gear steel by multiparameter barkhausen noise measurements. NDT 2008 Conference, the 47th Annual Conference of the British Institute of Non-Desctructive Testing, 16-18 September 2008, Cheshire, UK.
2008, 10 p.
-
Sorsa, A., Leiviskä, K. & Santa-Aho, S.
Prediction of residual stress from Barkhausen noise signal. NDT 2008 Conference, the 47th Annual Conference of the British Institute of Non-Desctructive Testing, 16-18 September 2008, Cheshire, UK.
2008, 10 p.
-
Suihkonen, R., Nevalainen, K., Villman, V., Vuorinen, J. & Järvelä, P.
Wear and friction behaviour of polyethylene nanocomposites evaluated by two pin-on-disc apparatuses. In: Kleemola, J. & Lehtovaara, A. (eds.) Abstracts, 13th Nordic Symposium on Tribology, NORDTRIP 2008, Tampere, Finland.
2008, p. 122.
-
Suihkonen, R., Villman, V., Vuorinen, J., Nevalainen, K., Sundelin, J., Keinänen, P., Järvelä, P. & Lepistö, T.
The effect of nanoparticles on the mechanical properties of epoxy composite structures. Proceedings of SEICO 08 SAMPE Europe International Conference, 31 March-2 April, 2008, Paris, France.
2008, pp. 454-459.
-
Tuominen, J., Latokartano, J. & Vuoristo, P.
Fully closed-loop semi-automatic laser cladding cell in a serial production of small tools. Proceedings of 27th International Congress on Applications of Lasers & Electro-Optics ICALEO, 20-23 October, 2008, Temecula, USA.
2008, pp. 85-93.
-
Vippola, M., Falck, G., Lindberg, H., Suhonen, S., Vanhala, E., Norppa, H., Tossavainen, A., Tuomi, T. & Lepistö, T.
Nanoparticle characterization for in vitro toxicity tests. Scandinavian Electron Microscopy Society Conference 2008 SCANDEM 2008, Lyngby, Denmark, June 2-4, 2008.
2008, 2 p.
-
Zhang, X., Pore, V., Järn, M., Peltonen, J., Vuorinen, T., Levänen, E. & Mäntylä, T.
Effect of temperature and film thickness on the antireflective property of superhydrophobic boehmite films by the sol-gel technique. In: Heinrich, J.G. & Aneziris, C.G. (eds.) Proceedings of the 10th International Conference of the European Ceramic Society, June 17 - 21, 2007, Berlin, Germany.
2008, pp. 1407-1412.
Non-Refereed Articles int'l
2007
-
Curtze, S., Hokka, M., Kuokkala, V.-T. & Peura, P.
Dynamic behavior of TRIP and DP steels in tension at different temperatures. Materials Science & Technology, 2007 Conference and Exhibition, September 16-20, 2007, COBO Center, Detroit, Michican.
2007, 10 p.
-
Eteläaho, P., Haveri, S. & Järvelä, P.
The effect of surface modification of filler and two-step processing on the processing on the properties of PP based nanocomposites. Nanopolymers 2007, The 1st International Conference, 12-13 June, Berlin, Germany.
2007, 10 p.
-
Hokka, M., Curtze, S. & Kuokkala, V.-T.
Tensile HSB testing of sheet steels at different temperatures. Proceedings of the 2007 SEM Annual Conference and Exposition on Experimental and Applied Mechanics, June 4-6, 2007, Springfield, Massachusetts USA.
2007, pp. 250-256.
-
Hölsä, J., Vihinen, J. & Vuoristo, P.
Laser surface structuring with as ultra short pulse fibre laser. In: Kujanpää, V. et al. (eds.). 11th Nolamp Conference in Laser Processing of Materials, Lappeenranta, Finland, August 20-22, 2007. Acta Universitatis Lappeenrantaensis.
273, 2007, pp. 657-663.
-
Kulmala, M., Vuoristo, P.
Influence of process conditions in laser-assisted low-pressure cold spraying. 3rd RIPT, Third International Meeting on Thermal Spraying, 6.-7.12.2007, Lille, France.
2007, 19 p.
-
Mäenpää, M., Niemi, A.-M., Myllymaa, M., Vuorinen, J. E., Andersson, P. H. & Järvelä, P.
Drilling carbon-epoxy -composite using special drills. In: Erath, M. A. (ed.). Proceedings of the 28th International Conference of the Society for the Advancement of Materials and Process Engineering, SEICO 2007, "The Use of composites in the 21st Century to Save Energy and Weight", April 2-4, 2007, Paris, France.
2007, pp. 344-349.
-
Mäenpää, M., Niemi, A.-M., Vuorinen, J.E., Andersson, P.H. & Järvelä, P.
Machining glass fiber reinforced plastic using a step drill. In: Joyce, P., Vizzini, A. & Beckwith, S. W. (eds.). Proceedings of SAMPE '07, Society for the Avancement of Material and Process Engineering, June 3-7, 2007, Baltimore, MD, USA.
52, 2007, 9 pp.
-
Mäenpää, M., Niemi, A.-M., Vuorinen, J. E., Myllymaa, M., Andersson, P. H. & Järvelä, P.
Drilling carbon-epoxy composite using special drills. In: Joyce, P., Vizzini, A. & Beckwith, S. W. (eds.). Proceedings of SAMPE '07, Society for the Avancement of Material and Process Engineering, June 3-7, 2007, Baltimore, MD, USA.
52, 2007, 13 p.
-
Nevalainen, K., Vuorinen, J., Villman, V., Suihkonen, R., Järvelä, P. Sundelin, J. & Lepistö, T.
Characterization of twin screw extruder compounded polycarbonate nanoclay composites. Polymer Nanocomposites 2007, 4th International Symposium on Polymer Science and Technology, Boucherville, Quebec, Canada, October 17-19, 2007.
2007, 29 p.
-
Nikkanen, J.-P., Keskinen, H., Aromaa, M., Järn, M., Kanerva, T., Levänen, E., Mäkelä, J.M. & Mäntylä, T.
Composite alumina-zirconia nanoparticle synthesis by Liquid Flame Spray (LFS) from metal organic precursors. In: Kleijn, C.R. (ed.). Sixteenth European Conference on Chemical Vapor Deposition, 16-21.9.2007, Schveningen, Den Haag, The Netherlands. Book of Extended Abstracts.
2007, pp. 130-132.
-
Nurminen, J., Riihimäki, J., Näkki, J. & Vuoristo, P.
Hybrid laser cladding by wire. In: Kujanpää, V. et al. (eds.). 11th Nolamp Conference in Laser Processing of Materials, Lappeenranta, Finland, August 20-22, 2007. Acta Universitatis Lappeenrantaensis.
273, 2007, pp. 282-290.
-
Poikelispää, M. & Vuorinen, J.
Virtual education in rubber technology. 5th International Conference on Technology in Teaching and Learning in Higher Education, 23.-24.7.2007, Nowy Sacz, Poland.
2007, 5 p.
-
Siik, K. & Vuorinen, J.
Compounding of plastic waste and GFRP waste - Recycling good qualities. Theplac 2007, International Workshop on Thermoplastic Matrix Composites, Ostuni (BR), Italy, June 28-29, 2007.
2007, 11 p.
-
Tuominen, J., Honkanen, M., Uusitalo, M., Ahmaniemi, S., Vuoristo, P. & Mäntylä, T.
Hot Corrosion Resistant Laser Coatings in Diesel Engine. In: Marple, B. R., Hyland, M. M., Lau, Y-C., Li, C-J., Lima, R. S. & Montavon, G. (ed.). Proceedings of the 2007 International Thermal Spray Conference, May 14-16. 2007, Beijing, China.
2007, pp. 1099-1104.
-
Vippola, M., Vanhala, E., Rossi, E., Pylkkänen, L., Lindberg, H., Falck, G. & Tuomi, T.
Characterizing nanosized-titania particles and carbon nanotubes for inflammatory and genotoxic effect studies - Case study in NANOSH-project. In: Habermehl-Cwirzen, K. et al. (eds.). Scandem 2007 Proceedings of 58th Annual Meeting of the Nordic Microscopy Society, 18-20 June, 2007, Espoo, Finland.
2007, pp. 97-98.
-
Vuoristo, P.
High velocity sprays boost hardmetal industrial coatings. Metal Powder Report.
2007, pp. 22-29.
Non-Refereed Articles int'l
2006
-
Aho, J. & Syrjälä, S.
Determination of the entrance pressure drop in capillary rheometry using Bagley correction and zero-length capillary. Annual Transactions of the Nordic Rheology Society, The NRC Conference, Stockholm, Sweden, June 12-14, 2006.
14, 2006, pp. 143-148.
-
Corti, R., Kaonpää, A. & Nikkilä, A.-P.
Effects of different edges treatments on the 4-point bending strenght of normal and tempered glass. Glass in it style.
2006, 1, pp. 12-16.
-
Curtze, S., Hokka, M., Kuokkala, V.-T. & Vuoristo, T.
Experimental analysis of the influence of specimen geometry on the tensile Hopkinson Split Bar test results of sheet steels. Materials Science & Technology, 2006, Conference and Exhibition, October 15-19, 2006,Cincinnati, Ohio.
2006, pp. 29-42.
-
Curtze, S., Kuokkala, V.-T. & Hokka, M.
Effect of specimen geometry on the tensile Hopkinson split bar test results of sheet steels. In: Jönsson, P. (ed.) Second Nordic Symposium for Young Scientist in Metallurgy, March 22-23, 2006, Stockholm, Sweden.
2006, 14 p.
-
Fabrin, P., Hoikkanen, M. & Vuorinen, J.
Adhesion of TPE on surface treated aluminum by injection molding. 20th Bratislava International Conference on Macromolecules, Advanced Polymeric Materials, Bratislava, Slovakia, June 11-15, 2006.
2006, pp. 42-43.
-
Hokka, M., Curtze, S., Kuokkala, V.-T., Vuoristo, T. & Peura, P.
Effect of strain rate and temperature on the mechanical behavior of TRIP and TWIP steels in tension and compression. MS&T´06, Materials Science and Technology 2006 Conference and Exhibition, October 15-19, 2006, Duke Energy Center, Cincincati, Ohio.
2006, pp. 53-62.
-
Keskinen, H., Mäkelä, J., Aromaa, M., Areva, S., Teixeira, C., Rosenholm, J.B., Pore, V., Ritala, M., Leskelä, M., Raulio, M., Salkinoja-Salonen, M., Levänen, E., Mäntylä, T. & Keskinen, J.
70ea liquid flame spray made titania and titania-silver nanoparticle deposits functionality as photocatalyst for organic- and biofilm removal. Fifth World Congress on Particle Technology, April 23-27, 2006, Florida, USA.
2006, 1 p.
-
Keskinen, H., Mäkelä, J.M., Aromaa, M., Keskinen, J., Areva, S., Teixeira, C.V., Rosenholm, J.B., Pore, V., Ritala, M., Leskelä, M., Raulio, M., Salkinoja-Salonen, M., Levänen, E. & Mäntylä, T.
Liquid flame spray made titania and titania-silver nanoparticle deposits; their functionality as photocatalyst for organic- and biofilm removal. In: Vehkamäki, H. et al. (eds.). NOSA 2006 Aerosol symposium, combined with the Finnish National Aerosol Symposium, Finnish-Czech Aerosol Symposium, and BACCI workshop, Helsinki, Finland, 8.-10.11.2006.
83, 2006, pp. 136-138.
-
Keskinen, H., Mäkelä, J.M., Aromaa, M., Keskinen, J., Levänen, E. & Mäntylä, T.
Liquid flame spray made silver, titania and titania-silver nanoparticle deposit. In: Biswas, P. et al. (eds.). Proceedings of the Seventh International Aerosol Conference, St. Paul, Minnesota, USA, September 10-15, 2006.
2006, p. 2.
-
Lepistö, T. & Kuokkala, V.-T.
Wear research at Tampere University of Technology: towards a Center of Excellence. Conference on Powder Metallurgy and Advanced Materials, 26.-27.1.2006, Tampere Hall, Tampere, Finland.
2006, 17 p.
-
Mäkelä, J., Keskinen, H., Aromaa, M., Levänen, E. & Mäntylä, T.
Deposition of TiO2-nanoparticles on a steel surface in liquid flame spray method. In: Biswas, P. et al. (eds.). Proceedings of the Seventh International Aerosol Conference, St. Paul, Minnesota, USA, September 10-15, 2006.
2006, USA. p. 65.
-
Nurminen, J., Riihimäki, J., Näkki, J. & Vuoristo, P.
Comparison of laser cladding with powder and hot and cold wire techniques. ICALEO 2006, 25th International Congress on Applications of Lasers & Electro-optics, 30 October-2 November, 2006, Doubletree Paradise Valley Resort, Scottsdale, USA.
2006, 4 p.
-
Vuoristo, P.J.
Industrial applications and opportunities of hardmetal coatings. The EURO PM2006 Congress and Exhibition, 22-23 October, 2006, Ghent, Belgium.
2006, 10 p.
-
Vuoristo, T., Kuokkala, V.-T., Rämö, J., Partinen, J. & Kolsi, J.
Strain rate dependent deformation behavior of cold heating steels. Asia Steel International Conference 2006, (Asia Steel ´06), 90th Anniversary, May 9-11, 2006 Fukuoka, Japan.
2006, pp. 902-907.
Non-Refereed Articles int'l
2005
-
Aho, J. & Syrjälä, S.
Evaluation of pressure dependence of viscosity for some polymers using capillary rheometer. In: Mason, S.L. (ed.), Annual transactions, The Nordic Rheology Society, , The Nordic Rheology Conference, Tampere, Finland, June 1-3, 2005.
13, 2005, pp. 55-60.
-
Corti, R., Kaonpää, A. & Nikkilä, A.-P.
Effect of different edges treatments on the 4-point bending strength of normal and tempered glass. Glass Processing Days, 9th International Conference on Architectural and Automotive Glass, Conference Proceedings, Tampere, Finland 17-20 June 2005.
2005, pp. 50-53.
-
Harju, M., Mäntylä, T., Areva, S., Järn, M., Halme, J. & Rosenholm, J.B.
Plasma sprayed oxide surfaces in aqueous environments. International Thermal Spray Conference & Exposition ITSC 2005, Basel, Swizerland, May 2 - 4, 2005.
2005, 5 p.
-
Honkanen, M., Vippola, M. & Lepistö, T.
Oxidation of copper alloys. EMC 2004, 13th European Microscopy Congress, Proceedings, August 22-27, 2004, Antwerp, Belgium.
2005, 2 p.
-
Honkanen, M., Vippola, M., Lepistö, T., Jiang, H., Kauppinen, E.
Oxidation of OF-, CuAg- and DHP-copper at 200C studied by AEM. EMC 2004, 13th European Microscopy Congress, Proceedings, August 22-27, 2004, Antwerp, Belgium.
2005, 2 p.
-
Jiang, H., Honkanen, M., Vippola, M., Kauppinen, E.I. & Lepistö, T.
TEm studies on the early stage of oxidation process of copper. EMC 2004, 13th European Microscopy Congress, Proceedings, August 22-27, 2004, Antwerp, Belgium.
2005, 2 p.
-
Keskinen, E., Vuoristo, T., Kuokkala, V.-T. & Martikainen, M.
Numerical analysis of Hopkinson split bar apparatus. 2005 SEM Annual Conference and Exposition on Experimental and Applied Mechanics, June 7-9, 2005, Portland Marriott Downtown Portland, Oregon US.
2005, pp. 203-210.
-
Lagerbom, J., Mäkinen, H. & Vuoristo, P.
Effect of heat treatment on properties of cold sprayed coatings. International Thermal Spray Conference & Exposition ITSC 2005, Basel, Swizerland, May 2 - 4, 2005.
2005, 5 p.
-
Mäntylä, T. & Uusitalo, M. & Vuoristo, P.
Hot corrosion and hot erosion resistant thermal spray coatings. The 2nd International Meeting on Thermal Spraying, Lille, France, 1-2 December.
2005, pp. 244-247.
-
Nurminen, J., Näkki, J. & Vuoristo, P.
Approval criteria for corrosion resistant laser coatings. In: Kaplan, A. (Ed). The 10th Nordic Laser Materials Processing Conference, 17-19 August, 2005, Luleå, Sweden.
2005, pp. 205-215.
-
Nurminen, J., Näkki, J. & Vuoristo, P.
Laser cladding on cast iron substrates. 24th International Congress on Applications of Lasers & Electro-Optics ICALEO 2005, Miami, Florida, USA, October 31 - November 3, 2005.
2005, pp. 655-659.
-
Nurminen, J., Näkki, J. & Vuoristo, P.
Microstructures and abrasion resistances of laser cladded MMC-coatings. International Thermal Spray Conference & Exposition ITSC 2005, Basel, Swizerland, May 2 - 4, 2005.
2005, 5 p.
-
Nurminen, J., Näkki, J. & Vuoristo, P.
On the wear properties of laser coatings with high carbide concentrations. 24th International Congress on Applications of Lasers & Electro-Optics ICALEO 2005, Miami, Florida, USA.
2005, pp. 648-654.
-
Nurminen, J. & Vuoristo, P.
Some considerations of approval criteria for laser cladding. In: Beyer, E. & al. (eds). Lasers in Manufacturing 2005, Proceedings of the Third International WLT-Conference, Munich, Germany, June 13th-16th, 2005.
2005, pp. 339-343.
-
Pastila, P., Nikkilä, A.-P., Mäntylä, T. & Lara-Curzio, E.
Tensile testing of SiC-based hot gas filters at 600 degrees C water vapor. In: Brito, M. et al. (eds). Proceedings of the 29th International Conference on Advanced Ceramics and Composites - Developments in Advanced Ceramics and Composites. Ceramic Engineering and Science Proceedings.
26, 2005, 8, pp. 69-76.
-
Peltola, P., Välipakka, E., Syrjälä, S. & Hanhi, K.
The influence of nanoparticles on rheological properties of polypropylene. In: Mason, S.L. (ed.) Annual Transactions, The Nordic Rheology Society, The Nordic Rheology Conference, Tampere, June 1-3, 2005.
13, 2005, pp. 163-167.
-
Storgårds, E., Harju, M., Levänen, E., Laakso, J. & Mäntylä, T.
Combining imaging techniques for studying biofouled stainless steel surfaces. 30th EBC Congress, Prague, Czech Republic, 14-19 May 2005.
2005,
-
Storgårds, E., Laitila, A., Ohligschläger, T., Harju, M., Laakso, J. & Mäntylä, T.
Effects of stainless steel finishing on biofouling and cleanability of surfaces intended for use in the brewing process. 30th EBC Congress, Prague, Czech Republic, 14-19 May 2005.
2005,
-
Suutala, J., Tuominen, J. & Vuoristo, P.
Corrosion properties of thermally sprayed in-situ laser remelted Ni-based coatings. 24th International Congress on Applications of Lasers & Electro-Optics ICALEO 2005, Miami, Florida, USA, October 31 - November 3, 2005.
2005, pp. 802-810.
-
Suutala, J., Tuominen, J. & Vuoristo, P.
Evaluation of laser remelting parameters for laser-assisted thermal spray process. In: Beyer, E. & al. (eds). Lasers in Manufacturing 2005, Proceedings of the Third International WLT-Conference, Munich, Germany, June 13th-16th, 2005.
2005, pp. 379-384.
-
Suutala, J., Tuominen, J. & Vuoristo, P.
Laser assisted spraying and laser treatment of thermally sprayed coatings. The 2nd International Meeting on Thermal Spraying, Lille, France, 1-2 December.
2005, pp. 143-154.
-
Suutala, J., Tuominen, J. & Vuoristo, P.
Laser remelting of thermally sprayed coatings by various types of laser beam profiles. In: Kaplan, A. (Ed). The 10th Nordic Laser Materials Processing Conference, 17-19 August, 2005, Luleå, Sweden.
2005, pp. 287-294.
-
Tuominen, J., Vuoristo, P. & Mäntylä, T.
Residual stresses in HPDL and Nd:YAG laser cladded coatings. 24th International Congress on Applications of Lasers & Electro-Optics ICALEO 2005, Miami, Florida, USA, October 31 - November 3, 2005.
2005, pp. 635-639.
-
Vippola, M., Honkanen, M., Kanerva, T., Lepistö, T., Polvinen, R., Valden, M., Suopanki, A. & Härkönen, M.
Characterization of high temperature induced deactivation process in various alumina supported exhaust catalysts. EMC 2004, 13th European Microscopy Congress, Proceedings, August 22-27, 2004, Antwerp, Belgium.
2005, 2 p.
-
Vippola, M., Honkanen, M., Lepistö, T., Polvinen, R., Valden, M., Suopanki, A. & Härkönen, M.
Effect of air-aging on the microstructure of various alumina supported exhaust catalysts. 11th Nordic Symposium on Catalysis, Catalysis for a Sustainable Future, May 23-25, 2004, Oulu, Finland.
2005, pp. 99-100.
-
Vuoristo, P., Tuominen, J. & Nurminen, J.
Laser coating and thermal spraying - process basics and coating properies. International Thermal Spray Conference & Exposition ITSC 2005, Basel, Swizerland, May 2 - 4, 2005.
2005, 8 p.
-
Vuoristo, T., Kuokkala, V.-T., Curtze, S. & Peura, P.
Effect of pre-straining on the apparent young´s modulus of bake-hardenable high strength steels. Proceedings of a Symposium Materials Science & Technology, Springback in Sheet Metal Forming Applications, September 25-28, 2005, Pittsburgh, Pennsylvania, USA.
2005, pp. 17-26.
Non-Refereed Articles int'l
2004
-
Apostol, M., Kuokkala, V.-T. & Vuoristo, T.
High temperature high strain rate behavior of OFHC copper with a compressive high temperature recovery split hopkinson pressure bar. ICEM12 - 12th International Conference on Experimental Mechanics, 29 August - 2 September, 2004, Politecnico di Bari, Italy.
2004, pp. 172-179.
-
Hokka, M., Kuokkala, V.-T., Siitonen, P. & Liimatainen, J.
Experimental techniques for the studying the behaviour of wear resistant materials under dynamical gouging and surface fatique. In: Pappalettere, C. (ed.). ICEM12 - 12th International Conference on Experimental Mechanics, 29 August - 2 September, 2004 Politecnico di Bari, Italy.
2004, pp. 155-162.
-
Kuokkala, V.-T., Hokka, M., Rämö, J. & Vuoristo, T.
Dynamic scratch testing of wear resistant materials by a modified hopkinson split bar device. 15th Technical Meeting DYMAT, Metz, France, 1-2 June, 2004.
2004, pp. 17-23.
-
Kuokkala, V.-T., Hokka, M., Rämö, J. & Vuoristo, T.
Dynamic scratch testing of wear resistant materials by a modified Hopkinson Split Bar device. Materiaux & Techniques.
2004, pp. 27-32.
-
Kuokkala, V.-T., Rämö, J. & Vuoristo, T.
Calibration of crusher pressure gauges by high strain rate testing. Proceedings of the 2004 SEM X International Congress and Exposion on Experimental and Applied Mechanics, June 7-10, 2004 Costa Mesa, California USA.
2004, pp. 158-167.
-
Nurminen, J., Näkki, J. & Vuoristo, P.
The influence of powder parameters on laser cladding process. Proceedings of the 23rd International Congress on Applications of Lasers and Electro-Optics, ICALEO 2004, October 4-7, 2004, San Francisco, USA.
2004, 5 p.
-
Tuominen, J., Vuoristo, P. & Mäntylä, T.
Microstructure and dry sliding wear properties of laser clad tribaloy coatings. Proceedings of the 1st Pacific International Conference on Application of Lasers and Optics PICALO 2004, April 19-21, 2004, Melbourne, Australia.
2004, pp. 13-17.
-
Vuoristo, T. & Kuokkala, V.-T.
Characterization of soft polymer roll covers. Proceedings of the 2003 SEM Annual Conference & Exposition on Experimental and Applied Mechanics, June 2-4, 2004, Charlotte, North Carolina, USA.
2004, pp. 64-74.
-
Vuoristo, T., Kuokkala, V.-T., Apostol, M., Peura, P., Tulonen, J. & Pirttijoki, J.
Deformation and work hardening of cold-formed high strength steels at high rates of strain. Materials Science & Technology 2004 Conference Proceedings, September 26-29, 2004, New Orleans, USA.
2004, pp. 471-480.
-
Vuoristo, T., Kuokkala, V.-T. & Peura, P.
Pre-strain dependent apparent Young´s modulus of automotive sheets steels. Proceedings of the 2004 SEM X International Congress and Exposion on Experimental and Applied Mechanics, June 7-10, 2004 Costa Mesa, California USA.
2004, pp. 162-170.
Non-Refereed Articles int'l
2003
Books and Reports int'l
2011
Books and Reports int'l
2009
Books and Reports int'l
2008
Books and Reports int'l
2007
Books and Reports int'l
2006
Books and Reports int'l
2003
Non-Refereed Articles (Finland)
2011
-
Mattila, Heikki; Mustonen, Milka.
Millä strategioilla suomalaiset vaaealan yritykset voivat menestyä kansainvälisesti?. Tekstiililehti.
2011, 3/2011, 17-19.
-
Mustonen, Milka; Hakala, Tomi; Nousiainen, Pertti.
ITMA 2011 - kestävää kehitystä. Tekstiililehti.
2011, 6, 13-18.
-
Nousiainen, Pertti.
Konferenssimatkoja. Tekstiililehti.
2011, 4, 6-6.
-
Nousiainen, Pertti.
Suomen tekstiiliteknillinen liitto 75 vuotta. Osia liiton puheenjohtajan Pertti Nousiaisen juhlapuheesta. Tekstiililehti.
2011, 6, 5-6.
-
Nousiainen, Pertti.
The Textile Institute 100-vuotias. Tekstiililehti.
2011, 2/2011, 8-9.
-
Rissanen, Marja; Puolakka, Arja; Nousiainen, Pertti.
Polylaktidistereokopolymeerin märkäkehruu. Tekstiililehti.
2011, 5, 21-23.
-
Varheenmaa, Minna; Peltonen, Claudia; Meinander, Harriet.
Monilta vaaroilta suojaavien ominaisuuksien ja käyttömukavuuden yhdistäminen äärioloissa käytettäviin suojavaatteisiin. Tekstiililehti.
2011, 5, 18-20.
Non-Refereed Articles (Finland)
2010
-
Hakala, Tomi.
Monipuoliset 3D-tekstiilikomposiitit. Tekstiilillehti.
2010, 4/10, 17-19.
-
Heikkilä, Pirjo.
Nanokuidut teknisissä materiaaleissa. Tekstiililehti.
2010, 1, 14-16.
-
Heinola, J.; Puolakka, Arja.
Uusista materiaaleista. Tekstiililehti.
2010, 1, 10-10.
-
Järvelä, Pentti.
Ajatuksia muovien muoteista ja työkaluista. MuoviPlast, Tietoisku.
2010, 3, 32-33.
-
Järvelä, Pentti.
Biomuovit. MuoviPlast, Tietoisku.
2010, 5, 32-33.
-
Järvelä, Pentti.
Kuormitetut muovit. MuoviPlast, Tietoisku.
2010, 6, 32-33.
-
Järvelä, Pentti.
Lämpökuvaus muovitekniikassa. MuoviPlast, Tietoisku.
2010, 2, 36-37.
-
Järvelä, Pentti.
Muovien imago eli yleiset mielikuvat muoveista. MuoviPlast, Tietoisku.
2010, 4, 32-33.
-
Järvelä, Pentti.
Suunnittele hyvin tai paremmin - älä huonosti. MuoviPlast, Tietoisku.
2010, 6, 32-33.
-
Mäkelä, Esa; Kamppuri, Taina.
Entsyymit tekstiiliprosessissa - tilannekatsaus. Tekstiililehti.
2010, 1, 13-13.
-
Meinander, Harriet; Varheenmaa, Minna; Honkala, Markku.
Safe@Sea-turvallisuutta kalastajille. Tekstiililehti.
3/2010, 2010, 11-11.
-
Mustonen, Mikko; Koivisto, Auroora.
Miksi ja miten raportoida yrityksen yhteiskuntavastuusta?. Modin.
2010, 6/2010, 50-51.
-
Mustonen, Milka.
Vaatteiden toimitusketju nyt ja tulevaisuudessa. Modin.
2010, 4/2010, 76-78.
-
Mustonen, Milka; Holma, Sini.
Vaatteiden toimitusketju - ongelmia ja visioita. Tekstiililehti.
2010, 6, 12-14.
-
Nousiainen, Pertti.
Challenges of the technology and business of modern textiles. Finatex, Teva-ala älykkäästi menestykseen -seminaari
2010, 1-54.
-
Nousiainen, Pertti.
Liiton syysretki tutki Italian tevaa. Tekstiililehti.
2010, 6, 6-8.
-
Nousiainen, Pertti.
Säterin taistelu voittoon. Tekstiililehti.
2010, 6, 11-11.
-
Partanen, Leena; Rissanen, Marja.
Tekstiilien tuoteturvallisuus - tullivalvonta. Tekstiililehti.
2010, 1, 11-12.
-
Rissanen, Marja.
Arjen ilmiöt -sarja: Puhdistaako aurinko pyykin?. Tiede.
2010, 7,
-
Talvenmaa, Päivi; Uotila, Minna; Louhevaara, Veikko; Rytilahti, Piia; Pitkänen, Marja.
Sustainable innvovative materials in high tech applications to promote wellbeing and adoption of new skills. Global Resonsibility in Research and Education - Practices in Partnerships and Daily Activities, September 15-17, 2010, University of Eastern Finland
2010, 23-24.
-
Varheenmaa, Minna.
Monen tieteen yhteinen hanke. Tekstiililehti.
2010, 14-15.
-
Varheenmaa, Minna.
Toiminnalliset kankaat. Tekstiililehti.
2010, 1, 17-17.
-
Vuorinen, Jyrki; Ellman, Asko.
Kehittyneet kelausteknologiat automatisoituna 3D-komposiittikappaleiden valmistusmenetelmänä - 3D FiWi. SISU 2010 - uusi tuotantoajattelu: loppuraportti. Tekesin ohjelmaraportti.
1/2010, 2010, 94-98.
Non-Refereed Articles (Finland)
2009
-
Järvelä, P.
Muovi ja/tai lasi. Muovi-Plast, Tietoisku.
2009, 2, pp. 26-27.
-
Järvelä, P.
Muovi ja urheilu. Muovi-Plast, Tietoisku.
2009, 3, pp. 32-33.
-
Järvelä, P.
Muovi vai metalli?. Muovi-Plast, Tietoisku, osa 64.
2009, 1, pp. 18-19.
-
Järvelä, P.
Muovit ja elintarvikkeet - muovit ja ruoka kotitalouksissa. Muovi-Plast, Tietoisku.
2009, 4, pp. 32-33.
-
Järvelä, P.
Muovit ja luonto. Muovi-Plast, Tietoisku.
2009, 7, pp. 32-33.
-
Järvelä, P.
Muovit ja ruoka - elintarvikepakkaukset. Muovi-Plast, Tietoisku.
2009, 5, pp. 32-33.
-
Järvelä, P.
Suuria muovituotteita. Muovi-Plast, Tietoisku.
2009, 6, pp. 32-33.
-
Kakkonen, M. & Vuorinen, J.
Lämpökuvaus lujitemuovituotteiden kunnonvalvonnassa. Promaint.
23, 2009, 2, pp. 44-45.
-
Kuokkala, V.-T.
Seostuksen vaikutus kulumiskestävyyteen. Seosaineiden optimaalinen käyttö, Vaikutukset terästen valmistettavuuteen ja tuoteominaisuuksiin, 27.-28.10.2009, Vuorimiesyhdistys, Pohto.
2009, 15 s.
-
Meinander, H. & Pylsy, A.
Vaatteiden lämmönsäätelyominaisuudet. Tekstiililehti.
2009, 1/09, s. 22.
-
Nousiainen, P.
Kuitu- ja tekstiililtekniikan tutkimus TTY:ssä. Tekstiililehti.
2009, 5, s. 8-9.
-
Nousiainen, P., Puolakka, A., Rissanen, M. & Mariani, C.
P(L/DL)LA 70/30 nanokuitujen sähkökehruu sydänläpän kudosten valmistamiseen. Tekstiililehti.
2009, 6/09, s. 16.
Non-Refereed Articles (Finland)
2008
-
Hakala, T. & Harlin, A.
Kiteisyyden merkitys puristinhuovan kuitumateriaalissa. Tekstiililehti.
2008, 4, s. 11-13.
-
Hämäläinen, H.
POLYKO - Muovitekniikan räätälöityjä opetusmateriaaleja. Muovi-Plast.
2008, 7, s. 8.
-
Harlin, A. & Heikkilä, P.
Production of carbon nano nonwoven by electrospinning a polymer precursor. Functional Material Solutions, VTT.
2008, pp. 11-13.
-
Harlin, A. & Pitkänen, M.
Tekstiilien hajut. Tekstiililehti.
71, 2008, 1, s. 19.
-
Järvelä, P.
Alipaine muovitekniikassa. Muovi-Plast; Tietoisku, osa 58.
2008, 3, s. 26-27.
-
Järvelä, P.
Materiaalin valinta muovituotteeseen. Muovi-Plast; Tietoisku, osa 57.
2008, 2, s. 24-25.
-
Järvelä, P.
Muovien myrkyllisyys. Muovi-Plast, Tietoisku, osa 62.
2008, 7, s. 22-23.
-
Järvelä, P.
Muovit ja energiatehokkuus. Muovi-Plast, Tietoisku, osa 61.
2008, 6, s. 22-23.
-
Järvelä, P.
Muovit ja materiaalitehokkuus. Muovi-Plast, Tietoisku, osa 63.
2008, 8, pp. 24-25.
-
Järvelä, P.
Muovit konstruktioissa. Muovi-Plast, Tietoisku, osa 60.
2008, 5, s. 18-19.
-
Järvelä, P.
Sarjakoko muovituotteen valmistuksessa. Muovi-Plast; Tietoisku, osa 56.
2008, 1, s. 26-27.
-
Järvelä, P.
Vakuumiruiskuvalu. Muovi-Plast; Tietoisku, osa 59.
2008, 4, s. 24-25.
-
Kamppuri, T.
Vesineulattuun kuitukankaaseen soveltuva regeneroitu selluloosakuitu entsymaattisesti käsitelystä sellusta. Tekstiililehti.
2008, 4, s. 15.
-
Mäkinen, R., Pynttäri, V., Sillanpää, H., Lilja, J., Virtanen, J., Mansikkamäki, P., Jantunen, H., Hagberg, J., Palukuru, V., Pekonen, A., Östman, K., Kanerva, T., Vippola, M. & Lepistö, T.
Mallinnus ja simulointi haasteena. Elektroniikkaa voi tulostaa. Prosessori.
2008, 11, s. 50-53.
-
Nousiainen, P.
Kuitu- ja tekstiiliteknologian opetus ja tutkimus TTY:ssä. Tekstiililehti.
2008, 6/08, s. 8-10.
-
Rissanen, M.
Kansainvälinen tekstiilialan E-TEAM-koulutus. Tekstiililehti.
2008, 2, s. 22.
-
Väänänen, R.
Kuitukankaiden pinnan modifiointi normaaliplasmalla. Tekstiililehti.
2008, 4, s. 14.
-
Varheenmaa, M.
Mikrobien kasvu ja haitat tekstiileissä. Tekstiililehti.
71, 2008, 1, s. 14-15.
Non-Refereed Articles (Finland)
2007
-
Järvelä, P.
Ainetta rikkomaton testaus, Tietoisku, osa 48. Muovi-Plast.
2007, 1, s. 22-24.
-
Järvelä, P.
Alihankinta muovituotteen valmistuksessa, Tietoisku osa 51. MuoviPlast.
2007, 5, s. 30-31.
-
Järvelä, P.
Kestomuovipohjaiset monikerroskalvot, Tietoisku osa 53. Muovi-Plast.
2007, 6, s. 30-31.
-
Järvelä, P.
Muovien kierrätyksen näkymiä, Tietoisku, osa 49. Muovi-Plast.
2007, 2, s. 24-25.
-
Järvelä, P.
Muovien sekoittaminen, Tietoisku, osa 55. Muovi-Plast.
2007, 8, s. 24-25.
-
Järvelä, P.
Muovituotteelle lisäarvoa. MuoviPlast.
2007, 3, s. 14-15.
-
Järvelä, P.
Muovituotteen valmistuksen ongelmista, Tietoisku, osa 52. Muovi-Plast.
2007, 4, s. 26-27.
-
Järvelä, P. A., Järvelä, P. & Peltotalo, H.
Jatkuvan oppimisen kierre. Muovi-Plast.
2007, 7, s. 22-23.
-
Järvelä, P. & Vuorinen, J.
Tampereen teknillisen yliopiston (TTY) Muovitekniikka ja alueellisten toimijoiden verkostoituminen. Muovi-Plast.
2007, 7, s. 23-24.
-
Koivuluoto, H., Lagerbom, J. & Vuoristo, P.
Matalapainekylmäruiskutus DYMET-tekniikalla - Menetelmän periaate ja pinnoitteiden ominaisuudet. Hitsaustekniikka.
57, 2007, 6, s. 14-17.
-
Lagerbom, J.
Termisen ruiskutuksen vuosittainen päätapahtuma ITSC2007 -konferenssi. Hitsaustekniikka.
57, 2007, 6, s. 20-21.
-
Mäenpää, M. & Niemi, A.-M.
Muovien ja muovikomposiittien poraus, Tietoisku, osa 54. Muovi-Plast.
2007, 7, s. 30-31.
-
Saarinen, T. & Aho, J.
Pohjoismainen Reologiaseura palvelee reologian parissa työskenteleviä. Muovi-Plast.
2007, 7, s. 24.
-
Siik, K. & Vuorinen, J.
Lujitemuovijätteen kierrätys Suomessa ja maailmalla : kaatopaikalta kivijalkaan. Muovi-Plast.
2007, 2, s. 10-12.
-
Turunen, E. & Vuoristo, P.
Terminen ruiskutus mahdollistaa pintojen moniuloitteisen räätälöinnin. Hitsaustekniikka.
57, 2007, 6, s. 2.
-
Vuoristo, P.
Termisen ruiskutuksen lisäaineet. Hitsaustekniikka.
57, 2007, 6, s. 22-28.
-
Vuoristo, P. & Nylen, P.
Terminen ruiskutus Pohjoismaissa. Hitsaustekniikka.
57, 2007, 6, s. 7-10.
Non-Refereed Articles (Finland)
2006
-
Hokka, M., Kuokkala, V.-T. & Vuoristo, T.
Mechanical testing of materials with the Hopkinson split bar technique. In: von Hertzen, R. et al. (eds.) Proceedings of The IX Finnish Mechanics Days, IX Suomen Mekaniikkapäivät, Lappeenrannan teknillinen yliopisto, 13.-14. kesäkuuta 2006, 1. kokouspäivän esitelmät. Lappeenrannan teknillinen yliopisto. Konetekniikan osasto. Raportti.
17, 2006, pp. 214-225.
-
Järvelä, P.
Adheesio, tietoisku, osa 41. MuoviPlast.
2006, 2, s. 25.
-
Järvelä, P.
Kestomuovin lämmitys (plastisointi) ja jäähdytys, Tietoisku, osa 46. Muovi-Plast.
2006, 7, s. 30-31.
-
Järvelä, P.
Kokoonpanoystävällinen suunnittelu (DFA), Tietoisku, osa 47. Muovi-Plast.
2006, 8, s. 18-19.
-
Järvelä, P.
Kuidut ja kuidutus, tietoisku, osa 42. MuoviPlast.
2006, 3, s. 20-21.
-
Järvelä, P.
Muovien räätälöinti, osa 2: Muovien prosessoinnin räätälöinti. MuoviPlast.
2006, 1, s. 18-19.
-
Järvelä, P.
Muovin iskulujuus, iskulujuuden merkitys, tietoisku, osa 45. Muovi-Plast.
2006, 6, s. 20-21.
-
Järvelä, P.
Muovituotteen muotoilu, tietoisku, osa 44. Muovi-Plast.
2006, 5, s. 22-24.
-
Järvelä, P.
Teknisten muovien kuluminen ja sen mittaaminen, tietoisku, osa 43. MuoviPlast.
2006, 4, s. 26.
-
Keskinen, H., Mäkelä, J.M., Aromaa, M., Ristimäki, J., Kanerva, T., Levänen, E., Mäntylä, T. & Keskinen, J.
Production of TiO2-Ag nanoparticle deposits by Direct Nanoparticle Deposition (DND) method. In: Kauranen, M. et al. (eds). Proceedings of the XL Annual Conference of the Finnish Physical Society, 9-11 March, 2006, Tampere, Finland. Tampere University of Technology. Institute of Physics. Report.
2006:1, 2006, p. 228.
-
Peltonen, H.
Älykäs kumi. MuoviPlast.
2006, 2, s. 22-23.
-
Storgårds, E. & Mäntylä, T.
Uudet pintamateriaalit ja prosessihygienia. Mallas ja Olut.
2006, 4, s. 101-109.
Non-Refereed Articles (Finland)
2005
-
Hokka, M.
High strain rate behavior of TRIP and TWIP steels. In: Koskinen, K. T. & Vilenius, M. (eds). TTY:n Tohtorikoulun seminaari 2005, Tampere 21.4.2005.
2005, 7 s.
-
Järvelä, P.
Ekotase ja elinkaarianalyysi. MuoviPlast.
2005, 5, s. 20.
-
Järvelä, P.
Ekstruusiopäällystys - Yhdistelmämateriaaleja joissa yhdistyvät usean materiaalin edut. MuoviPlast.
2005, 4, s. 13.
-
Järvelä, P.
Muovien kuivaaminen; Miksi muoveja kuivataan?. MuoviPlast, tietoisku, osa 38.
2005, 6, s. 32-33.
-
Järvelä, P.
Muovien kutistuminen ja sen hallinta sulatyöstössä. MuoviPlast, tietoisku, osa 39.
2005, 7, s. 26-27.
-
Järvelä, P.
Muovien räätälöinti, osa 1: Muoviraaka-aineen räätälöinti, tietoisku, osa 40. MuoviPlast.
2005, 8, s. 28-29.
-
Järvelä, P.
Muovien testauksesta. MuoviPlast, tietoisku, osa 35.
2005, 3, s. 24-25.
-
Järvelä, P.
Muovien vanheneminen. MuoviPlast, tietoisku, osa 33.
2005, 1, s. 32-33.
-
Järvelä, P.
Pieniä valmistussarjoja - miten ja millä ehdoilla. MuoviPlast, tietoisku, osa 34.
2005, 2, s. 22-23.
-
Järvelä, P.
Väriä muovituotteelle. MuoviPlast, tietoisku, osa 36.
2005, 4, s. 22-23.
-
Juhola, K.
Käytettyjen tekonivelten arkistointi ja vaurioanalyysi / Retrieval archieve for the hip endoprostheses. In: Koskinen, K. T. & Vilenius, M. (eds). TTY:n Tohtorikoulun seminaari 2005, Tampere 21.4.2005.
2005, 4 s.
-
Kuokkala, V.-T. & Vuoristo, T.
Myötönopeuden vaikutus terästen muodonmuutoskäyttäytymiseen. Materia.
2005, 1, s. 36-44.
-
Levänen, E.
Keraamimembraanin valmistus. Materiaalitieteellisen yhdistyksen ja Materiaaliopin laitoksen XXXIII kesäseminaari, 13.-14.6.2005, Lomasaari Marttinen, Virrat.
2005, 15 s.
-
Nevalainen, K.
Olemattoman pienestä suurta hyötyä. MuoviPlast.
2005, 7, s. 10-11.
-
Tiainen, T.
Materiaalitekniikka elämänuraksi, Alan imago ja kiinnostavuus. Materia.
2005, 1, s. 15-19.
-
Vuoristo, P.
Engineering surfaces by thermally sprayed polymer coatings. Engineering of Surface Properties of Plastic and Composite Materials/Thermal Analysis of polymers, Kokkola 20.-21.9.2005.
2005, 22 p.
-
Vuoristo, P.
Laserpinnoitus- ja pintakäsittely. Tampere Laser Summit Seminar 2005, New Laser Technologies for Renewing the Industry, 7.6.2005, TTY.
2005, s. 123-132.
-
Vuoristo, P.
Muovien terminen ruiskutus. Erikoisseminaari, Muovi- ja elastomeeritekniikan kesäseminaari, 9.-10.6.2005, Hotelli Ellivuori, Vammala.
2005, 7 s.
Non-Refereed Articles (Finland)
2004
-
Harju, M., Mäntylä, T., Järn, M., Halme, J., Areva, S. & Rosenholm, J.B.
Surface characterization of plasma sprayed oxide coatings exposed to aqueous environments. Likaantumattomat Pinnat, Teknologiaohjelman seminaari, Hotelli Haaga, Helsinki, 13.-14.10.2004.
2004, 7 s.
-
Huttunen-Saarivirta, E.
Kvasikiteet mullistivat kideopin. Kemia-Kemi.
31, 2004, 5, s. 41-43.
-
Isomäki, N.
Kestomuovipinnoitettu vaneri - monipuolinen konstruktiomateriaali (tietoisku, osa 28). MuoviPlast.
2004, 4, s. 22-23.
-
Järvelä, P.
Kierrätys - arkipäivää myös muovien maailmassa. MuoviPlast.
2004, 2, s. 18-19.
-
Järvelä, P.
Solustetuista muoveista. MuoviPlast, tietoisku osa 32.
2004, 8, s. 16-17.
-
Lagerbom, J. & Vuoristo, P.
Cold Spray -tekniikka - termisen ruiskutuksen uusin mahdollisuus. Hitsaustekniikka.
2004, 5, s. 37-40.
-
Latvakangas, T.
Jatkuva laadunvalvonta ruiskuvaluteollisuudessa (tietoisku, osa 27). MuoviPlast.
2004, 3, s. 18-19.
-
Peltonen, H.
Muovimagneetit (tietoisku, osa 26). MuoviPlast.
2004, 2, s. 20-21.
-
Perttula, J.
Teräksen raekoko ratkaisee, Puukonterän kovuus. Metsästys & Kalastus.
2004, s. 62-65.
-
Syrjälä, S.
Sulaindeksi voi johtaa harhaan. MuoviPlast, tietoisku osa 30.
2004, 6, s. 28.
-
Tirilä, H.-M.
Termoelastit. MuoviPlast, tietoisku osa 29.
2004, 5, s. 15.
-
Välipakka, E.
Muovien mikroskopia. MuoviPlast, tietoisku osa 31.
2004, 7, s. 20-21.
-
Vuoristo, P.
Terminen ruiskupinnoitus. Hitsaustekniikka.
2004, 5, s. 2-3.
-
Vuoristo, P.
Terminen ruiskutus - menetelmät, pinnoitteet ja teolliset sovellukset. Hitsaustekniikka.
2004, 5, s. 5-18.
-
Vuoristo, P.
Termisen ruiskutuksen toiminta Suomessa - teollinen pinnoitus, tutkimus, kehitys ja koulutus. Hitsaustekniikka.
2004, 5, s. 41-43.
Non-Refereed Articles (Finland)
2003
-
Aho, J. & Kulmala, J.
Puhdastilatekniikka ja muoviteollisuus. MuoviPlast, Tietoisku osa 21.
2003, 5, s. 18-19.
-
Hanhi, K.
Uusiokumin teollinen hyödyntäminen = UTH-projekti. Kumiviesti.
2003, 1, s. 9-10.
-
Hietaranta, T.
Ruiskuvaluleimaus eli ICM-tekniikka. MuoviPlast, Tietoiksu osa 19.
2003, 3, s. 16.
-
Järvelä, P.
Muovien liittäminen. MuoviPlast, Tietoisku osa 22.
2003, 6, s. 4-5.
-
Järvelä, P.
Muovien ultraäänihitsaus. MuoviPlast.
2003, 6, s. 12-13.
-
Järvelä, P.
Muovikomposiitit Tampereen teknillisen yliopiston opetusohjelmassa. MuoviPlast.
2003, 4, s. 12-13.
-
Järvelä, P.
Muovikomposiittien terminologia. MuoviPlast, Tietoisku osa 20.
2003, 4, s. 26.
-
Järvelä, P. & Hietaranta, T.
Monikomponenttiruiskuvalu ja liittäminen. MuoviPlast.
2003, 6, s. 18-19.
-
Keinonen, M.
Muovien paine-ominaistilavuus-lämpötila -riippuvuus. MuoviPlast, Tietoisku osa 24.
2003, 8, s. 10-11.
-
Keinonen, M.
Viskositetti ja sen mittaaminen. MuoviPlast, Tietoisku osa 17.
2003, 11, s. 12-13.
-
Kylmälä, M. & Nikkilä, M.
Kilpailukykyä muotin sisältä. MuoviPlast.
2003, 8, s. 12-13.
-
Kylmälä, M., Silen, J., Koikkalainen, P. & Lensu, A.
IDEAL -Tehokkaan, laadukkaan ja mukautuvan ruiskuvalun uudet älykkäät työkalut. MuoviPlast.
2003, 5, s. 20-21.
-
Lamminmäki, J.
Uusiokumimateriaalien prosessointi. MuoviPlast, Tietoisku osa 23.
2003, 7, s. 18.
-
Peltola, P.
Luonnonkuidut komposiittien lujitteina. MuoviPlast, Tietoisku osa 18.
2003, 2, s. 18.
-
Perttula, J.
Etanoli - kilpailukykyinen biopolttoaine. Tekniikan Maailma.
2003, 5, s. 121-124.
-
Perttula, J.
Pelit patarautaa, ostokohteena mekaaninen kamera. Kameralehti.
2003, 11, s. 82-84.
-
Perttula, J.
Terät kokeessa. Metsästys ja Kalastus.
2003, 1, s. 56-57.
Books and Reports (Finland)
2010
-
Rouhianen, Juulia; Tsitko, Irina; Vippola, Minnamari; Koivisto, Joonas.
Literature study on risks and risk assessment methods related to nanobased products and the recommended methodology for assessing risk of nano-fibrillar cellulose products. Scale-up Nanoparticles in Modern Papermaking - SUNPAP FP7, Theme 4, NMP - Nanosciences, Nanotechnologies, Materials and New Production Technologies.
2010, 40.
-
Tiainen, Tuomo; Nieminen, Mikko J.; Lindroos, Tomi.
Metallivaahtolujitteiset ballistiset suojausmateriaalit, Osa II Tiivistelmaraportti. MATINE.
2010, 1-10.
Books and Reports (Finland)
2009
-
Suihkonen, Reija; Pöllänen, Maija; Nevalainen, Katja; Suvanto, Mika; Pakkanen, Tuula; Vuorinen, Jyrki; Järvelä, Pentti; Lepistö, Toivo.
Improving the properties of plastics using nanofillers with enphasis on the fracture and deformation behaviour (NaKiKu), Final Report 2008. Tampereen teknillinen yliopisto. Muovi- ja elastomeeritekniikka. Raportti.
2009, 14/09,
-
Vippola, M., Bard, D., Sarlin, E., Tuomi, T. & Tossavainen, A.
Nanoatlas of selected engineered nanoparticles.
2009, Helsinki. Finnish Institute of Occupational Health. 80 p.
Books and Reports (Finland)
2008
-
Haveri, S., Keisala, M. & Järvelä, P.
Nanotäyteaineet ja solustettu polystyreeni (NEPS) - projektin loppuraportti. Tampereen teknillinen yliopisto, Muovi- ja elastomeeritekniikka. Raportti.
8/2008, 2008, 101 s.
-
Heikkilä, T. (toim.).
Muovi- ja elastomeeritekniikan laboratorio; Toimintakertomus 2006-2007. Tampereen teknillinen yliopisto, Muovi- ja elastomeeritekniikka. Raportti.
1/2008, 2008, 33 s.
-
Hoikkanen, M., Luukkonen, A. & Vuorinen, J.
Hybrid products and in-mold integrated structures (HYPRIS) - summary on TUT contribution. Tampereen teknillinen yliopisto, Muovi- ja elastomeeritekniikka. Raportti.
7/2008, 2008, 37 s.
-
Laine, L. & Syrjälä, S.
Determination of polymer melt viscosity using an injection moulding machine with a slit die. Tampereen teknillinen yliopisto, Muovi- ja elastomeeritekniikka. Raportti.
5/2008, 2008, Tampere. 31 s.
-
Luukkonen, A. & Vuorinen, J.
Injection molded stainless steel-plastic hybrids. Tampereen teknillinen yliopisto, Muovi- ja elastomeeritekniikka. Raportti.
4/2008, 2008, 46 s.
-
Neva, T. & Järvelä, P.
Reaktioruiskuvaletun polyamidin (Nyrim®) mineraaliseostus. Tampereen teknillinen yliopisto, Muovi- ja elastomeeritekniikka. Raportti.
6/2008, 2008, 37 s.
-
Salmivalli, S. & Järvelä, P.
Reikäisen levyn ruiskuvalun kehittäminen. Tampereen teknillinen yliopisto, Muovi- ja elastomeeritekniikka. Raportti.
2/2008, 2008, Tampere. 29 s.
-
Salonen, H., Karinen, J. & Mattila, H.
Tekstiili- ja vaatetusteollisuuden kehittämistarpeiden kartoitus.
2008, Helsinki. Tekes. 41 s.
-
Siltanen, S. & Järvelä, P.
Muovien kulumistutkimuksessa käytettävät mittausmenetelmät. Tampereen teknillinen yliopisto, Muovi- ja elastomeeritekniikka. Raportti.
3/2008, 2008, Tampere. 30 s.
-
Talvenmaa, P. & Meinander, H.
Esiselvitys faasimuutosmateriaalien mahdollisuuksista työntekijöiden kylmä- ja lämpöhaittojen vähentämiseksi. Tampereen teknillinen yliopisto, Kuitumateriaalitekniikka.
2008, 22 s.
Books and Reports (Finland)
2007
-
Eteläaho, P. (toim.).
Nanoseostetut polymeerikomposiitit (NASE), projekti. Tampereen teknillinen yliopisto. Muovi- ja elastomeeritekniikka. Raportti.
10/07, 2007, 10, 218 s.
-
Hakala, S. & Vuorinen, J.
Kierrätyshiilikuidulla lujitetut kestomuovit. Tampereen teknillinen yliopisto. Muovi- ja elastomeeritekniikka. Raportti.
06/07, 2007, 79 s.
-
Jönkkäri, I., Hanhi, K. & Järvelä, P.
Ylikriitisen hiilidioksidin käyttö nanokomposiittien valmistuksessa. Tampereen teknillinen yliopisto. Muovi- ja elastomeeritekniikka. Raportti.
07/07, 2007, 43 s.
-
Katajamäki, L. & Järvelä, P.
Muovikotelon valmistus. Tampereen teknillinen yliopisto. Muovi- ja elastomeeritekniikka. Raportti.
05/07, 2007, 38 s.
-
Lahtomäki, R., Järvelä, P. & Vuorinen, J.
Kevytmateriaaliselvitys. Tampereen teknillinen yliopisto. Muovi- ja elastomeeritekniikka. Raportti.
01/07, 2007, 28 s.
-
Lamminmäki, J. & Hanhi, K.
Kumien painatus ja maalaus. Tampereen teknillinen yliopisto. Muovi- ja elastomeeritekniikka. Raportti.
09/07, 2007, 25 s.
-
Lamminmäki, J. & Hanhi, K.
Terveydelle vaaralliset aineet muovi- ja kumiteollisuudessa. Tampereen teknillinen yliopisto. Muovi- ja elastomeeritekniikka. Raportti.
08/07, 2007, 52 s.
-
Niemi, A-M., Mäenpää, M., Myllymaa, M., Räikkönen, J., Andersson, P.H., Järvelä, P. & Vuorinen, J.
Muovi- ja muovikomposiittituotteiden lastuava työstö, projektin loppuraportti. Tampereen teknillinen yliopisto. Muovi- ja elastomeeritekniikka. Raportti.
11/07, 2007, 90 s.
-
Peltonen, H., Sivenius, J., Hanhi, K., Iso-Ketola, P. & Vanhala, J.
Aistivat, älykkäät elastomeerimateriaalit ja tuotteet (KÄLY), projektin loppuraportti (in English). Tampereen teknillinen yliopisto. Muovi- ja elastomeeritekniikka. Raportti.
02/07, 2007, 78 s.
-
Romppanen, K.-M. & Järvelä, P.
Renkaan ominaisuudet ja niiden mittaaminen. Tampereen teknillinen yliopisto. Muovi- ja elastomeeritekniikka. Raportti.
04/07, 2007, 24 s.
-
Sivenius, J. & Hanhi, K.
Sähköäjohtavien ja magneettisten elastien ominaisuuksien karakterisointi. Tampereen teknillinen yliopisto. Muovi- ja elastomeeritekniikka. Raportti.
03/07, 2007, 49 s.
Books and Reports (Finland)
2006
-
Haveri, S. & Hanhi, K.
Kalsiumkarbonaatti polymeerinanokomposiitin täyteaineena. Tampereen teknillinen yliopisto. Muovi- ja elastomeeritekniikka. Raportti.
5/06, 2006, 29 s.
-
Heikkilä, T. (toim.).
Muovi- ja elastomeeritekniikan laboratorio; Toimintakertomus 2005. Tampereen teknillinen yliopisto. Muovi- ja elastomeeritekniikka. Raportti.
1/06, 2006, Tampere. 22 s.
-
Honkanen, H. & Järvelä, P.
Huokoisen materiaalin impregnointi. Tampereen teknillinen yliopisto. Muovi- ja elastomeeritekniikka. Raportti.
6/06, 2006, 29 s.
-
Kilpeläinen, M. & Vuorinen, J.
Pinnoitusmenetelmät. Tampereen teknillinen yliopisto. Muovi- ja elastomeeritekniikka. Raportti.
4/06, 2006, Tampere. 66 s.
-
Lehtonen, J. & Järvelä, P.
Muovien lasertyöstö ja siinä käytettävät materiaalit. Tampereen teknillinen yliopisto. Muovitekniikan laitos. Raportti.
8/06, 2006, 56 s.
-
Myllymaa, M., Villman, V. & Nevalainen, K. (toim.).
Muovialan perustietoutta. Muovi- ja elastomeeritekniikan kesäseminaari, Vammala, 8.-9.6.2006.
2006, 133 s.
-
Nevalainen, K. & Syrjälä, S.
Polymeerisulien käyttäytyminen lähellä jähmettymispistettä. Tampereen teknillinen yliopisto. Muovi- ja elastomeeritekniikka. Raportti.
2/06, 2006, Tampere. 28 s.
-
Niemi, A-M., Myllymaa, M., Järvelä, P. & Laiho, J.
Pienten reikien työstäminen ruiskuvalettuun muovituotteeseen. Tampereen teknillinen yliopisto. Muovi- ja elastomeeritekniikka. Raportti.
3/06, 2006, Tampere. 50 s. + 4 liites.
-
Nykänen, S. & Järvelä, P.
Polymeeripohjainen kosteussulku. Tampereen teknillinen yliopisto. Muovi- ja elastomeeritekniikka. Raportti.
7/06, 2006, Tampere. 20 s.
-
Pellikka, M., Palojoki, V. & Järvelä, P.
Sähköteknisessä laitteessa käytettävän muovimateriaalin valinta. Tampereen teknillinen yliopisto. Muovitekniikan laitos. Raportti.
9/06, 2006, 40 s.
-
Suihkonen, R., Vesanto, H. & Järvelä, P.
Kartongin käyttö pakkaussovelluksissa. Tampereen teknillinen yliopisto. Muovitekniikan laitos. Raportti.
10/06, 2006, 32 s.
Books and Reports (Finland)
2005
-
Eteläaho, P., Nikkilä, M., Tirilä, H-M. & Hanhi, K.
Elastomeerien mahdollisuudet (ELMA), projektin loppuraportti (In English). Tampereen teknillinen korkeakoulu, Muovi- ja elastomeeritekniikka, Raportti.
02/05, 2005, Tampere. 46 s.
-
Heikkilä, T. (toim.).
Muovi- ja elastomeeritekniikan laboratorio; Toimintakertomus 2004. Tampereen teknillinen korkeakoulu, Muovi- ja elastomeeritekniikka, Raportti.
01/05, 2005, Tampere. 18 s.
-
Holmström, E. & Järvelä, P.
Muovituotteen valmistuksen toimintajärjestelmä. Tampereen teknillinen korkeakoulu, Muovi- ja elastomeeritekniikka, Raportti.
04/05, 2005, Tampere. 42 s.
-
Lamminmäki, J., Li, S. & Hanhi, K.
Uusiokumin teollinen hyödyntäminen, projektin loppuraportti (In English). Tampereen teknillinen korkeakoulu, Muovi- ja elastomeeritekniikka, Raportti.
03/05, 2005, Tampere. 80 s.
-
Myllymaa, M. & Järvelä, P.
Seostettujen kestomuovien testaus. Tampereen teknillinen korkeakoulu, Muovi- ja elastomeeritekniikka, Raportti.
05/05, 2005, Tampere. 28 s.
-
Pukkila, M. & Järvelä, P.
Tuotekehitysprojektin nopeuttaminen 3D-CAD -järjestelmän avulla. Tampereen teknillinen korkeakoulu, Muovi- ja elastomeeritekniikka, Raportti.
06/05, 2005, Tampere. 17 s.
-
Siik, K. & Vuorinen, J.
Voitelurasvojen pysyvyys, sekoittuminen ja korroosionesto-ominaisuudet vaativissa olosuhteissa. Tampereen teknillinen korkeakoulu, Muovi- ja elastomeeritekniikka, Raportti.
07/05, 2005, Tampere. 84 s.
Books and Reports (Finland)
2004
-
Fabrin, P. & Vuorinen, J.
Luonnonkuitulujitteinen polypropeeni. Tampereen teknillinen yliopisto, Muovi- ja elastomeeritekniikka, Raportti.
10/04, 2004, Tampere. 45 s.
-
Heikkilä, T. (toim.).
Muovi- ja elastomeeritekniikan laboratorio; Toimintakertomus 2002 - 2003. Tampereen teknillinen yliopisto, Muovi- ja elastomeeritekniikka, Raportti.
02/04, 2004, Tampere. 19 s.
-
Kulmala, J. & Järvelä, P.
Polymeerien käyttäytyminen naarmutuksessa. Tampereen teknillinen yliopisto, Muovi- ja elastomeeritekniikka, Raportti.
05/04, 2004, Tampere. 16 s.
-
Kylmälä, M. (toim.).
Muovialan perustietoutta. Tampereen teknillinen yliopisto, Muovi- ja elastomeeritekniikka, Raportti.
01/04, 2004, Tampere. 114 s.
-
Latvakangas, T. & Järvelä, P.
Ruiskuvaluprosessin kuvaus lineaaristen regressiomallien avulla. Tampereen teknillinen yliopisto, Muovi- ja elastomeeritekniikka, Raportti.
06/04, 2004, Tampere. 44 s.
-
Mikkola, T. & Hanhi, K.
Soft Sensor -menetelmän käyttöönotto kumisekoitteiden viskositeetin hallinnassa. Tampereen teknillinen yliopisto, Muovi- ja elastomeeritekniikka, Raportti.
08/04, 2004, Tampere. 29 s.
-
Pastila, P., Levänen, E., Mäntylä, T., Vallittu, P. & Aro, H.
Finite element analysis in biomechanics: State-of-art dental, hip implant and fracture healing applications. Tampereen teknillinen yliopisto, Materiaaliopin laitos, Raportti.
06/2004, 2004, 64 s.
-
Pirskanen, K., Järvelä, P. & Davidsainen, T.
Lyhyiden sarjojen valmistustekniikat muoveilla. Tampereen teknillinen yliopisto, Muovi- ja elastomeeritekniikka, Raportti.
04/04, 2004, Tampere. 42 s.
-
Poikelispää, M., Kylmälä, M. & Järvelä, P.
Verkon hyödyntäminen opetuksessa. Tampereen teknillinen yliopisto, Muovi- ja elastomeeritekniikka, Raportti.
07/04, 2004, Tampere. 51 s.
-
Sjöblom, J. & Järvelä, P.
Mittausten luotettavuus Nokian Renkaiden alkuvalmistuksessa. Tampereen teknillinen yliopisto, Muovi- ja elastomeeritekniikka, Raportti.
09/04, 2004, Tampere. 53 s.
-
Välipakka, E. & Järvelä, P.
Ruiskuvalukappaleen mikrorakenteen karakterisointi. Tampereen teknillinen yliopisto, Muovi- ja elastomeeritekniikka, Raportti.
03/04, 2004, Tampere. 63 s.
Books and Reports (Finland)
2003
-
Aho, J. & Järvelä, P.
Muovien mikrotyöstö. Tampereen teknillinen yliopisto, Muovi- ja elastomeeritekniikka, Raportti.
2003, 18, 32 s.
-
Ajoviita, T. & Järvelä, P.
Muovien seostaminen nanotäyteaineilla. Tampereen teknillinen yliopisto, Muovi- ja elastomeeritekniikka, Raportti.
2003, 3, 43 s.
-
Fabrin, P. & Järvelä, P.
PVB-muovin uusiokäyttö. Tampereen teknillinen yliopisto, Muovi- ja elastomeeritekniikka, Raportti.
2003, 4, 55 s.
-
Hakkarainen, J., Hietaranta, T., Järvelä, P. & Niemi, A.
Vulkanoitavan kumin ja kestomuovin välinen adheesio. Tampereen teknillinen yliopisto, Muovi- ja elastomeeritekniikka, Raportti.
2003, 1, 38 s.
-
Halkola, H. & Järvelä, P.
Bitumikatteiden kierrätys. Tampereen teknillinen yliopisto, Muovi- ja elastomeeritekniikka, Raportti.
2003, 16, 21 s.
-
Hietaranta, T., Kylmälä, M. & Järvelä, P.
Pienten ja ohutseimämäisten kappaleiden ruiskuvalu (PIKARU), projektin loppuraportti. Tampereen teknillinen yliopisto, Muovi- ja elastomeeritekniikka, Raportti.
2003, 12, 91 s.
-
Ilen, K., Järvelä, P. & Hanhi, K.
Kumien ruiskuvalu. Tampereen teknillinen yliopisto, Muovi- ja elastomeeritekniikka, Raportti.
2003, 14, 71 s.
-
Isomäki, N., Poikelispää, M. & Järvelä, P.
Kestomuovipinnoitettu vaneri. Tampereen teknillinen yliopisto, Muovi- ja elastomeeritekniikka, Raportti.
2003, 17, 50 s.
-
Keski-Äijö, S. & Järvelä, P.
In Mould Decoration. Tampereen teknillinen yliopisto, Muovi- ja elastomeeritekniikka, Raportti.
2003, 15, 39 s.
-
Laaksonen, M. & Järvelä, P.
Kestomuovien laserhitsaus. Tampereen teknillinen yliopisto, Muovi- ja elastomeeritekniikka, Raportti.
2003, 20, 74 s.
-
Lahti, P. & Järvelä, P.
Silmälääketeollisuuden vaatimukset polyeteenille primäärinä pakkausmateriaalina. Tampereen teknillinen yliopisto, Muovi- ja elastomeeritekniikka, Raportti.
2003, 6, 37 s.
-
Lankinen, H-R. & Järvelä, P.
Blenden von PP/PA6.6 mit Doppelschneckenextruder. Tampereen teknillinen yliopisto, Muovi- ja elastomeeritekniikka, Raportti.
2003, 9, 26 s.
-
Mäkelä, J., Juvonen, M. & Järvelä, P.
IMD-tuotteiden puhdistaminen. Tampereen teknillinen yliopisto, Muovi- ja elastomeeritekniikka, Raportti.
2003, 7, 48 s.
-
Marttila, R. & Järvelä, P.
Räjähdysprosessointi. Tampereen teknillinen yliopisto, Muovi- ja elastomeeritekniikka, Raportti.
2003, 5, 11 s.
-
Nurminen, J., & Järvelä, P.
Kaasuavusteinen ruiskuvalu ja sen simulointi. Tampereen teknillinen yliopisto, Muovi- ja elastomeeritekniikka, Raportti.
2003, 2, 35 s.
-
Puhakka, T., Lindgren, T. & Järvelä, P.
PEEK:n ruiskuvalu ja lääketieteen sovellukset. Tampereen teknillinen yliopisto, Muovi- ja elastomeeritekniikka, Raportti.
2003, 11, 44 s.
-
Rajala, S. & Hanhi, K.
Teknisen polyamiditekstiilin liittäminen. Tampereen teknillinen yliopisto, Muovi- ja elastomeeritekniikka, Raportti.
2003, 8, 49 s.
-
Saarelainen, S. & Järvelä, P.
Muoviseoksen kompatibilisointi monikerroskalvoekstruusiossa. Tampereen teknillinen yliopisto, Muovi- ja elastomeeritekniikka, Raportti.
2003, 13, 43 s.
-
Selin, M. & Järvelä, P.
Elintarvikkeiden aktiiviset pakkaukset. Tampereen teknillinen yliopisto, Muovi- ja elastomeeritekniikka, Raportti.
2003, 19, 38 s.
-
Taipale, K., Tuhkanen, E. & Hanhi, K.
Kumisaappaan materiaalit ja kumin pinnan muutokset. Tampereen teknillinen yliopisto, Muovi- ja elastomeeritekniikka, Raportti.
2003, 10, 66 s.
Dissertations
2011
-
Honkanen, Mari.
Injection-molded hybrids - characterization of metal-plastic interfacial features /,
2011.
-
Eteläaho, Pirkko.
Melt-compounded thermoplastic nanocomposites : processing, structure and properties,
2011.
-
Härmä, Veli-Matti.
Reactively synthesized functionally gradient metal matrix composite : micro-structural characteristics, mechanical properties and thermal stability,
2011.
-
Aho, Johanna.
Rheological characterization of polymer melts in shear and extension : measurement reliability and data for practical processing,
2011.
Dissertations
2009
-
Niemi, Kari.
Abrasion wear characteristics of thermal sprayed alumina based coatings /,
2009.
-
Curtze, Sven.
Characterization of the dynamic behavior and microstructure evolution of high strength sheet steels /,
2009.
-
Tuominen, Jari.
Engineering coatings by laser cladding : the study of wear and corrosion properties,
2009.
-
Ferenets, Marju.
Functional optical fibers : organic and hybrid structures,
2009.
-
Zhang, Xiaoxue.
Nanocrystalline functional alumina and boehmite materials : synthesis, characterization and applications,
2009.
Master’s theses
2011
-
Esko, Mikko.
Alipaineinfuusio ja paineinjektio venelaminaattien valmistuksessa : teknistaloudellinen tutkimus,
2011.
-
Hildén, Heidi.
Atomic layer deposition tubes by fibre templates,
2011.
-
Hyvönen, Mira.
Batch to batch consistency in rubber mixing,
2011.
-
Menon, Karan.
Characteristics of Silane Bonding to Stainless Steel,
2011.
-
Peltonen, Claudia.
Comfort properties in multifunctional protective clothing,
2011.
-
Isotahdon, Elisa.
Corrosion behaviour of sintered Nd-Fe-B magnets,
2011.
-
Deniz, Ayse Melis.
Effect of heating rate on the dynamic behavior of age hardened metals,
2011.
-
Gómez-Espinosa Martín, Ana Isabel.
FAST FASHION : a demand-driven supply chain in the fashion industry,
2011.
-
Hakonen, Pasi.
Firearm Suppressors : structures and alternative materials,
2011.
-
Sapkota, Janak.
Influence of Clay Modification on Curing Kinetics of Natural Rubber Nanocomposites,
2011.
-
Magnus, Carl.
Influence of static loading on the long term durability of adhesively bonded metal joints,
2011.
-
Hyytiäinen, Maiju.
Ionijohtavan muovin valmistus,
2011.
-
Kalliokoski, Soili.
Kulumiskestävä läpinäkyvä muovimateriaali kuljetussovelluksiin,
2011.
-
Aaltonen, Pia.
Lujitemuovikappaleen keventäminen rakennetta optimoimalla,
2011.
-
Lehtiniemi, Päivi.
Luonnonkuitupohjaiset lujitteet kelaamalla valmistetuissa komposiiteissa,
2011.
-
Taskinen, Sanna.
Lämpömuovattujen polypropeenituotteiden laadunvalvonnan kehittäminen,
2011.
-
Tamminen, Mikko.
Materiaalitekniikan ja muotoilun yhteiskäyttö kierrätettävyyden parantamiseksi,
2011.
-
Lindroos, Matti.
Mechanical behavior, properties and FE abrasive wear simulation of austenitic manganese steel,
2011.
-
Kinnunen, Ilari.
Messinkisten liukuvalettujen putkien mekaanisten ominaisuuksien parantaminen,
2011.
-
Ahola, Jenni.
Microfoaming of engineering thermoplastics,
2011.
-
Viberg, Ville.
Oikaisukoneen tukikiskojen kulumisen hallinta,
2011.
-
Johansson, Laura.
Polymeeriraaka-aineen kehitys ekstruusiolla valmistettavaan sovellukseen,
2011.
-
Poropudas, Maria.
Polyvinyylikloridin (PVC) kierrätys ja uusiokäyttö,
2011.
-
Mylläri, Ville.
Production of filament yarns made of PEEK,
2011.
-
Bister, Hanna.
Reaktioruiskuvaluprosessin optimointi ja parantaminen,
2011.
-
Hemmilä, Henriikka.
RFID:n pilotointi vaatetusteollisuudessa : case Reima,
2011.
-
Mahanen, Jouni.
Steam-side oxidation of materials for supercritical boilers,
2011.
-
Mostofizadeh, Milad.
A study on the microstructure of Sn-Ag-Cu lead-free solder joint in pulse-heated reflow soldering,
2011.
-
Koivisto, Auroora.
Success factors in socially responsible fashion supply chain,
2011.
-
Balasubramaniam, Sathya Prakash.
Sustainability of cellulosic fibres, and their production systems and technologies,
2011.
-
Komulainen, Johannes.
Suuret kuormaa kantavat hybridi- ja komposiittirakenteet,
2011.
-
Inkinen, Tomi-Tuomas.
Tarttumattomat pinnoitteet tarralaminaatin valmistuslaitteiston pinnoille,
2011.
-
Suominen, Mika.
Termoelastien kitka,
2011.
-
Riihiaho, Reetta.
Testing of whisker growth on zinc coatings,
2011.
-
Tallgren, Salla.
Ultralujien terästen käyttäytyminen suurilla muodonmuutosnopeuksilla matalissa lämpötiloissa,
2011.
-
Lepola, Yrjö.
Valmistustekniikan ja materiaalin valinta muovituotteen valmistuksessa,
2011.
-
Prihti, Tomi.
Wear behaviour of ductile irons in continuous sliding motion,
2011.
Master’s theses
2010
-
Jokinen, Anni Raisa.
3D-ohjelmistot vaatetusteollisuudessa,
2010.
-
Aarnio, Anssi.
Characterization of non-metallic materials for medium voltage cable accessories,
2010.
-
Korpiniemi, Henna.
The effect of runway de-icing chemicals on the corrosion of cadmium coating,
2010.
-
Mikkola, Eveliina.
Forming simulations of a thick stainless steel plate,
2010.
-
Nurmi, Reetta.
Hapettoman kuparin raekoon hallinta,
2010.
-
Hattula, Sanna.
Hiilikuitusubstraatin pinnoitus platinananohiukkasilla,
2010.
-
Hakalahti, Johanna.
Induktio- ja hiiletyskarkaisukerroksen paksuuden määritys Barkhausen-kohinalla,
2010.
-
Kaartinen, Pia.
Kuitukankaiden kehittäminen karjanhoitotuotteeksi : kuivikkeeton karsina,
2010.
-
Kääriäinen, Hilla.
Laadunhallinta jalkinetehtaan tuotannossa,
2010.
-
Marttinen, Nina.
Manufacturing process and material composition of a polymer wood composite,
2010.
-
Mäntymaa, Anne.
Microfluidics in dry-chemistry based immunoassays : Anne Mäntymaa,
2010.
-
Salomaa, Reima.
Mikrosolustus ja kartioekstruusio,
2010.
-
Lahtinen, Oona.
Muovit ja ekotehokkuus,
2010.
-
Ylä-Outinen, Laura.
Neuronal cell cultures on electrospun polylactide fibers,
2010.
-
Miettinen, Susanna.
Oil induced swelling in thermoelastic materials,
2010.
-
Vuorinen, Hanna-Riikka.
Piirilevyn syövytysprosessin muuttuvien parametrien vaikutus syövytystulokseen,
2010.
-
Nevalainen, Liisa.
Plasma enhanced coating of fibre net,
2010.
-
Kortet, Satu.
Polyfenyleenioksidi (PPO) -pohjaisen polymeeriseoksen ominaisuusprofiilin kehitys,
2010.
-
Parviainen, Anna.
Prosessiteollisuuden tarkastusystävälliset lujitemuovirakenteet,
2010.
-
Kauppinen, Mikko.
Ratakiskon elinkaari,
2010.
-
Roivas, Mikko.
Rautavalimon sulaton toimintatapamuutos tuotekantamuutoksen yhteydessä,
2010.
-
Viitala, Pasi.
Rengasmuotin pesu ultraäänellä,
2010.
-
Myllylä, Johanna.
Repeatability and defects of electron beam welded thick copper,
2010.
-
Vierimaa, Petri.
Ruiskuvaletut alumiini-muovi -hybridit,
2010.
-
Vanhanen, Satu.
Sample pre-processing in a microfluidic cartridge,
2010.
-
Lehtinen, Susanna.
Sarjapituuden optimointi,
2010.
-
Jutila, Hanna.
Sinkkikerroksen vaikutus teräslevyn emissiviteettiin tulipalossa,
2010.
-
Salmi, Jesse.
Solution strengthened ferritic ductile iron : foundry process, machinability and tool wear,
2010.
-
Jokela, Iina.
Tekstiilien käsittely normaalipaineplasmalla,
2010.
-
Mettälä, Arttu.
Termisen ruiskutuksen tuotantosolun vaatimukset ja toteuttaminen,
2010.
-
Seppä, Tommi.
The effect of different nanofillers on properties and mixing of ethylene propylene diene rubber,
2010.
-
Modenius, Lasse.
Welding of steel to ferritic ductile iron,
2010.
Master’s theses
2009
-
Majuri, Jarl-Erik.
Adiabaattinen ruiskuvalu,
2009.
-
Lämsä, Kaisa.
Cladonia Stellaris jäkälän valkaisu ja värjäysmenetelmien kehittäminen,
2009.
-
Mallat-Ahola, Sari.
Ecoefficient surface materials for public premises,
2009.
-
Villilä, Tomi.
The effect of molding conditions on the pin-hole formation on plastic film,
2009.
-
Naula-Iltanen, Annamaija.
FTIR-spektroskopia polymeerien vanhenemisen tutkimuksessa,
2009.
-
Juutinen, Samu.
Injection molding of inherently dissipative polypropylene,
2009.
-
Plyhm, Tiia.
Kestävän elastomeerin valmistus,
2009.
-
Isoaho, Seija.
Materials for piping used in arctic environment,
2009.
-
Saarinen, Jarmo.
Monitoimipaarien kehittäminen,
2009.
-
Koivisto, Ida.
Paloturvalliset sekoitekuitukankaat vuodetuotteissa,
2009.
-
Saarela, Juho.
Pelkistävien olosuhteiden vaikutus tulistinpintojen alkalisulasuolakorroosioon,
2009.
-
Peltola, Maarit.
Preparation of microfibrillated cellulose,
2009.
-
Keisala, Mari.
Silikonipolymeerien tekninen käyttö,
2009.
-
Östman, Kauko.
Sintering of silver nanoparticle inks for printable electronics,
2009.
-
Ratia, Vilma.
Soldering of Sunwire,
2009.
-
Renvall, Susanna.
Structural analysis of constructions based on engineering plastics,
2009.
-
Simola, Heidi.
Toiminnanohjausjärjestelmän kehittäminen,
2009.
-
Innanmaa, Riikka.
Toimintajärjestelmän käytettävyyden kehittäminen,
2009.
-
Hallila, Tiina.
Uudet biopohjaiset kuidut muovien lujitteena,
2009.
Master’s theses
2008
-
Eerola, Anni-Mari.
Ajoneuvovalaisimien tiiveystestausmenetelmien vertailu ja kehitys,
2008.
-
Santa-Aho, Suvi.
Characterization of gear grinding burns by multiparameter noise measurements,
2008.
-
Laine, Laura.
Determination of polymer melt viscosity using an injection moulding machine with a slit die,
2008.
-
Alanne, Anna.
The effect of washing process and detergents on properties of specific garments,
2008.
-
Isakov, Matti.
Effects of strain rate and temperature on the tensile properties of austenitic stainless sheet steels,
2008.
-
Siltanen, Sanna.
Evaluation of a wear test apparatus,
2008.
-
Kähärä, Anu.
Fibre and particle detachment from surfaces,
2008.
-
Mäkinen, Terhi.
Hitsauksen laadunhallinta ja hitsauslaatuun vaikuttavat tekijät : diplomtyö,
2008.
-
Holma, Sini.
Hydrofobisen selluloosan hyödyntäminen kuitukomposiiteissa,
2008.
-
Luukkonen, Asta.
Injection molded stainless steel - plastic hybrids,
2008.
-
Rupponen, Mikko.
Kaksivaiheinen laserpinnoitus,
2008.
-
Berg, Tommi.
Kelauskoneen modernisointi,
2008.
-
Tuominen, Mira.
Kimmoisen materiaalin hyödyntäminen liikuntasaumattomissa silloissa,
2008.
-
Kallionpää, Santeri.
Korkealujuuksiset sinkityt DP-teräkset,
2008.
-
Mäkinen, Juho.
Korkeamolybdeenisen martensiittisen ruostumattoman teräksen mekaaniset ominaisuudet ja korroosionkesto vaativissa merivesiolosuhteissa,
2008.
-
Lähteenmäki, Mirva.
Kuonapuhtauden vaikutus hiiletysteräksen väsymislujuuteen,
2008.
-
Uusitalo, Minna.
Lietevalulla valmistettavan keraamisen kiekkosuodattimen laatan ominaisuuksien ja koostumuksen optimointi,
2008.
-
Hyvärinen, Leo.
Mangaani-kobolttispinellien syntetisointi bipolaarilevyjen suojapinnoittemateriaaliksi,
2008.
-
Partanen, Merja.
Metallihakasaumaisten nauhasuodatin- ja rumpukangastuotteiden hallinta,
2008.
-
Salomaa, Turo.
Mikrorakenteen vaikutus teräksen kylmätyssättävyyteen,
2008.
-
Cai, Wei.
Oxidation behaviour of zirconium cladding alloys in high temperature high pressure aqueous environments,
2008.
-
Mikkolainen, Kirsi.
PLD-menetelmällä valmistettujen ohutkalvojen kulutustestaus,
2008.
-
Hermawan, Edy.
Preparation of cellulose particles by using cellulose alkaline solution,
2008.
-
Minkkinen, Jussi.
Rakenneputken ja avoprofiilin nurkka-alueen valmistuksen raja-arvot,
2008.
-
Neva, Tiina.
Reaktioruiskuvaletun polyamidin (Nyrim®) mineraaliseostus,
2008.
-
Aho, Jenni.
Sintering of Ag nano particle ink under compressed gas,
2008.
-
Laine, Marianna.
Standardinostinten kustannustehokas korroosionsuojaus ilmastollista korroosiota vastaan,
2008.
-
Turto, Kirsi.
Sulasekoitettu nanoseostettu polykarbonaatti,
2008.
-
Saastamoinen, Päivi.
Surface modification of synthetic fibres,
2008.
-
Kyynäräinen, Niina.
Sähköstaattisen kuidutussuuttimen toiminta ja kehitys,
2008.
-
Kaappa, Emma.
Tekstiilien liitos- ja leikkuuteknologiat elektroniikan suojaamisessa,
2008.
-
Keskinen, Aki.
Valutuotteiden laadun parantaminen,
2008.
-
Pitkäranta, Sanni.
Ympäristöopas metallialan pienyrittäjille,
2008.
Master’s theses
2007
-
Metsäjoki, Jarkko.
Aluminoitujen ja pinnoittamattomien ferriittis-martensiittisten voimalaitosterästen korkean lämpötilan hapettuminen,
2007.
-
Kivirinta, Susanna.
Ferriittisen 17 % Cr sisältävän ruostumattoman teräksen herkistymisasteen määrittäminen,
2007.
-
Ahonen, Kristiina.
Hienosukkatuotannon viimeistysprosessin hallinta,
2007.
-
Ahvonen, Mirva.
Keraamisten pintojen laserprosessointi,
2007.
-
Hakala, Sanni.
Kierrätyshiilikuidulla lujitetut kestomuovit,
2007.
-
Kuronen, Hanna.
Lujitemuovijätteen karakterisointi kierrätyksen ja uusiokäytön kannalta,
2007.
-
Katajamäki, Johanna.
Muovikotelon valmistus,
2007.
-
Nieminen, Mikko.
Pulverimetallurgisesti valmistetut metallivaahdot ja vaahtopohjaiset komponentit,
2007.
-
Kamppuri, Taina.
Regenerated cellulosic fibre for hydroentangled nonwovens from enzymatically treated pulp,
2007.
-
Jussila, Kirsi.
Suomalaisten talvipukeutuminen ja sen merkitys selviytymiseen ja suoriutumiseen,
2007.
-
Santavirta, Sanni.
Taipuisan elektroniikan suojaus elastomeerimateriaalilla,
2007.
-
Kokkonen, Jari.
Teräsohutlevyjen mekaanisten ominaisuuksien määrittäminen ja mallintaminen suurilla muodonmuutosnopeuksilla,
2007.
-
Larjosuo, Henri.
Valssilangan pintavikojen vaikutus kylmätyssättävyyteen,
2007.
-
Riipinen, Elena.
Vesihydrauliikan komponenttien kestävyys vesivoiteluolosuhteissa,
2007.
-
Jönkkäri, Ilari.
Ylikriittisen hiilidioksidin käyttö nanokomposiittien valmistuksessa,
2007.
Master’s theses
2006
-
Haider, Waseem.
Comparative microstructural study of tin lead and lead free solder joints,
2006.
-
Kallio, Pentti.
Kestomuovin seostus,
2006.
-
Hernández, Eduardo.
Material processing with supercritical CO₂ : Masters Thesis,
2006.
-
Kumpulainen, Susanna.
Paryleenipinnoitus ja laiteparametrien optimointi,
2006.
-
Aho, Anne-Mari.
Ruostumattoman teräksen selektiivinen pinnoitus,
2006.
-
Alaranta, Maria.
Teknisten tekstiilien puhdistaminen,
2006.
-
Hämäläinen, Mervi.
Virtauspintamateriaalien karakterisointi,
2006.
Master’s theses
2005
-
Katila, Markus.
Ammoniumsulfaattikiteyttämätön korroosion hallinta,
2005.
-
Villman, Vesa.
Effects of particulate fillers on a thermoset resin,
2005.
-
Karjalainen, Aki.
Kapasitiivinen voima-anturi polymeeripinnoitteisten telojen puristuspainemittauksiin,
2005.
-
Suutala, Jyrki.
Laseravusteinen terminen ruiskutus,
2005.
-
Zhang, Xiaoxue.
Micropatterning on functional surface : Master's thesis,
2005.
-
Ylänen, Johanna.
Termisesti ruiskutettujen keraamipinnoitteiden ominaisuudet,
2005.
-
Nevalainen, Katri.
Viscosity of polymer melts at low temperatures and shear rates,
2005.
-
Siik, Krista.
Voitelurasvojen pysyvyys, sekoittuminen ja korroosionesto-ominaisuudet vaativissa olosuhteissa,
2005.
Master’s theses
2004
-
Ajoviita, Tommi.
Compounding of specialty plastics with nanofillers,
2004.
-
Haapanen, Ulla.
Cu(Ag)-metalliseoksen hapettumisen ja segregaation pinta-analyyttinen tutkimus XPS-menetelmällä,
2004.
-
Eronen, Ville.
Microwear phenomena in thermally sprayed hard coatings,
2004.
-
Laaksonen, Mikko.
Polykarbonaatin laserhitsaus,
2004.
-
Latvakangas, Timo.
Ruiskuvaluprosessin kuvaus lineaaristen regressiomallien avulla,
2004.
-
Aalto, Taru.
Testing methods for the corrosion behaviour of adhesive bonded sandwich structures,
2004.
Master’s theses
2003
-
Halkola, Hanna-Mari.
Bitumikatteiden kierrätys,
2003.
-
Harrer, Robert.
Influence of nanofillers on the properties of natural rubber compounds containing devulcanized rubber : Masterthesis,
2003.
-
Iltanen, Sari.
Luunkaltaisen avohuokoisen alumiinioksidin valmistaminen,
2003.
-
Oksala, Tiina.
Pinnoitteiden kemiallinen kestävyys,
2003.
-
Ilén, Kimmo.
Silikonin kaksikomponenttiruiskuvalu,
2003.
-
Gomes, Marta Virgínia Pinto.
The effect or pressure on the flow properties : M.Sc. Thesis,
2003.
-
Lehtimäki, Pasi.
Uuniluukkujen lämpösokinkestävyys,
2003.
-
Marttila, Reetta.
Vedenalaiset räjäytykset - Emulsioräjähteen energian mittaaminen,
2003.