Component Cleanliness Laboratory


The component cleanliness laboratory is a new investment in IHA. The cleanliness of the components is researched in pressurized semi-clean room where the coming air is filtered. The most important research equipment there are component cleanliness cabinets for particle extraction from the studied component to membrane filters and an automatic microscope with application oriented software for the analysis of the membranes. The research is carried out according to standard ISO 16232 Road vehicles – Cleanliness of components of fluid circuits. In addition, it is possible to analyse oil samples according to standards ISO 4406 and SAE AS4059E with the automatic microscope.

Component Cleanliness Cabinets
 

  • Model:
 Hydac CTU 1200 Pall PCC-41
  • Cabinet Dimensions [mm] (W x L x H):
 1000 x 1100 x 1800 1470 x 950 x 2530
  • Analysis Chamber Dimensions [mm] (W x L x H):
 800 x 650 x 550 1000 x 570 x 680
  • Extraction methods:
 Pressure rinsing
Ultrasonic bath
Flushing		 Pressure rinsing
  • Analysis method:
 Membrane filter Membrane filter

 

Hydac CTU 1200 Pall PCC-41

 

Automatic Microscope System

 

  • Microscope: Carl Zeiss AxioImager M2m
  • Objectives: 25x, 50x, 100x, 200x
  • Contrast methods: Brightfield, Darkfield, Polarisation, DIC
  • Camera: Carl Zeiss AxioCam ICc1
  • Software: Carl Zeiss AxioVision
  • Standards: ISO 16232, ISO 4406, SAE AS4059E

 

      


Päivittäjä: Uusi-Heikkilä Janne, 21.06.2011 13:55.
Asiasanat: tiede ja tutkimus, palvelut ja yhteistyö
Sivun alkuun Palaute tästä sivusta