Refereed Journal Articles int'l
2012
Refereed Journal Articles int'l
2011
-
Björninen, Toni; Lauri, Mikko; Ukkonen, Leena; Ritala, Risto; Elsherbeni, Atef Z; Sydänheimo, Lauri.
Wireless Measurement of RFID IC Impedance. IEEE Transactions on Instrumentation and Measurement.
60, 2011, 9, 3194-3206. http://dx.doi.org/10.1109/TIM.2011.2123190.
-
Eerola, Tuomas; Lensu, Lasse; Kämäräinen, Joni-Kristian; Leisti, Tuomas; Ritala, Risto; Nyman, Göte; Kälviäinen, Heikki.
Bayesian network model of overall print quality: Construction and structural optimisation. Pattern Recognition Letters.
32, 2011, 11, 1558-1566. http://dx.doi.org/10.1016/j.patrec.2011.04.006.
-
Hästbacka, David; Vepsäläinen, Timo; Kuikka, Seppo.
Model-driven development of industrial process control applications. Journal of Systems and Software.
84, 2011, 7, 1100-1113. http://dx.doi.org/10.1016/j.jss.2011.01.063.
-
Helin, Tomi; Koivisto, Hannu.
The GARCH-Fuzzy Density method for density forecasting. Applied Soft Computing.
11, 2011, 6, 4212-4225. http://dx.doi.org/10.1016/j.asoc.2011.03.015.
-
Huovinen, Mikko.
Technology advances open up new possibilities in industrial process management. International Review of Automatic Control (IREACO).
4, 2011, 1, 133-143.
-
Kumpulainen, Pekka; Mettänen, Marja; Lauri, Mikko; Ihalainen, Heimo.
Relating halftone dot quality to paper surface topography. Neural Computing & Applications.
20, 2011, 6, 803-813. http://dx.doi.org/10.1007/s00521-010-0497-y.
-
Mäntymaa, Anne; Halme, Jussi; Välimaa, Lasse; Kallio, Pasi.
The Effects of Laser Welding on the Heterogeneous Immunoassay Performance in a Microfluidic Cartridge. Biomicrofluidics.
5, 2011, 4, 046504.1-11. http://dx.doi.org/10.1063/1.3668261.
-
Mustajoki, Jyri.
Effects of imprecise weighting in hierarchical preference programming. European Journal of Operational Research.
218, 2011, 1, 193-201. http://dx.doi.org/10.1016/j.ejor.2011.10.033.
-
Mustajoki, Jyri; Saarikoski, Heli; Marttunen, Mika; Ahtikoski, Anssi; Hallikainen, Ville; Helle, Timo; Hyppönen, Mikko; Jokinen, Mikko; Naskali, Arto; Tuulentie, Seija; Varmola, Martti; Vatanen, Eero; Ylisirniö, Anna-Liisa.
Use of decision analysis interviews to support the sustainable use of the forests in Finnish Upper Lapland. Journal of Environmental Management.
92, 2011, 6, 1550-1563. http://dx.doi.org/10.1016/j.jenvman.2011.01.007.
-
Rantanen, Ville; Vanhala, Toni; Tuisku, Outi; Niemenlehto, Pekka-Henrik; Verho, Jarmo; Surakka, Veikko; Juhola, Martti; Lekkala, Jukka.
A wearable, wireless gaze tracker with integrated selection command source for human-computer interaction. IEEE Transactions on Information Technology in Biomedicine.
15, 2011, 5, 795-801. http://dx.doi.org/10.1109/TITB.2011.2158321.
-
Roinila, Tomi; Huovinen, Mikko; Vilkko, Matti.
Application possibilities of non parametric identification techniques in on-line process monitoring. International Review of Automatic Control (IREACO).
4, 2011, 1, 40-46.
-
Ronkanen, Pekka; Kallio, Pasi; Vilkko, Matti; Koivo, Heikki N.
Displacement control of piezoelectric actuators using current and voltage. IEEE/ASME Transactions on Mechatronics.
16, 2011, 1, 160-166. http://dx.doi.org/10.1109/TMECH.2009.2037914.
-
Ropponen, Aino; Ritala, Risto; Pistikopoulos, Efstratios N.
Optimization issues of the broke management system in papermaking. Computers & Chemical Engineering.
35, 2011, 11, 2510-2520. http://dx.doi.org/10.1016/j.compchemeng.2010.12.012.
-
Ryynänen, Tomi; Kujala, Ville; Ylä-Outinen, Laura; Korhonen, Ismo; Tanskanen, Jarno M.A.; Kauppinen, Pasi; Aalto-Setälä, Katriina; Hyttinen, Jari; Kerkelä, Erja; Narkilahti, Susanna; Lekkala, Jukka.
All Titanium Microelectrode Array for Field Potential Measurements from Neurons and Cardiomyocytes-A Feasibility Study. Micromachines.
2, 2011, MDPI AG. 394-409. http://dx.doi.org/10.3390/mi2040394.
-
Salpavaara, Timo; Verho, Jarmo; Kumpulainen, Pekka; Lekkala, Jukka.
Readout methods for an inductively coupled resonance sensor used in pressure garment application. Sensors and Actuators, A: Physical.
172, 2011, 1, 109-116. http://dx.doi.org/10.1016/j.sna.2011.02.051.
-
Takalo, Rijo; Hytti, Heli; Ihalainen, Heimo.
Adaptive autoregressive model for reduction of poisson noise in scintigraphic images. Journal of Nuclear Medicine Technology.
39, 2011, 1, 19-26. http://dx.doi.org/10.2967/jnmt.110.077081.
Refereed Journal Articles int'l
2010
-
Hahto, Antti; Mattila, Jouni; Koivisto, Hannu.
Automated object locator in a forest forwarder. Applied Artificial Intelligence
24, 2010, 7, 711-721. http://dx.doi.org/10.1080/08839514.2010.499501.
-
Jokinen, Heikki; Konkarikoski, Kimmo; Pulkkinen, Petteri; Ritala, Risto.
Operations´ decision making under uncertainty: case studies on papermaking. Mathematical and Computer Modelling of Dynamical Systems.
15, 2010, 5, Taylor & Francis. 435-452. http://dx.doi.org/10.1080/13873950903375429.
-
Jokinen, Heikki; Ritala, Risto.
Value of measurement information: A simple case study on grade change decisions. Measurement.
43, 2010, 1, 122-134. http://dx.doi.org/10.1016/j.measurement.2009.08.008.
-
Junnila, Sakari; Kailanto, Harri; Merilahti, Juho; Vainio, Antti-Matti; Vehkaoja, Antti; Zakrzewski, Mari; Hyttinen, Jari.
Wireless, multipurpose in-home health monitoring platform: Two case trials. IEEE Transactions on Information Technology in Biomedicine.
14, 2010, 2, 447-455. http://dx.doi.org/10.1109/TITB.2009.2037615.
-
Lucander,M.; Asikainen, S.; Pöhler,T.; Saharinen, E.; Björkqvist, Tomas.
Fatigue treatment of wood by high-frequency cyclic loading. Journal of Pulp and Paper Science.
35, 2010, 3-4, 81-85.
-
Mettänen, Marja.
Methods for measuring and predicting the printability of paper. Nordic Pulp & Paper Research Journal.
25, 2010, 3, 391-404.
-
Pulkkinen, Pietari; Koivisto, Hannu.
A dynamically constrained multiobjective genetic fuzzy system for regression problems. IEEE Transactions on Fuzzy Systems.
18, 2010, 1, 161-177. http://dx.doi.org/10.1109/TFUZZ.2009.2038712.
-
Rantanen, Ville; Niemenlehto, Pekka-Henrik; Verho, Jarmo; Lekkala, Jukka.
Capacitive facial movement detection for human-computer interaction to click by frowning and lifting eyebrows. Medical & Biological Engineering & Computing.
48, 2010, 1, 39-47. http://dx.doi.org/10.1007/s11517-009-0565-6.
-
Rauhamäki, Jari; Laitinen, Outi; Sierla, Seppo; Kuikka, Seppo.
The role of user guidance in the industrial adoption of MDE approach. EASST Electronic Communications.
10, 2010, 1-12.
-
Riistama, Jarno; Aittokallio, Eemeli; Verho, Jarmo; Lekkala, Jukka.
Totally passive wireless biopotential measurement sensor by utilizing inductively coupled resonance circuits. Sensors and Actuators A: Physical.
157, 2010, 2, Elsevier. 313-321. http://dx.doi.org/10.1016/j.sna.2009.11.038.
-
Roinila Tomi; Taskinen Aki; Vilkko Matti.
Rapid frequency response measurement of power conversion products with coherence-based confidence analysis. World Academy of Science, Engineering and Technology.
2010, 69, 678-683.
-
Roinila Tomi; Taskinen Aki; Vilkko Matti.
Review of binary sequences applied in frequency-response measurements of switched-mode converters. World Academy of Science, Engineering and Technology.
6, 2010, 70, 523-530.
-
Roinila, Tomi; Vilkko, Matti; Suntio, Teuvo.
Frequency-response measurement of switched-mode power supplies in the presence of nonlinear distortions. IEEE Transactions on Power Electronics.
25, 2010, 7-8, 2179-2187. http://dx.doi.org/10.1109/TPEL.2010.2043688.
-
Ropponen, Aino; Ritala, Risto.
Optimizing the design and operation of measurements for control: Dynamic optimization approach. Measurement.
43, 2010, 1, 9-20. http://dx.doi.org/10.1016/j.measurement.2009.02.007.
-
Tervo, Kalevi; Palmroth, Lauri; Koivo, Heikki.
Skill evaluation of human operators in partly automated mobile working machines. IEEE Transactions on Automation Science and Engineering.
7, 2010, 1, 133-142. http://dx.doi.org/10.1109/TASE.2009.2025364.
-
Vilkko, Matti; Roinila, Tomi; Suntio, Teuvo.
Fast simulated frequency response measurement for switched-mode power circuits. EPE Journal.
20, 2010, 3, 14-20.
-
Vilkko, Matti; Taskinen, Aki; Roinila, Tomi.
Identification of fractional dynamics of viscous elastic material. World Academy of Science, Engineering and Technology.
6, 2010, 70, 517-522.
Refereed Journal Articles int'l
2009
-
Blanco, A.; Dahlquist, E.; Kappen. J.; Manninen, J.; Negro, C.; Ritala, Risto.
Use of modelling and simulation in the pulp and paper industry. Mathematical and Computer Modeling of Dynamical Systems.
15, 2009, 5, Taylor & Francis. 409-423. http://dx.doi.org/10.1080/13873950903375387.
-
Heinilä, H., Riistama, J., Heino, P. & Lekkala, J.
Low cost miniaturization of an implantable prototype. Circuit World.
35, 2009, 1, 34-40. http://dx.doi.org/10.1108/03056120910928716.
-
Joro, R., Lääperi, A.-L., Dastidar, P., Järvenpää, R., Kuukasjärvi, T., Toivonen, T., Saaristo, R. & Soimakallio, S.
A dynamic infrared imaging-based diagnostic process for breast cancer. Acta Radiologica.
50, 2009, 8, p. 860-869. http://dx.doi.org/10.1080/02841850903095377.
-
Kärki, S. & Lekkala, J.
A new method to measure heart rate with EMFi and PVDF materials. Journal of Medical Engineering & Technology.
33, 2009, 7, pp. 551-558. http://dx.doi.org/10.1080/03091900903067424.
-
Kärki, S., Lekkala, J., Kuokkanen, H. & Halttunen, J.
Development of a piezoelectric polymer film sensor for plantar normal and shear stress measurements. Sensors and Actuators A: Physical.
154, 2009, 1, p. 57-64. http://dx.doi.org/10.1016/j.sna.2009.07.010.
-
Ritala, R.
Value of measurement frequency and accuracy in control of a stochastic bistable system. IET Control Theory & Applications.
3, 2009, 7, pp. 789-798. http://dx.doi.org/10.1049/iet-cta.2007.0489.
-
Roinila, T., Helin, T., Vilkko, M., Suntio, T. & Koivisto, H.
Circular correlation based identification of switching power converter with uncertainty analysis using fuzzy density approach. Simulation Modelling Practice and Theory.
17, 2009, 6, 1043-1058. http://dx.doi.org/10.1016/j.simpat.2009.03.006.
-
Roinila, T., Vilkko, M. & Suntio, T.
Fast loop gain measurement of switched mode converter using binary signal with specified Fourier amplitude spectrum. IEEE Transactions on Power Electronics.
24, 2009, 12, pp. 2746-2755. http://dx.doi.org/10.1109/TPEL.2009.2027706.
-
Savia, M. & Koivo, H.
Contact micromanipulation - Survey of strategies. IEEE - ASME Transactions on Mechatronics.
14, 2009, 4, 504-514. http://dx.doi.org/10.1109/TMECH.2008.2011986.
Refereed Journal Articles int'l
2008
-
Heiskanen, V., Marjanen, K. & Kallio, P.
Machine vision based measurement of dynamic contact angles in microchannel flows. Journal of Bionic Engineering.
5, 2008, 4, pp. 282-290.
-
Jokinen, H.
Detection of dynamically inconsistent samples in measured signals. Measurement.
41, 2008, 2, p. 144-150. http://dx.doi.org/10.1016/j.measurement.2006.02.007.
-
Joro, R., Lääperi, A.-L., Dastidar, P., Soimakallio, S., Kuukasjärvi, T., Toivonen, T., Saaristo, R. & Järvenpää, R.
Imaging of breast cancer with mid- and long-wave infrared camera. Journal of Medical Engineering & Technology.
32, 2008, 3, p. 189-197. http://dx.doi.org/10.1080/03091900701234358.
-
Joro, R., Lääperi, A.-L., Soimakallio, S., Järvenpää, R., Kuukasjärvi, T., Toivonen, T., Saaristo, R. & Dastidar, P.
Dynamic infrared imaging in identification of breast cancer tissue with combined image processing and frequency analysis. Journal of Medical Engineering & Technology.
32, 2008, 4, p. 325-334. http://dx.doi.org/10.1080/03091900701541240.
-
Kumpulainen, P. & Hätönen, K.
Local anomaly detection for mobile network monitoring. Information Sciences, Informatics and Computer Science Intelligent Systems Applications.
178, 2008, 20, p. 3840-3859. http://dx.doi.org/10.1016/j.ins.2008.05.038.
-
Mettänen, M., Ihalainen, H. & Ritala, R.
Alignment and statistical analysis of 2D small-scale paper property maps. Appita Journal: Journal of the Technical Association of the Australian and New Zealand Pulp and Paper Industry.
61, 2008, 4, p. 323-330.
-
Pulkkinen, P.
Decision making under uncertainty: case studies on TMP production scheduling. Paperi ja Puu - Paper and Timber.
90, 2008, 3, p. 34-38.
-
Pulkkinen, P., Hytönen, J. & Koivisto, H.
Developing a bioaerosol detector using hybrid genetic fuzzy systems. Engineering Applications of Artificial Intelligence.
21, 2008, 8, pp. 1330-1346. http://dx.doi.org/10.1016/j.engappai.2008.01.006.
-
Pulkkinen, P. & Koivisto, H.
Fuzzy classifier identification using decision tree and multiobjective evolutionary algorithms. International Journal of Approximate Reasoning.
48, 2008, 2, pp. 526-543. http://dx.doi.org/10.1016/j.ijar.2007.10.004.
-
Pulkkinen, P., Laurikkala, M., Ropponen, A. & Koivisto, H.
Quality management in GPRS networks with fuzzy case-based reasoning. Knowledge-Based Systems.
21, 2008, 5, pp. 421-428. http://dx.doi.org/10.1016/j.knosys.2008.03.003.
-
Pulkkinen, P. & Ritala, R.
TMP production scheduling under uncertainty: Methodology and case studies. Chemical Engineering and Processing: Process Intensification.
47, 2008, 9-10, p. 1492-1503. http://dx.doi.org/10.1016/j.cep.2007.06.017.
Refereed Journal Articles int'l
2007
-
Gren, J., Konkarikoski, K. & Ritala, R.
Optimal measurement policy for decision making: a case study of quality management based on laboratory measurements. Metrology and Measurement Systems. Metrologia I Systemy Pomiarowe.
14, 2007, 1, p. 165-180.
-
Kallio, P., Ritala, T., Lukkari, M. & Kuikka, S.
Injection guidance system for cellular microinjections. International Journal of Robotics Research.
26, 2007, 11-12, pp. 1303-1313. http://dx.doi.org/10.1177/0278364907084985.
-
Pulkkinen, P. & Koivisto, H.
Identification of interpretable and accurate fuzzy classifiers and function estimators with hybrid methods. Applied Soft Computing.
7, 2007, 2, pp. 520-533. http://dx.doi.org/10.1016/j.asoc.2006.11.001.
-
Rajala, M. & Ritala, R.
A method to estimate the graph structure for a large MRF model. Lecture notes in computer science.
4669, 2007, p. 836-849.
-
Riistama, J., Väisänen, J., Heinisuo, S., Harjunpää, H., Arra, S., Kokko, K., Mäntylä, M., Kaihilahti, J., Heino, P., Kellomäki, M., Vainio, O., Vanhala, J., Lekkala, J. & Hyttinen, J.
Wireless and inductively powered implant for measuring electrocardiogram. Medical & Biological Engineering & Computing (MBEC).
45, 2007, 12, p. 1163-1174. http://dx.doi.org/10.1007/s11517-007-0264-0.
-
Savioja, P., Salo, L., Laitinen, O., Hästbacka, D., Juden, T. & Valve, V.
Defining a work support and training tool for automation design engineers. Lecture notes in artificial intelligence.
4562, 2007, pp. 174-183.
-
Suntio, T., Hankaniemi, M. & Roinila, T.
Dynamical modelling of peak-current-mode-controlled converter in continuous conduction mode. Simulation Modelling Practice and Theory.
15, 2007, 10, pp. 1321-1337.
Refereed Journal Articles int'l
2006
-
Annala, J., Moisanen, P. & Ritala, R.
Dynamic monitoring of finishing efficiency: a simulation-based analysis. Paperi ja Puu - Paper and Timber.
88, 2006, 3, p. 163-168.
-
Blanco, A., Dahlquist, E., Kappen, J. Manninen, J., Negro, C. & Ritala, R.
Modelling and simulation in pulp and paper industry. Current state and future perspectives. Cellulose Chemistry and Technology.
40, 2006, 3-4, p. 249-258.
-
Hytti, H., Takalo, R. & Ihalainen, H.
Tutorial on multivariate autoregressive modelling. Journal of Clinical Monitoring and Computing.
2006, 8 p.
-
Ihalainen, H., Latva-Käyrä, K. & Ritala, R.
Dynamic validation of on-line measurements: A probabilistic analysis. Measurement.
39, 2006, 4, p. 335-351.
-
Kallio, P. & Kuncova-Kallio, J.
Capillary pressure microinjection 0f living adherent cells: challenges in automation. Journal of Micromechatronics.
3, 2006, 3-4, pp. 189-220.
-
Mäkilä, P.
A note on the Laplace transform method for initial value problems. International Journal of Control.
79, 2006, 1, pp. 36-41.
-
Mäkilä, P.
LTI approximation of nonlinear systems via signal distribution theory. Automatica.
42, 2006, pp. 917-928.
-
Mäkilä, P.
On robustness in control and LTI identification : near-linearity and non-conic uncertainty. Automatica.
42, 2006, pp. 601-612.
-
Mäkilä, P.
Robust input-output stabilization on Z for persistent signals. Automatica.
42, 2006, 3, pp. 1453-146.
-
Mäkilä, P. & Partington, J. R.
A two-operator approach to robust stabilization of linear systems on R. International Journal of Control.
79, 2006, 9, pp. 1026-1038.
-
Pajula, E. & Ritala, R.
Measurement uncertainty in integrated control and process design - A case study. Chemical Engineering and Processing.
45, 2006, 4, p. 312-322.
-
Savia, M., Koivo, H.,N. & Zhou, Q.
Evaluation of adhesive forces between arbitrary objects for micromanipulation. Journal of Micromechanics.
3, 2006, 3-4, pp. 221-238.
-
Takalo, R., Hytti. H. & Ihalainen, H.
Tutorial on univariate autoregressive spectral analysis. Journal of Clinical Monitoring and Computing.
19, 2006, 6, p. 401-410.
Refereed Journal Articles int'l
2005
-
Kuncova-Kallio, J. & Kallio, P.
Lab automation in cultivation of adherent cells. IEEE transactions on automation science and engineering.
3, 2005, 2, pp. 177-186.
-
Maijala, J., Keitamo, J.-P., Grön, J. & Kettunen, L.
Modelling and simulation of the electric field and particle trajectories in simultaneous two-sided dry surface treatment of paper. Surface & Coatings Technology.
195, 2005, pp. 41-53. http://dx.doi.org/10.1016/j.surfcoat.2004.06.002.
-
Mäkilä, P.
Focusing on unbounded input-output models on Z. International Journal on Control.
78, 2005, 9, pp. 613-628.
-
Partington, J. R. & Mäkilä, P.
Rational approximation of distributed-delay controllers. International Journal of Control.
78, 2005, 16, pp. 1295-1301.
-
Putkisto, K., Maijala, J., Grön, J. & Rigdahl, M.
An approach to the dry-state preparation of coating particles for use in dry surface treatment of paper. Progress in Organic Coatings.
51, 2005, pp. 257-266.
Refereed Journal Articles int'l
2004
-
Maijala, J., Putkisto, K. & Grön, J.
Coating layer formation in dry surface treatment of paper subtrates. TAPPI Journal.
3, 2004, 4, s. 1-5.
-
Maijala, J., Putkisto, K. & Grön, J.
Effecct of coating powder composition and process conditions on surface structure and ink interactions of dry surface treated papers. Professional papermaking.
2004, 1, Frankfurt. Wochenblatt fur Papierfabrikation. s. 84-94.
-
Maijala, J., Putkisto, K., Pietikäinen, R., & Grön, J.
Heat transfer during fixation of coating layers in dry surface treatment. Nordic Pulp and Paper Research Journal.
19, 2004, 3, pp. 291-299.
-
Mäkilä, P.
LTI modelling of NFIR systems: near-linearity and control, LS estimation and linearization. Automatica.
41, 2004, pp. 29-41.
-
Mäkilä, P.
On chaotic and random sequences. Physica D.
198, 2004, pp. 309-318.
-
Mäkilä, P.
On optimal LTI approximation of nonlinear systems. IEEE Transactions of Automatic Control.
49, 2004, 7, pp. 1178-1182.
-
Mäkilä, P. & Partington, J. R.
Input-output stabilization of linear systems on Z. IEEE Transactions of Automatic Control.
49, 2004, 11, pp. 1916-1928.
-
Mäkilä, P. & Partington, J.R.
Least-squares LTI approximation of nonlinear systems and quasistationary analysis. Automatica.
40, 2004, Elsevier. s. 1157-1169.
-
Putkisto, K., Maijala, J. Grön, J. & Rigdahl, M.
Dry-state preparation of coating particles to eliminate water usage prior to dry surface treatment of paper. Professional Papermaking.
2004, 1, Frankfurt. Wochenblatt fur Papierfabrikation. s. 95-101.
-
Putkisto, K., Maijala, J., Grön, J. & Rigdahl, M.
Viscoelastic structure properties of the polymer binder affecting the processabibity, structure and properties of dry surface treated papers. TAPPI Journal.
3, 2004, 6, s. 19- 25.
-
Savia, M. & Koivo, H. N.
Neural-network-based payload determination of a moving loader. Control Engineering Practice.
12, 2004, Elsevier. s. 555-561.
-
Viigipuu, K. & Kallio, P.
Microinjection of living adherent cells by using a semi-automatic microinjection system. ATLA, Alternatives to laboratory Animals.
32, 2004, 4, pp. 417-424.
Refereed Journal Articles int'l
2003
-
Kokko, T., Lautala, P. & Huhtelin, T.
Advanced control strategy for impingement drying. Drying Technology.
21, 2003, 10, s. 1971-1992.
-
Mäkilä, P.
Intrinsic difficulties in stochastic control of unstable convolution operators on Z. IEEE Transactions on Automatic Control.
48, 2003, 11, IEEE. s. 2015-2019.
-
Mäkilä, P.
Squared and absolute errors in optimal approximation of nonlinear systems. Automatica.
39, 2003, Elsevier Ltd. s. 1865-1876.
-
Mäkilä, P. & Paatilammi, J.
Steady-state Kalman-filtering with unstationary noise. Optimal Control Applications and Methods.
24, 2003, s. 57-71.
-
Mäkilä, P. & Partington, J.
On linear models for nonlinear systems. Automatica.
39, 2003, Elsevier Science Ltd.. s. 1-13.
Refereed Conference or Book Articles int'l
2011
-
Björninen, Toni; Lauri, Mikko; Koski, Karoliina; Ukkonen, Leena; Elsherbeni, Atef Z; Ritala, Risto; Sydänheimo, Lauri.
Wireless Measurement of the Wake-Up Power and Impedance of UHF RFID IC. AMTA 2011 33rd Antenna Measurement techniques Association Symposium, October 16-21, 2011, Englewood, Colorado, USA
2011, Englewood, CO. AMTA. 63-68.
-
Hästbacka, David; Kannisto, Petri; Kuikka, Seppo.
Business process modeling and SOA in industrial O&M application development. In: Zhang, Runtong; Cordeiro, Jose; Li, Xuewei; Zhang, Zhenji; Zhang, Juliang (ed.). ICEIS 2011, 13th International Conference on Enterprise Information Systems, Proceedings, Beijing, China, 8-11 June, 2011
3, 2011, Setubal. SciTePress. 277-285.
-
Hästbacka, David; Kuikka, Seppo.
Bridging UML profile based models and OWL ontologies in model-driven development- industrial control application. In: Helfert, Markus; Ge, Mouzhi; Pires, Luis; Hammoudi, Slimane; Toumani, Farouk; Monfort, Valerie; Jaziri, Wassim; Capel-Tunon, Manuel; Li, Chunping (ed.). Information Value Management, Future Trends of Model-Driven Development, Recent Trends in SOA Based Information Systems and Modeling and Simulation, Verification and Validation of Enterprise Information Systems, Beijing, China, June 2011
2011, Setubal. SciTePres. 13-23.
-
Hirvonen, Juha; Saketi, Pooya; Kallio, Pasi.
Automatic image-based detection of paper fiber ends. In: Zhang, Ting (ed.). Third International Conference on Digital Image Processing ICDIP 2011, Chengdu, China, April 15-17, 2011. Proceedings of SPIE
8009, 2011, 80092N.Bellingham, WA. SPIE. 1-5. http://dx.doi.org/10.1117/12.896172.
-
Konkarikoski, Kimmo; Kemppainen, Jorma.
Optimal quality limits for on-line measurements. Papercon2011, TAPPI International Conference, May 1-4, 2011, Covington, Kentucky, USA
2011, Norcross, GA. TAPPI. 971-978.
-
Kumpulainen, Pekka; Hätönen, Kimmo; Knuuti, Olli; Alapaholuoma, Teemu.
Internet traffic clustering using packet header information. Proceedings of the 14th Joint International IMEKO TC1 + TC7 + TC13 Symposium Intelligent Quality Measurements-Theory, Education and Training, 31.8- 2.9.2011, Jena, Germany
2011, Budapest. IMEKO. 1-7. http://www.db-thueringen.de/servlets/DerivateServlet/Derivate-24528/ilm1-2011imeko-050.pdf.
-
Kumpulainen, Pekka; Särkioja, Mika; Kylväjä, Mikko; Hätönen, Kimmo.
Analyzing 3G quality distribution data with fuzzy rules and fuzzy clustering. In: Iliadis, Lazaros; Jayne, Chrisina (ed.). Engineering Applications of Neural Networks, 12th INNS EANN-SIG International Conference, EANN 2011 and 7th IFIP WG 12.5 International Conference, AIAI 2011, Corfu, Greece, September 15-18, 2011, Proceedings Part I
363, 2011, Heidelberg. Springer. 402-411. http://dx.doi.org/10.1007/978-3-642-23957-1_45.
-
Kumpulainen, Pekka; Särkioja, Mika; Kylväjä, Mikko; Hätönen, Kimmo.
Finding 3G network cells with similar radio interface quality problems. In: Iliadis, Lazaros; Jayne, Chrisina (ed.). Engineering Applications of Neural Networks, 12th INNS EANN-SIG International Conference, EANN 2011 and 7th IFIP WG 12.5 International Conference, AIAI 2011, Corfu, Greece, September 15-18, 2011, Proceedings Part I
363, 2011, Heidelberg. Springer. 392-401. http://dx.doi.org/10.1007/978-3-642-23957-1_44.
-
Mustajoki, Jyri.
Comparison of weight distributions in multi-attrbbute value tree theory. In: Kostoglou, Vassilis; Arabatzis, Garyfallos; Karamitopoulos, Leonidas (ed.). BALCOR 2011, 1st International Symposium & 10th Balkan Conference on Operational Research, September 22-24,2011, Thessaloniki, Greece
1, 2011, Thessaloniki. Hellenic Operational Research Society. 300-307.
-
Peltokangas, Mikko; Verho, Jarmo; Vehkaoja, Antti.
Unobtrusive night-time EKG and HRV monitoring system. 2011 10th International Workshop on Biomedical Engineering, 5-7 October, 2011, Kos Island, Greece
2011, Piscataway, NJ. IEEE. 1-5. http://dx.doi.org/10.1109/IWBE.2011.6079018.
-
Peltola, Jukka; Sierla, Seppo; Vepsäläinen, Timo; Koskinen, Kari.
Challenges in industrial adoption of model-driven technologies in process control application design. 2011 9th IEEE International Conference on Industrial Informatics INDIN, Lisbon, Portugal, 26-29 July, 2011
2011, Piscataway, NJ. IEEE. 565-572. http://dx.doi.org/10.1109/INDIN.2011.6034941.
-
Riistama, Jarno; Vuorela, Timo.
Implantable measurement device to assist in determining the psychophysiological well-being of dairy cattle. IASTED 8th International Conference on Biomedical Engineering, Biomed 2011, Innsbruck, Austria; 16.-18.2.2011
2011, Calgary. ACTA Press. 271-278. http://dx.doi.org/10.2316/P.2011.723-118.
-
Ropponen, Aino; Rajala, Miika; Ritala, Risto.
Multiobjective optimization of the pulp/water storage towers in design of paper production systems. In: Pistikopoulos, E.; Georgiadis, M.; Kokossis, A. (ed.). 21st European Symposium on Computer Aided Process Engineering ESCAPE 21. Part A. Computer Aided Chemical Engineering
29, 2011, Amsterdam. Elsevier. 612-616. http://dx.doi.org/10.1016/B978-0-444-53711-9.50123-1.
-
Saketi, Pooya; Kallio, Pasi.
Microrobotic platform for making, manipulating and breaking individual paper fibre bonds. 2011 IEEE International Symposium on Assembly and Manufacturing ISAM 2011, Tampere, Finland, May 25-27, 2011
2011, Piscataway, NJ. IEEE. 1-6. http://dx.doi.org/10.1109/ISAM.2011.5942308.
-
Salminen, Lauri; Salmi, Ari; Engberg, Birgitta; Björkqvist, Tomas; Häggström, Edward; Lucander, Mikael.
Cyclic loading and fatigue of wood. In: Hirn, Ulrich (ed.). Progress in Paper Physics Seminar 2011 Conference Proceedings, Graz, Austria, September 5-8, 2011
2011, Graz. Verlag der Technischen Universität Graz. 243-246. http://dx.doi.org/10.3217/978-3-85125-163-0.
-
Salpavaara, Timo; Kumpulainen, Pekka.
Modelling nonlinear responses of resonance sensors in pressure garment application. In: Iliadis, Lazaros; Maglogiannis, Ilias; Papadopoulos, Harris (ed.). Artificial Intelligence Applications and Innovations, 12th INNS EANN-SIG International Conference, EANN 2011 and 7th IFIP WG 12.5 International Conference, AIAI 2011, Corfu, Greece, September 15-18, 2011, Proceedings, Part II
364, 2011, Heidelberg. Springer. 420-429. http://dx.doi.org/10.1007/978-3-642-23960-1_49.
-
Salpavaara, Timo; Verho, Jarmo; Kumpulainen, Pekka.
Performance of near-field radio-frequency pressure sensing method in compression garment application. MobiHealth, Wireless Mobile Communication and healthcare, Kos Island, Greece, 5-7 October, 2011
2011, Kos. ICST Conference on Wireless Mobile Communication and Healthcare. 1-8.
-
Tuisku, Outi; Surakka, Veikko; Gizatdinova, Yulia; Vanhala, Toni; Rantanen, Ville; Verho, Jarmo; Lekkala, Jukka.
Gazing and frowning to computers can be enjoyable. In: Ho, Tu Bao; McKay, R. I.; Nguyen, Xuan Hoai; Bui, The Duy (ed.). KSE 2011, the Third International Conference on Knowledge and Systems Engineering, 14-17 October, 2011, Hanoi, Vietnam
2011, Piscataway, NJ. IEEE. 211-218. http://dx.doi.org/10.1109/KSE.2011.41.
-
Vehkaoja, Antti; Verho, Jarmo; Cömert, Alper; Honkala, Markku; Lekkala, Jukka.
Wearable system for EKG monitoring - evaluation of night-time performance. MobiHealth, Wireless Mobile Communication and healthcare, Kos Island, Greece, 5-7 October, 2011
2011, Kos. ICST Conference on Wireless Mobile Communication and Healthcare. 1-8.
Refereed Conference or Book Articles int'l
2010
-
Björninen, Toni; Ukkonen, Leena; Sydänheimo, Lauri; Lauri, Mikko; Ritala, Risto; Elsherbeni, Atef.
Wireless measurement of UHF RFID tag chip impedance. Proceedings of 32nd Antenna Measurement Techniques Association AMTA 2010 Symposium, Atlanta, Georgia, October 10-15, 2010
2010, 35-40.
-
Eskelinen, Petri; Ruuska, Sauli; Miettinen, Kaisa; Wiecek, Margaret M.; Mustajoki, Jyri.
A scenario-based interactive multiobjective optimization method for decision making under uncertainty. In: Antunes C. H.; Insua D. R.; Dias, L.C. (ed.). Proceedings of the 25th Mini-EURO-Conference [URPM 2010], Uncertainty and Robustness in Planning and Decision Making, 15-17 April 2010, Coimbra, Portugal
2010, 1-7.
-
Fatikow, S.; Bartenwerfer, M.; Krohs, F.; Mikczinski, M.; Niewiera, F.; Weigel-Jech, M.; Saketi, Pooya; Kallio, Pasi.
Automated handling of bio-nanowires for nanopackaging. The IEEE/RSJ 2010 International Conference on Intelligent Robots and Systems IROS 2010, Taipei, Taiwan, October 18-22, 2010
2010, 3999-4004. http://dx.doi.org/10.1109/IROS.2010.5649313.
-
Hämäläinen, Raimo P.; Mustajoki, Jyri; Marttunen, Mika.
Web-based decision support: Creating a culture of appplying multi-criteria decision analysis and web-supported participation in environmental decision making. In: French Simon; Rios Insua David (ed.). e-Democracy. A Group Decision and Negotiation Perspective. Advances in Group Decision and Negotiation
5, 2010, Chapter 12, Springer. 201-221. http://dx.doi.org/10.1007/978-90-481-9045-4_12.
-
Heiskanen, Valtteri; Vanhanen, Satu; Kallio, Pasi.
Volume estimation of a liquid plug in a microchannel using a machine vision system. Proceedings of the 2nd European Conference on Microfluidics - Microfluidics 2010, Toulouse, December 8-10, 2010
2010, uFLU10-70, 1-10.
-
Hemmilä, Samu; Kreutzer, Joose; Kallio, Pasi.
New pneumatically actuated PDMS system for liquid handling in SPR devices. Proceedings of the 2nd European Conference on Microfluidics - Microfluidics 2010, Toulouse, December 8-10, 2010
2010,
-
Kattipparambil Rajan Dhanes; Lekkala, Jukka.
A maskless exposure device for rapid photolithographic prototyping of sensor and microstructure layouts. In: Jakoby Bernhard; Vellekop Michael (ed.).
2010, 1-4.
-
Knuuti, Olli; Seppälä, Timo; Alapaholuoma, Teemu; Ylinen, Jorma; Loula, Pekka; Kumpulainen, Pekka; Hätönen, Kimmo.
Construction communication profiles by clustering selected network traffic attributes. In: Lloret Mauri Jaime; Popescu Manuela (ed.). Proceedings, The Fifth International Conference on Internet Monitoring and Protection ICIMP 2010, 9-15 May 2010, Barcelona, Spain
2010, 105-109. http://dx.doi.org/10.1109/ICIMP.2010.21.
-
Konkarikoski, Kimmo.
State dependent optimization of measurement policy. In: Kahna S.H.; Grattan K. T. V.; Finkelstein L.; Kyriacou P. (ed.). 13th IMEKO TC1-TC7 Joint Symposium, 1-3 September 2010, City University London, UK. Journal of Physics: Conference Series
238, 2010, 1, 012028, 1-8. http://dx.doi.org/10.1088/1742-6596/238/1/012028.
-
Konkarikoski, Kimmo; Ritala, Risto; Ihalainen, Heimo.
Practical systems thinking. In: Kahna S.H.; Grattan K. T. V.; Finkelstein L.; Kyriacou P. (ed.). 13th IMEKO TC1-TC7 Joint Symposium, 1-3 September 2010, City University London, UK. Journal of Physics: Conference Series
238, 2010, 1, 012007, 1-8. http://dx.doi.org/10.1088/1742-6596/238/1/012007.
-
Konkarikoski, Kimmo; Ritala, Risto; Saarela, O.; Penttinen, I.
Improved decision support with structured process historians. PaperCon 2010 Conference, Twenty-Third Process Industry Reliability and Maintenance Conference, May 2-5, 2010, Atlanta, GA, USA
2010, 1-11.
-
Kreutzer, Joose; Honkanen, Markus; Laaksonen, Jaakko; Kallio Pasi.
Perfusion characterization using flow simulations and µPIV measurements. Proceedings of the 2nd European Conference on Microfluidics - Microfluidics 2010, Toulouse, December 8-10, 2010
2010, uFLU10-272, 1-9.
-
Kreutzer, Joose; Lehtinen, Pekka; Kallio, Pasi.
Dried nanoparticle label reagents for microfluidic immunoassays. Proceedings of the 2010 5th IEEE International Conference on Nano/Micro Engineered and Molecular Systems IEEE-NEMS 2010, January 20-23, 2010, Xiamen, China
2010, 230-235.
-
Kujala, Ville; Ryynänen, Tomi; Hyttinen, Jari; Lekkala, Jukka; Kerkelä, Erja; Aalto-Setälä, Katriina.
Electrophysiological studies of human embryonic stem cell-derived cardiomyocytes with novel microeletrode arrays. 7th International Meeting on Substrate-Integrated Microelectrode Arrays, 29.6. - 2.7.2010, Reutlingen, Germany
2010, 122-123.
-
Kumpulainen, Pekka; Marjanen, Kalle.
Directional variance analysis of annual rings. In: Kahna S.H.; Grattan K. T. V.; Finkelstein L.; Kyriacou, P. (ed.). 13th IMEKO TC1-TC7 Joint Symposium, 1-3 September 2010, City University London, UK. Journal of Physics: Conference Series
238, 2010, 1, 012047, 1-7. http://dx.doi.org/10.1088/1742-6596/238/1/012047.
-
Lauri, Mikko; Ihalainen, Heimo.
Measuring periodic patterns in noisy spatial data. Measurement Systems and Process Improvement MSPI 2010, Enbis – IMEKO TC 21 Workshop, 19-20 April 2010, National Physical Laboratory NPL, Teddington, UK
2010, 1-9.
-
Lekkala, Jukka; Salpavaara, Timo; Verho, Jarmo; Riistama, Jarno.
Simple inductively coupled resonance sensor for ECG and heart rate monitoring. In: Jakoby Bernhard; Vellekop Michael (ed.). Eurosensors XXIV. Conference Proceedings (preliminary CD-ROM issue), September 5-8, 2010, Linz, Austria
2010, 1-4.
-
Mäki, Antti-Juhana; Ronkanen, Pekka; Zhou, Quan; Kallio, Pasi.
Modeling continuous optoelectrowetting device. Proceedings of the 2nd European Conference on Microfluidics - Microfluidics 2010, Toulouse, December 8-10, 2010
2010, uFLU10-270, 1-10.
-
Mäntymaa, Anne; Halme, Jussi; Välimaa, Lasse; Kallio, Pasi.
The effects of laser welding on the heterogeneous immunoassay performance in a microfluidic cartridge. Proceedings of the 2nd European Conference on Microfluidics - Microfluidics 2010, Toulouse, December 8-10, 2010
2010, uFLU10-257, 1-7.
-
Mäntymaa, Anne; Välimaa, Lasse; Kallio, Pasi.
Solubility of dried nanoparticles and their nonspecific binding in microfluidic polystyrene channels. Proceedings of the 2nd European Conference on Microfluidics - Microfluidics 2010, Toulouse, December 8-10, 2010
2010, uFLU10-261, 1-12.
-
Mätäsniemi, Teemu; Vepsäläinen, Timo; Kuikka, Seppo.
Software development of safety functions in basic control systems - application of matrix based specification with UML model based approach. The 6th International Conference on Safety of Industrial Automated Systems SIAS 2010, Tampere, Finland, 14-15 June, 2010
2010, 1-6.
-
Nurminen, Kirsi; Ylä-Outinen, Laura; Narkilahti, Susanna; Lekkala, Jukka.
A capillary pH electrode for evaluating long term culturing of neural cell populations. In: Jakoby Bernhard; Vellekop Michael (ed.). Eurosensors XXIV. Conference Proceedings (preliminary CD-ROM issue), September 5-8, 2010, Linz, Austria
2010, 1-4.
-
Ohenoja, M.; Ylisaari, Johanna; Leiviskä, K.; Ritala, Risto.
Analyzing 2-dimensional variation based on scanning and imaging measurements. PaperCon 2010 Conference, Twenty-Third Process Industry Reliability and Maintenance Conference, May 2-5, 2010, Atlanta, GA, USA
2010, Tappi. 1-14.
-
Putkiranta, Maria; Marjanen, Kalle; Eloranta, Hannu; Pärssinen, Tero; Saarenrinne, Pentti.
On the flocculation in fiber suspensions. 7th International Conference on Multiphase Flow ICMF-2010, May 30 - June 4, 2010 Tampa, Florida
2010, 1-8.
-
Rajala, Miika; Lintunen, Jani; Ritala, Risto.
Lifecycle optimization of an integrated forest biorefinery under uncertain business environment. International Control Systems Program 2010, September 15-17, 2010, Stockholm, Sweden
2010, SPCI. 72-77.
-
Rajala, Miika; Lintunen, Jani; Ritala, Risto.
Uncertainty and flexibility in process lifecycle optimization. In: Antunes Carlos Henggeler; Insua David Rios; Dias Luis Candido (ed.). Proceedings of the 25th Mini-EURO Conference, Uncertainty and Robustness in Planning and Decision Making [URPDM 2010]. 15-17 April, Coimbra, Portugal
2010, 1-8.
-
Rajala, Satu; Lekkala, Jukka.
PVDF and EMFi sensor materials - A comparative study. In: Jakoby Bernhard; Vellokop Michael (ed.). Eurosensors XXIV. Conference Proceedings (preliminary CD-ROM issue), September 5-8, 2010, Linz, Austria
2010, 1-4.
-
Raunio, Jukka-Pekka; Tirronen, V.; Ritala, Risto; Nironen, I.; Rossi, R.; Kärkkäinen, T.
Web-wide diagnostics of paper properties based on fault detector system images. PaperCon 2010 Conference, Twenty-Third Process Industry Reliability and Maintenance Conference, May 2-5, 2010, Atlanta, GA, USA
2010, 1-13.
-
Raunio, Jukka-Pekka; Tirronen, Ville; Ritala, Risto; Lehtoranta, Ilkka.
2D basis weight estimation based on light transmittance imaging. International Control Systems Program 2010, September 15-17, 2010, Stockholm, Sweden
2010, SPCI. 124-129.
-
Roinila, Tomi; Helin, Tomi; Vilkko, Mikko; Hankaniemi, Mikko; Koivisto, Hannu.
Evaluating the confidence of frequency response function of a switched-mode converter using distributional models. ECCE, IEEE Energy Conversion Congress & Exposition September 12-16, 2010, Atlanta, USA
2010, 1987-1991. http://dx.doi.org/10.1109/ECCE.2010.5618121.
-
Ropponen, Aino; Ritala, Risto; Pistikopoulos efstratios.
Broke management optimization in design of paper production systems. In: Pierucci S.; Buzzi Ferraris G. (ed.). 20th European Symposium on Computer Aided Process Engineering ESCAPE-20, 6-9 June, Naples, Italy. Computer Aided Chemical Engineering
28, 2010, 865-870.
-
Ropponen, Aino; Ritala, Risto; Pistikopoulos, Efstratios.
Optimization issues of the broke management system - the value of the filler content measurement. International Control Systems Program 2010, September 15-17, 2010, Stockholm, Sweden
2010, SPCI. 186-191.
-
Ryynänen, Tomi; Kujala, Ville; Ylä-Outinen, Laura; Kerkelä, Erja; Narkilahti, Susanna; Lekkala, Jukka.
Polystyrene coated MEA. Proceedings of MEA Meeting 2010, the 7th International Meeting on Substrate-Integrated Microelectrode Arrays, Reutlingen, Germany, June 29 - July 2, 2010
2010, 265-266.
-
Ryynänen, Tomi; Nurminen, Kirsi; Hämäläinen, Jani; Leskelä, Markku; Lekkala, Jukka.
pH electrode based on ALD deposited iridium oxide. In: Jakoby Bernhard; Vellekop Michael (ed.). Eurosensors XXIV. Conference Proceedings (preliminary CD-ROM issue), September 5-8, 2010, Linz, Austria
2010, 1-4.
-
Saketi, Pooya; Treimanis, Arnis; Fardim, Pedro; Ronkanen, Pekka; Kallio, Pasi.
Microrobotics platform for manipulation and flexibility measurement of individual paper fibres. The IEEE/RSJ 2010 International Conference on Intelligent Robots and Systems IROS 2010, Taipei, Taiwan, October 18-22, 2010
2010, 5762-5767. http://dx.doi.org/10.1109/IROS.2010.5649723.
-
Salmenperä, Mikko; Salonen, Mikko.
Architecture and initial performance indicators of new OPCUA automation protocol stack Java implementation. CISSE 2009 , International Joint Conferences on Computer, Information and Systems Sciences and Engineering, Bridgeport, USA, December 4-12, 2009
2010, 1-6.
-
Salmenperä, Mikko; Salonen, Mikko.
Architecture and initial performance indicators of new OPCUA automation protocol stack Java implementation. In: Elleithy Khaled; Sobh Tarek; Iskander Magued; Kapila Vikram; Karim Mohammad A.; Mahmood Ausif (ed.). Technological Developments in Networking, Education and Automation
2010, Dordrecht. Springer. 345-350. http://dx.doi.org/10.1007/978-90-481-9151-2_60.
-
Salpavaara, Timo; Verho, Jarmo; Kumpulainen, Pekka; Lekkala, Jukka.
Wireless interrogation techniques for sensors utilizing inductively coupled resonance circuits. In: Jakoby Bernhard; Vellekop Michael (ed.). Eurosensors XXIV. Conference Proceedings (preliminary CD-ROM issue), September 5-8, 2010, Linz, Austria
2010, 1-4.
-
Savia, Mariaana; Zhou, Quan.
Van der Waals force computation of freely oriented rough surfaces for micromanipulation purposes. The IEEE/RSJ 2010 International Conference on Intelligent Robots and Systems IROS 2010, Taipei, Taiwan, October 18-22, 2010
2010, 5622-5627. http://dx.doi.org/10.1109/IROS.2010.5651772.
-
Tanskanen, Jarno M.A.; Kauppinen, Pasi; Ryynänen, Tomi; Lekkala, Jukka; Hyttinen, Jari A.K.
On microelectrode impedance measurements. 7th International Meeting on Substrate-Integrated Microelectrode Arrays, 29.6. - 2.7.2010, Reutlingen, Germany
2010, 243-244.
-
Vanhanen, S.; Järvelä, Pentti; Kallio, Pasi.
Sample volume metering in a disposable microfluidic cartridge. In: Verpoorte S. (ed.). Proceedings of the 14th International Conference on Miniaturized Systems for Chemistry and Life Sciences µTAS2010, Groeningen, the Netherlands, October 2010
2010, 1796-1798.
-
Vehkaoja, Antti; Salpavaara, Timo; Verho, Jarmo; Lekkala, Jukka.
EMFi material as wearable heart rate sensor for night time recordings. Sensors 2010, IEEE Sensors 2010 Conference, November 1-4, 2010, Waikoloa, Bic Island, Hawaii
2010, 145-149.
-
Vepsäläinen, Timo; Sierla, Seppo; Peltola, Jukka; Kuikka, Seppo.
Assessing the industrial applicability and adoption potential of the AUKOTON model driven control application engineering approach. 8th IEEE International Conference on Industrial Informatics, INDIN 2010, 13-16 July, 2010, Osaka, Japan
2010, 883-889. http://dx.doi.org/10.1109/INDIN.2010.5549626.
-
Vilkko, Matti; Kaivosoja, J.; Mäki, Antti; Kallio, Pasi.
Compensation of detent torque in microstepping of linear permanent magnet stepping motors. 12th International Conference on New Actuators, Actuator 2010, Bremen, Germany, June 2010
2010, P036,
-
von Essen, Mathias; Kuikka, Seppo; Kallio, Pasi.
Control software for automated microrobotic paper fiber characterization. In: Yang Qingxin; Xia Changliang; Wan Zhenkai (ed.). International Conference on Computer and Information Application 2010 ICCIA 2010, Tianjin, China, December 3-5, 2010
2010, 378-381.
-
Ylisaari, Johanna; Ritala, Risto.
Web-Wide transmittance imaging measurement variability analysis. International Control Systems Program 2010, September 15-17, 2010, Stockholm, Sweden
2010, SPCI. 118-123.
Refereed Conference or Book Articles int'l
2009
-
Bhagavati, V.A., Heiskanen, V. & Kallio, P.
An experimental investigation of liquid plug flows in polymeric mini-channels. Proceedings of the ASME 2009 7th International Conference on Nanochannels, Microchannels and Minichannels ICNMM2009, June 22-24, Pohang, South Corea.
2009, 7 p.
-
Björkqvist, T. & Tuovinen, O.
Process control in mechanical pulping - Grinding control. Leiviskä, K. (ed.). Process and Maintenance Management. Papermaking Science and Technology.
14, 2009, Chapter 7.2, Helsinki. Paper Engineering's Association/Paperi ja Puu. pp. 177-185.
-
Björkqvist, Tomas; Tuovinen, Olli.
Chapter 6 Grinding and pressure grinding, osio 6.8 Grinding control. In: Lönnberg Bruno (ed.). Mechanical Pulping. Papermaking Science and Technology
5, 2009, 2. ed., Helsinki. Paper Engineer's Association/Paperi ja Puu. 155-164.
-
Hästbacka, David; Mätäsniemi, Teemu.
Unifying process design with automation and control application development - an approach based on information integration and model-driven methods. Proceedings of the 13th IFAC Symposium on Information Control Problems in Manufacturing, INCOM'09, June 3-5, 2009, Moscow, Russia
2009, Moscow. IFAC. 1227-1232.
-
Iso-Ketola, P., Karinsalo, T., Myry, M., Halme, A., Salpavaara, T., Lekkala, J. & Vanhala, J.
Development of a lower extremity rehabilitation aid utilizing an insole-integrated load sensor matrix and a sole-embedded measurement node. ISWC'09. 13th IEEE International Symposium on Wearable Computers, 4-7 September, 2009, Linz, Austria.
2009, pp. 107-113. http://dx.doi.org/10.1109/ISWC.2009.20.
-
Kaivosoja, J. & Majanne, Y.
Dynamic modelling and simulation of fast pyrolysis process integrated with circulating fluidized bed boiler. In: Majanne, Y. (ed.). Preprints of IFAC Symposium on PP & PS Power Plants and Power Systems Control, 5-8 July, 2009, Tampere, Finland.
2009, 5 p.
-
Kärki, S., Kiiski, M. Mäntysalo, M. & Lekkala, J.
A PVDF sensor with printed electrodes for normal and shear stress measurements on sole. IMEKO XIX World Congress, Fundamental and Applied Metrology, Proceedings, September 6-11, 2009, Lisbon, Portugal.
2009, pp. 1765-1769.
-
Kärki, S., Lekkala, J. Kaistila, T, M. Laine, H.-J., Mäenpää, H. & Kuokkanen, H.
Plantar pressure distribution measurements: an approach to different methods to compute a pressure map. IMEKO XIX World Congress, Fundamental and Applied Metrology, Proceedings, September 6-11, 2009, Lisbon, Portugal.
2009, pp. 1770-1774.
-
Konkarikoski, K., & Ritala, R.
Elements of statistical decision making. IMEKO XIX World Congress, Fundamental and Applied Metrology, Proceedings, September 6-11, 2009, Lisbon, Portugal.
2009, pp. 1042-1047.
-
Korpela, T. , Björkqvist, T. & Lautala, P.
Control strategy for small-scale wood chip combustion. In: Majanne, Y. (ed.). Preprints of IFAC Symposium on PP & PS Power Plants and Power Systems Control, 5-8 July, 2009, Tampere, Finland.
2009,
-
Kreutzer, J., Lappalainen, R., Ylä-Outinen, L., Narkilahti, S., Mikkonen, J. & Kallio, P.
Laminin coated PDMS surfaces for long-term measurements of hESC-derived neural networks. In: Tanskanen, J.M.A. & Hyttinen, J.A.K. (eds.). Proceedings of the 2009 Symposium on Microelectrode Arrays in Tissue Engineering, 4.-5.6.2009, Tampere, Finland.
2009, pp. 23-25.
-
Kumpulainen, P., Kylväjä, M. & Hätönen, K.
Importance of scaling in unsupervised distance-based anomaly detection. IMEKO XIX World Congress, Fundamental and Applied Metrology, Proceedings, September 6-11, 2009, Lisbon, Portugal.
2009, pp. 2411-2416.
-
Kumpulainen, P., Mettänen, M., Lauri, M. & Ihalainen, H.
Relating halftone dot quality to paper surface topography. In: Palmer-Brown, D., Draganova, C., Pimenidis, E. & Mouratidis, H. (eds.). 11th International Conference, EANN 2009, Engineering Applications of Neural Networks. Proceedings, London, UK, August 27-29, 2009. Communications in Computer and Information Science, CCIS.
43, 2009, p. 178-189. http://dx.doi.org/10.1007/978-3-642-03969-0_17.
-
Majanne, Y. & Köykkä, P.
Dynamic model of a circulating fluidized bed boiler. In: Majanne, Y. (ed.). Preprints of IFAC Symposium on PP & PS Power Plants and Power Systems Control, 5-8 July, 2009, Tampere, Finland.
2009, 6 p.
-
Majanne, Y. & Maasalo, M.
Dynamic simulation assisted design of industrial power plant process and control. In: Majanne, Y. (ed.). Preprints of IFAC Symposium on PP & PS Power Plants and Power Systems Control, 5-8 July, 2009, Tampere, Finland.
2009, 6 p.
-
Marjanen, K., Ihalainen, H. & Yli-Fossi, T.
Measuring paper quality by texture analysis. In: Madetoja, E., Niskanen, H. and Hämäläinen, J. (eds.). PRS - Papermaking Research Symposium. Book of Abstract, CD-Rom Proceedings. 01-04 June 2009, Kuopio, Finland.
2009, 13 p.
-
Marjanen, K., Ojala, P. & Mäkinen, M.
Spectral reflectances of log ends for camera based annual ring width measurements. IMEKO XIX World Congress, Fundamental and Applied Metrology, Proceedings, September 6-11, 2009, Lisbon, Portugal.
2009, pp. 1158-1163.
-
Mettänen, M., Hirn, U., Lauri, M. & Ritala, R.
Probabilistic analysis of small-scale print defects with aligned 2D measurements. In: I`Anson, S.J. (ed.). Advances in Pulp and Paper Research, Transactions fo the 14th Fundamental Research Symposium, 13th-18th September 2009, Oxford, England.
2, 2009, The Pulp & Paper Fundamental Research Society. pp. 1293-1323.
-
Mettänen, M., Lauri, M., Ihalainen, H., Kumpulainen, P. & Ritala, R.
Aligned analysis of surface topography and printed dot pattern maps. In: Madetoja, E., Niskanen, H. and Hämäläinen, J. (eds.). PRS - Papermaking Research Symposium. Book of Abstract, CD-Rom Proceedings. 01-04 June 2009, Kuopio, Finland.
2009, 11 p.
-
Mettänen, M., & Ritala, R.
Measurement as information channel with an application to printability. IMEKO XIX World Congress, Fundamental and Applied Metrology, Proceedings, September 6-11, 2009, Lisbon, Portugal.
2009, pp. 1086-1090.
-
Palmroth, L., Tervo, K. & Putkonen, A.
Intelligent coaching of mobile working machine operators. INES 2009, IEEE 13th International Conference on Intelligent Engineering Systems, Barbados, April 16-18,2009.
2009, pp. 149-154.
-
Pulkkinen, P. & Ritala, R.
Scheduling of an integrated forest biorefinery using multi-parametric programming. In: Pierucci, S. (ed.). ICheaP-9, 9th International Conference on Chemical and Process Engineering, 10-13 May 2009, Rome, Italy. Chemical Engineering Transactions.
17, 2009, 3, p. 1299-1304. http://dx.doi.org/10.3303/CET0917217.
-
Pulkkinen, Pietari.
A multiobjective genetic fuzzy system for obtaining compact and accurate fuzzy classifiers with transparent fuzzy partitions. In: Wani Arif M.; Kantardzic Mehmed; Palade Vasile; Kurgan Lukasz; Qi Yuan (ed.). ICMLA '09. International Conference on Machine Learning and Applications, Miami Beach, Florida, USA, 13-15 December 2009
2009, 89-94. http://dx.doi.org/10.1109/ICMLA.2009.20.
-
Raunio, J-P. & Ritala, R.
Analysis of paper structure based on light transmittance and basis weight measurements. In: Madetoja, E., Niskanen, H. and Hämäläinen, J. (eds.). PRS - Papermaking Research Symposium. Book of Abstract, CD-Rom Proceedings. 01-04 June 2009, Kuopio, Finland.
2009, 11 p.
-
Raunio, J.-P., & Ritala, R.
Estimation of basis weight of paper: Light transmittance measurements over eight orders of magnitude of spatial scale. IMEKO XIX World Congress, Fundamental and Applied Metrology, Proceedings, September 6-11, 2009, Lisbon, Portugal.
2009, pp. 1109-1114.
-
Ritala, R.
Managing paper machine operation. In: Leiviskä, K. (ed.). Process and Maintenance Management. Papermaking Science and Technology.
14, 2009, 2. ed., Paper Engineers´ Association/Paperi ja Puu Oy. pp. 190-232.
-
Roinila,T., Vilkko, M. & Suntio, T.
Fast frequency response measurement of switched-mode converters in the presence of nonlinear distortions. IEEE Energy Conversion Congress and Exposition ECCE. IEEE, San Jose, CA, USA, 20-24 September 2009.
2009, pp. 3014-3020. http://dx.doi.org/10.1109/ECCE.2009.5316301.
-
Ryynänen, T., Kattipparambil Rajan, D. & Lekkala, J.
Consept for low-cost rapid prototyping of new MEA designs. In: Tanskanen, J. M. A & Hyttinen, J. A. K. (eds.). Proceedings of the 2009 Symposium on Microelectrode Arrays in Tissue Engineering (MEATE). June 4-5, 2009, Tampere, Finland. Tampere University of Technology. Department of Biomedical Engineering, Report.
2, 2009, pp. 26-28.
-
Saketi, P., Kreutzer, J., Niemelä, K., Välimaa, L. & Kallio, P.
Automated modular bacterial filtering system with embeddable microfluidic chips. IEEE International Conference on Automation Science and Engineering, 2009, CASE 2009, 22-25 August 2009, Bangalore, India.
2009, pp. 212-216. http://dx.doi.org/10.1109/COASE.2009.5234162.
-
Salpavaara, T., Verho, J., Lekkala, J. & Halttunen, J.
Wireless insole sensor system for plantar force measurements during sport events. IMEKO XIX World Congress, Fundamental and Applied Metrology, Proceedings, September 6-11, 2009, Lisbon, Portugal.
2009, pp. 2118-2123.
-
Vehkaoja, A. & Lekkala, J.
A simple bioelectrical signal simulator for measurement device testing. IMEKO XIX World Congress, Fundamental and Applied Metrology, Proceedings, September 6-11, 2009, Lisbon, Portugal.
2009, pp. 1653-1657.
-
Ylisaari, J., Konkarikoski, K., Ritala, R., Kokko, T. & Mäntylä, M.
Simulator for testing measurement, estimation and control methods in 2D processes. In: Troch, I. & Breitenecker, F. (eds.). Proceedings of Mathmod 09 Vienna. 6th Vienna Conference on Mathematical Modelling, February 11-13, 2009, Vienna, Austria. Argesim Report.
35, 2009, p. 163-172.
-
Zakrzewski, M., Junnila, S., Vehkaoja, A., Kailanto, H., Vainio, A-M., Defee, I., Lekkala, J., Vanhala J. & Hyttinen, J.
Utilization of wireless sensor network for health monitoring in home environment. 2009 IEEE International Symposium on Industrial Embedded Systems, SIES '09, July 8-10, 2009, Lausanne, Switzerland.
2009, pp. 132-135. http://dx.doi.org/10.1109/SIES.2009.5196206.
Refereed Conference or Book Articles int'l
2008
-
Cömert, A., Honkala, M., Aydogan, B., Vehkaoja, A., Verho, J. & Hyttinen, J.
Comparison of different structrures of silver yarn electrodes for mobile monitoring. In: Vander Sloten, J. et al. (eds.). 4th European Conference of the International Federation for Medical and Biological Engineering, 23-27 November 2008, Antwerp, Belgium. IFMBE Proceedings.
2008, pp. 1204-1207. http://dx.doi.org/10.1007/978-3-540-89208-3_288.
-
Hirvonen, J., Ronkanen, P., Ylikomi,T., Bläuer, M., Suuronen, R., Skottman, H. & Kallio, P.
Microcutting of living tissue slices and stem cell colonies by using mechanical tool. Proceedings of the 2nd IEEE/RAS-EMBS International Conference on Biomedical Robotics and Biomechatronics BioRob 2008, Scottsdale, USA, October 19-22, 2008.
2008, 6 p.
-
Hirvonen, J., Vilkko, M., Roinila, T. & Kallio, P.
Estimation of electrical cell-capillary admittance during injection with frequency response method. In: Chung, M.J. et al. (eds.). IFAC 17th World Congress, July 6-11, 2008, Seoul, Korea.
2008, pp. 13749-13754.
-
Hytti, H.
Efficient signal reconstruction and analysis for integrated SHM system. In: Uhl, T., Ostachowicz, W. & Holnicki-Szulc, J. (eds.). Proceedings of the Forth European Workshop, Structural Health Monitoring 2008, July 2-4, 2008, Cracow, Poland.
2008, p. 316-323.
-
Kärki, S. & Lekkala, J.
Film-type transducer materials PVDF and EMFi in the measurement of heart and respiration rates. 30th Annual International Conference of the IEEE Engineering in Medicine and Biology Society, IEEE EMBS, Personalized Healthcare through Technology, August 20-24, 2008, Vancouver, British Columbia, Canada.
2008, p. 530-533.
-
Kumpulainen, P. & Hätönen, K.
Anomaly detection algorithm test bench for mobile network management. MathWorks MATLAB User Conference Nordic, The MathWorks Conference Proceedings, November 20-21, 2008, Stockholm , Sweden.
2008, 8 p.
-
Majanne, Y.
Possibilities of fault tolerant control in thermal process plants. In: Chung, M.J. et al. (eds.). IFAC 17th World Congress, July 6-11, 2008, Seoul, Korea.
2008, pp. 10657-10661.
-
Muukkonen, T., Hytti, H., Huovila, H., Känsälä, K. & Lehtonen, M.
Adaptable integrated SHM system for metallic and composite structures. In: Uhl, T., Ostachowicz, W. & Holnicki-Szulc, J. (eds.). Proceedings of the Forth European Workshop, Structural Health Monitoring 2008, July 2-4, 2008, Cracow, Poland.
2008, p. 349-356.
-
Rajala, M.
Heavy loading effects in networked systems. Proceedings of the 2008 IEEE Conference on Soft Computing in Industrial Applications SMCia/08, June 25-27 2008, Muroran Hokkaido, Japan.
2008, p. 119-124.
-
Roinila, T., Jaatinen, A. & Vilkko, M.
Corrected mathematical model of quadruple tank process. In: Chung, M.J. et al. (eds.). IFAC 17th World Congress, July 6-11, 2008, Seoul, Korea.
2008, pp. 11678-11683.
-
Ropponen, A. & Ritala, R.
Production-line wide dynamic Bayesian network model for quality management in papermaking. In: Braunschweig, B. & Joulia, X. (eds.). 18th European Symposium on Computer Aided Process Engineering - ESCAPE18. June 1-4, 2008, Lyon, France. Computer-Aided Chemical Engineering.
25, 2008, p. 979-984.
-
Salpavaara, T., Verho, J. & Lekkala, J.
Capacitive insole sensor for hip surgery rehabilitation. ICST Pervasive Health; The Second International Conference on Pervasive Computing Technologies for Healthcare 2008, Jan 29 - Feb 01, 2008, Tampere, Finland.
2008, p. 311-314. http://dx.doi.org/10.1109/PCTHEALTH.2008.4571100.
-
Salpavaara, T., Verho, J. & Lekkala, J. & Halttunen, J.
Embedded capacitive sensor system for hip surgery rehabilitation: online measurements and long-term stability. 30th Annual International Conference of the IEEE Engineering in Medicine and Biology Society, IEEE EMBS, Personalized Healthcare through Technology, August 20-24, 2008, Vancouver, British Columbia, Canada.
2008, p. 935-938.
-
Tervo, K., Palmroth, L., Hölttä, V. & Putkonen, A.
Improving operator skills with productivity model feedback. In: Chung, M.J. et al. (eds.). IFAC 17th World Congress, July 6-11, 2008, Seoul, Korea.
2008, pp. 15724-15729.
-
Vehkaoja, A., Verho, J., Cömert, A., Aydogan, B., Perhonen, M., Lekkala, J. & Halttunen, J.
System for ECG and heart rate monitoring during group training. 30th Annual International Conference of the IEEE Engineering in Medicine and Biology Society, IEEE EMBS, Personalized Healthcare through Technology, August 20-24, 2008, Vancouver, British Columbia, Canada.
2008, p. 4832-4835.
Refereed Conference or Book Articles int'l
2007
-
Eloranta, H., Marjanen, K., Honkanen, M. & Saarenrinne, P.
Evaluation the interaction between turbulence and dispersed fispersed fibers in a channel flow by combining PIV and imaging. 7th International Symposium on Particle Image Velocimetry, Rome, Italy, 11.-14.9.2007.
2007, 11p.
-
Gren, J., Konkarikoski, K. & Ritala, R.
Optimal measurement schedule to support quality management. 9th ISMQC Proceedings of the 9th International Symposium on Measurement and Quality Control. November 21-24, 2007, Chennai, India. International Measurement Confederation (IMEKO).
2007, p. 313-318.
-
Gren, J., Konkarikoski, K. & Ritala, R.
Optimal off-line measurement schedule to support process and quality management. In: Gani, R. & Dam-Johansen, K. (eds.). European Conference of Chemical Engineering - 6. ECCE-6 Book of Abstracts, Volume 1, and Volume 2, Technical Program Book and Conference DC. 16-20 September, Copenhagen, Denmark, 2007. EFCE Event Number 669.
1 & 2, 2007, p. 473-474, 12 p.
-
Honkanen, M. & Marjanen, K.
Analysis of the overlapping images of irregularly-shabed particles, bubbles and droplets. Proceedings of ICMF 2007 6th International Conference on Multiphase Flow, Leipzig, Germany, 9.-13.7.2007.
2007, 559, 13 p.
-
Kärki, S., Kääriäinen, M. & Lekkala, J.
Measurement of heart sounds with EMFi transducer. IEEE, EMB 2007, Sciences and Technologies for Health, the 29th Annual International Conference of the IEEE EMBS Engineering in Medicine and Biology Society in conjunction with the Biennial Conference of the French Society of Biological and Medical Engineering (SFGBM), August 23-26, 2007, Lyon, France.
2007, p. 1683-1686.
-
Kärki, S., Salpavaara, T. & Lekkala, J.
EMFi in wearable audio applications. In: Leonhardt, S., Falck, T. & Mähönen, P. (Eds.). 4th International Workshop on Wearable and Implantable Body Sensor Networks (BSN 2007), March 26-28,2007, RWTH Aachen University, Germany. IFMBE Proceedings.
13, 2007, p. 86-91.
-
Kovanen, K., Lukkari, M., Purmonen, S., Ylikomi, T., Viitanen, J. & Kallio, P.
Electric impedance assisted micropipette aspiration. IEEE, EMB 2007, Sciences and Technologies for Health, the 29th Annual International Conference of the IEEE EMBS Engineering in Medicine and Biology Society in conjunction with the Biennial Conference of the French Society of Biological and Medical Engineering (SFGBM), August 23-26, 2007, Lyon, France.
2007, pp. 5822-5825.
-
Kumpulainen, P. & Hätönen, K.
Local anomaly detection for network system log monitoring. In: Konstantionis, M. & Lazaros, I. (eds.). EANN 2007. Proceedings of the 10th International Conference on Engineering Applications of Neural Networks, 29-31 August 2007, Thessaloniki, Greece.
2007, p. 34-44.
-
Laitinen, O. & Kuikka, S.
On the competence development of control engineers. Proceedings of 5th International Conference on Researching Work and Learning RWL5, 2-5 December, 2007, Cape Town, South Africa.
2007, pp. 522-527.
-
Lampinen, T., Laurikkala, M., Koivisto, H. & Honkanen, T.
Profiling network applications with fuzzy C-means and self-organizing maps. In : Halgamuge, S. & Wang, L. (eds.) : Classification and clustering for knowledge discovery. Studies in computational intelligence.
4, 2007, pp. 15-28.
-
Mäkelä, M., Manninen, V., Ptak, P., Tolonen, M. & Ylisaari, J.
Improving profile estimation on paper and board machines. In: Jämsä-Jounela, S-L. (ed.). 14th Nordic Process Control Workshop. Helsinki University of Technology Laboratory of Process Control and Automation 12. August 23 - 25, 2007, Espoo, Finland.
2007, p. 148-152.
-
Mettänen, M., Ihalainen, H. & Ritala, R.
Alignment and statistical analysis of 2D small-scale paper property maps. 61st Appita Annual Conference and Exhibition. Proceedings of International Paper Physics Conference Papers, 6-10 May 2007, Gold Coast, Australia.
2, 2007, p. 199-207.
-
Riistama, J. & Lekkala, J.
Electrochemical noise properties of different electrode materials in different electrolytes. In: Leonhardt, S., Falck, T. & Mähönen, P. (Eds.). 4th International Workshop on Wearable and Implantable Body Sensor Networks (BSN 2007), March 26-28,2007, RWTH Aachen University, Germany. IFMBE Proceedings.
13, 2007, p. 149-154.
-
Riistama, J., Väisänen, J., Heinisuo,S., Lekkala, J. & Kaihilahti, J.
Evaluation of an implantable ECG monitoring device in vitro and in vivo. IEEE, EMB 2007, Sciences and Technologies for Health, the 29th Annual International Conference of the IEEE EMBS Engineering in Medicine and Biology Society in conjunction with the Biennial Conference of the French Society of Biological and Medical Engineering (SFGBM), August 23-26, 2007, Lyon, France.
2007, p. 5703-5706.
-
Ritala, R., Alhoniemi, E., Kauranne, T., Konkarikoski, K., Lendasse, A. & Sirola, M.
Nonlinear ternporal and spatial forecasting: modeling and uncertainty analysis (NoTeS) - MASIT20. In: Alakangas, E. & Taskinen, P. (eds.). MASI Technology Programme 2005-2009. Yearbook 2007. Tekes Technology review.
207, 2007, p. 179-188.
-
Ronkanen, P., Kallio, P. & Koivo, H.N.
Simultaneous actuation and force estimation using piezoelectric actuators. 2007 IEEE International Conference on Mechatronics and Automation, August 5-8, 2007, Harbin, China.
2007, pp. 3261-3265.
-
Ropponen, A., Konkarikoski, K. & Ritala, R.
Dynamic validation of models: A case study on plug-flow reactor. In: Zupancic, B., Karba, R. & Blazic, S. (eds.). EUROSIM2007. Proceedings of the 6th Eurosim Congress on Modelling and Simulation. Vol. 1: Book of Abstracts and Vol. 2: Full papers (CD). 9-13 September, 2007, Ljubljana, Slovenia..
1 and 2, 2007, p. 133/1-7.
-
Ryynänen, T. & Lekkala, J.
Backside detection of photoresist development endpoint using surface plasmon resonance. ASMC 2007. Proceedings of the 18th Annual IEEE/SMI Advanced Semiconductor Manufacturing Conference, 11-12 June 2007, Stresa, Italy.
2007, p. 283-287.
-
Vehkaoja, A., Lekkala, J., Zakrzewski, M., Iyengar, S., Bajcsy, R., Glaser, S., Sastry, S. & Jafari, R.
A resource optimized physical movement monitoring scheme for environmental and on-body sensor networks. MobiSys´07. Proceedings of the Fifth International Conference on Mobile Systems, Applications, and Services. HealthNet2007: The 1st International Workshop on Systems and Networking Support for Healthcare and Assisted living Environments. 11-14 June 2007, San Juan, Puerto Rico, USA.
2007, p. 64-66.
-
Ylisaari, J., Konkarikoski, K. & Ritala, R.
Estimation of 2-dimensional variation on the basis of irregularly moving scanning sensor. In: Jämsä-Jounela, S-L. (ed.). 14th Nordic Process Control Workshop. Helsinki University of Technology Laboratory of Process Control and Automation 12. August 2007, Espoo, Finland.
2007, p. 142-147.
Refereed Conference or Book Articles int'l
2006
-
Hytti, H.
Characterization of digital image noise properties based on RAW data. In: Cui, Luke C. & Mjyake, Yoichi (charis/eds.). Proceedings of Electronic Imaging, Science and Technology. Image Quality and System Performance III, (15)17-19 January 2006, San Jose, California, USA. SPIE proceedings.
6059, 2006, p. 1-12.
-
Jokinen, H., Latva-Käyrä, K., Pulkkinen, P. & Ritala, R.
Modelling of uncertainty: case studies on operation of papermaking process. In: Troch, I. & Breitenecker, F. (eds.). Proceedings of the 5th Mathmod Vienna, 5th Vienna Symposium on Mathematical Modelling, 8-10 February, 2006, Vienna, Austria, Argesim report.
30, 2006, p. 4 - 1-10.
-
Jylhä, J., Marjanen, K., Rantala, M., Metsäpuro, P. & Visa, A.
An efficient approach for site-specific scenery prediction in surveillance imaging near Earth's surface. In: Bruzzone, L. (ed. ). Image and Signal Processing for Remote Sensind XII, Stockholm, Sweden, 11-14 September 2006. Proceedings of SPIE.
6365, 2006, 11 p. http://dx.doi.org/10.1117/12.689918.
-
Kallio, P., Ritala, T. Lukkari, M. & Kuikka, S.
Injection guidance system for cellular microinjections. Proceedings of BioRob, Biomedical Robotics and Biomechatronics, Pisa, Italy, February 20-22, 2006.
2006, pp. 272-277.
-
Koivuniemi, K. & Ritala, R.
Model-based estimation of microbial state in paper mill broke tower. In: Ritala, R. (ed.). Control Systems 2006. Conference. Measurement and control - Applications for the operator. 6-8 June, 2006, Tampere, Finland.
2006, p. 31-36.
-
Kuncova-Kallio, J. & Kallio, P.
PDMS and it's suitability for analytical microfluidic devices. 28th Annual International Conference of the IEEE Engineering in Medicine and Biology Society, 30 August - 3 September, 2006, New York, NY, USA.
2006, pp. 2486-2489.
-
Lautala, P.
Safeprocess '94. In: Aalto, H. et al. (eds.). IFAC Activities in Finland 1956-2006.
2006, Helsinki. Finnish Society of Automation. pp. 46-47.
-
Loisa, M.
On-line quality control to improve runnability and quality of TMP refiner line. In: Ritala, R. (ed.). Control Systems 2006. Conference. Measurement and control - Applications for the operator. 6-8 June, 2006, Tampere, Finland.
2006, p. 161-166.
-
Mäkiranta, J., Verho, J., Lekkala, J. & Matintupa, N.
Novel measurement method for magnetic particles. Proceedings of the 28th Annual International Conference of the IEEE Engineering in Medicine and Biology Society - EMBS. Engineering Revolution in Biomedicine, 30 August - 3 September, 2006, New York City, New York, USA.
2006, p. 4598-4601.
-
Pulkkinen, P., Hakala, T. & Ritala, R.
Hybrid optimization algorithm for scheduling decision support. In: Mohammadian, M. (ed.). International Conference on Computational Intelligence for Modelling Control and Automation - CIMCA´2006. Jointly with International Conference on Intelligent Agents, Web Technologies & Internet Commerce - IAWTIC´2006, 29 November - 1 December, Sydney, Australia, 2006. Book of Abstracts and Conference Program.
2006, 6 p.
-
Pulkkinen, P. & Ritala, R.
Joint scheduling of TMP and paper production under uncertainty. In: Ritala, R. (ed.). Control Systems 2006. Conference. Measurement and control - Applications for the operator. 6-8 June, 2006, Tampere, Finland.
2006, p. 85-90.
-
Pulkkinen, P. & Ritala, R.
Scheduling of identical and parallel on/off production units under uncertainty in cost and demand prediction. In: Marquardt, W. & Pantelides, C. (eds.). 16th European Symposium on Computer Aided Process Engineering and 9th International Symposium on Process Systems Engineering, 9-13, July, 2006, Garmisch-Partenkirchen, Germany. Computer-Aided Chemical Engineering.
21B, 2006, p. 2045-2050.
-
Rajala, M. & Ritala, R.
Mutual Information and multidimensional scaling as means to reconstruct network topology. SICE-ICCAS 2006 International Joint Conference 2006, 18-21 October 2006, BEXCO, Busan, KOREA.
2006, p. 1398-1403.
-
Rajala, M. & Ritala, R.
Statistical model describing networked systems phenomena. In: Bellavista, P. & Chen, C-M. (eds), Corradi, A. & Daneshmand, M. (gen. chairs). Proceedings, 11th IEEE Symposium on Computers and Communications, ISCC 2006, 26-29 June 2005, Cagliari, Sardinia, Italy.
2006, p. 647-654.
-
Riistama, J. & Lekkala, J.
Electrode-electrolyte interface properties in implantation conditions. Proceedings of the 28th Annual International Conference of the IEEE Engineering in Medicine and Biology Society - EMBS. Engineering Revolution in Biomedicine, 30 August - 3 September, 2006, New York City, New York, USA.
2006, p. 6021-6024.
-
Ritala, R., Blanco, A., Dahlquist, E., Kappen, J., Manninen, J. & Negro, C.
Use of Modelling and Simulation in the Pulp and Industry. In: Troch, I. & Breitenecker, F. (eds.). Proceedings of the 5th Mathmod Vienna, 5th Vienna Symposium on Mathematical Modelling, 8-10 February, 2006, Vienna, Austria, Argesim report.
30, 2006, p. 1 - 1-10.
-
Vehkaoja, A.T., Verho, J.A. & Lekkala, J.O.
Miniature wireless measurement node for ECG signal transmission in home area network. Proceedings of the 28th Annual International Conference of the IEEE Engineering in Medicine and Biology Society - EMBS. Engineering Revolution in Biomedicine, 30 August - 3 September, 2006, New York City, New York, USA.
2006, p. 2049-2052.
Refereed Conference or Book Articles int'l
2005
-
Berki, E., Lehmonen, J., Manninen, V., Veijalainen, J., Moisanen, P., Ritala, R., Haarla, E. & Suokas, M.
Requirements analysis for process and product quality improvements: building-in software quality by designing and information systems for assessing and analysing efficiency of paper mills. In: Bennetts, P., Ross, M. & Staples, G. (eds.). Thirteenth International Conference on Software Quality Management, SQM2005, Cheltenham, UK.
2005, pp. 139-165.
-
Kovanen, K., Purmonen, S., Ylikomi, T. & Kallio, P.
Combined cell survival and injection success rate in microinjection of living adherent cells. The 3rd European Medical and Biological Engineering Conference EMBEC'05, Prague, Czech Republic, Nov. 20-25, 2005.
2005, 5 p.
-
Kumpulainen, P., Kylväjä, M. & Hätönen, K.
Information summarization for network performance management. In: Laszlo, M. & Zsolt, J.V. (eds.). Proceedings of the 10th IMEKO TC10 International Conference on Technical Diagnostics, 9-10 June, 2005, Budapest, Hungary.
2005, pp. 167-172.
-
Latva-Käyrä, K. & Ritala, R.
Dynamic validation of multivariate linear soft sensors with reference laboratory measurements. In: Kappen, J., Manninen, J. & Ritala, R. (eds.). COST ACTION E36, Modelling and simulation in pulp and paper industry, Proceedings of Model Validation Workshop, 6 October, 2005, Espoo, Finland. VTT Symposium.
238, 2005, p. 57-64.
-
Latva-Käyrä, K. & Ritala, R.
Sensor diagnostics based on dynamic characteristic curve estimation. In: Laszlo, M. & Zsolt, J.V. (eds.). Proceedings of the 10th IMEKO TC10 International Conference on Technical Diagnostics, 9-10 June, 2005, Budapest, Hungary.
2005, pp. 9-13.
-
Lukkari, M. & Kallio, P.
Multi-purpose impedance-based measurement system to automate microinjection of adherent cells. Proceedings of 2005 IEEE International Symposium on Computational Intelligence in Robotics and Automation, CIRA2005, June 27-30, 2005, Espoo, Finland.
2005, 6 p.
-
Mäkiranta, J., Kallio, P. & Lekkala, J.
A novel modeling method of surface roughness in a microfluid channel. In: Amundsen, J., Andersson, H., Celledoni, E., Gravdahl, T., Michelsen, F., Nagel, H. & Natvik, T. (eds.). SIMS 2005, 46th Conference on Simulation and Modeling. 13-14 October, 2005, Trondheim, Norway.
2005, p. 207-212.
-
Mäkiranta, J. & Lekkala, J.
Modeling and simulation of magnetic nanoparticle sensor. Proceedings of EMBC´05, 27th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC ´05). Innovation from Biomolecules to Biosystems, 1-4 September, 2005, Shanghai, China.
2005, pp. 2183-2186.
-
Rajala, M. & Ritala, R.
Identification of diagnostic statistical state models for networked system. In: Laszlo, M. & Zsolt, J.V. (eds.). Proceedings of the 10th IMEKO TC10 International Conference on Technical Diagnostics, 9-10 June, 2005, Budapest, Hungary.
2005, pp. 161-166.
-
Rajala, M. & Ritala, R.
Transient dynamics of non-linear models describing multi-stable stochastic systems. Proceedings of the International Joint Conference on Neural Networks IJCNN 2005, 31 July - 4 August, 2005, Montréal, Québec, Canada.
2005, pp. 3324-3329.
-
Riistama, J., Lekkala, J., Väisänen, J., Heinisuo, S. & Hyttinen, J.
Introducing a wireless, passive and implantable device to measure ECG. In: Kneppo, P. & Hozman, J. (eds.). 3rd European Medical & Biological Engineering Conference, IFMBE European Conference on Biomedical Engineering EMBEC´05, 20-25 November, 2005, Prague, Czech Republic. IFMBE Proceedings.
11, 2005, 5 p.
-
Vehkaoja, A., Verho, J., Lekkala, J., Puurtinen, M., Nöjd, N. & Hyttinen, J.
Wireless head cap for EOG and facial EMG measurements. Proceedings of EMBC´05, 27th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC ´05). Innovation from Biomolecules to Biosystems, 1-4 September, 2005, Shanghai, China.
2005, pp. 348-351.
-
Vesterinen, T. & Ritala, R.
Bioprocesses and other production processes with multistability for method testing and analysis. In: Puigjaner, L. & Espuna, A. (eds.). 38th European Symposium of the Working Party on Computer Aided Process Engineering. Escape-15, 29 May - 1 June, 2005, Barcelona, Spain. Computer-aided chemical engineering: European Symposium on Computer-aided process engineering-15.
20, 2005, Netherlands. Elsevier. pp. 859-864.
Refereed Conference or Book Articles int'l
2004
-
Riistama, J. & Lekkala, J.
Characteristic properties of implantable Ag/AgCl- and Pt-electrodes. Proceedings of the 26th Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBC 1-5 September, 2004, San Francisco, USA.
2004, pp. 2360-2363.
-
Syrjälä, S. & Kuikka, S.
Software agents in handling abnormal situations in industrial plants. In : Hamza, M. (ed.) : Proceedings of the Sixth IASTED International Conference on Intelligent systems and control, August 23-25, 2004, Honolulu, USA.
2004, pp. 7-12.
-
Vehkaoja, A. & Lekkala, J.
Wearable wireless biopotential measurement device. Proceedings of the 26th Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBC 1-5 September, 2004, San Francisco, USA.
2004, pp. 2177-2179.
-
Yli-Fossi, T., Kosonen, M. & Lautala, P.
Modelling of retention for a dynamic paper machine simulator. In: Hamza, M.H. (ed.). Proceedings of the IASTED International Conference Applied Simulation and Modelling, June 28-30,2004, Rhodes, Greece.
1, 2004, pp. 392-397.
Refereed Conference or Book Articles int'l
2003
-
Sundqvist, S., Pajula, E. & Ritala, R.
Risk Premium and Robustness in Design Optimization of Simplified TMP Plant. In: Gani, R. (advisory ed.) and Kraslawski, A. & Turunen, I. (eds.). European Symposium on Computer Aided Process Engineering-13. 36th European Symposium of the Working Party on Computer Aided Process Engineering. Computer-Aided Chemical Engineering, 14. Escape-13, 1-4 June, 2003, Lappeenranta, Finland. Elsevier Science B.V., 2003, Netherlands..
2003, 14, s. 311-316.
Non-Refereed Articles int'l
2011
-
Haapa-Aho, Jonne; Korpela, Timo; Björkqvist, Tomas; Hrdlicka, Jan; Placek, Viktor; Vrana, Stanislav; Sulc, Bohumil.
Continuous control issues concerning operation improvement of small-scale biomass boilers. In: Bittanti, S.; Cenedese, A.; Zampieri, S. (ed.). Preprints of the 18th IFAC World Congress, August 28 - September 2, 2011, Milano, Italy
2011, Milano. IFAC. 7035-7042.
-
Itävuo, Pekka; Jaatinen, Antti; Vilkko, Matti.
Simulation and advanced control of transient behaviour in gyratory cone crushers. In: Kracht, Willy; Kuyvenhoven, Romke; Lynch-Watson, Suzanna; Montes-Atenas, Gonzalo (ed.). 8th International Mineral Processing Seminar, Santiago, Chile, 30.11-2.12.2011
2011, Santiago. Gecamin. 63-72.
-
Konkarikoski, Kimmo.
Aspects of measurement strategy with dynamic programming. Proceedings of the 14th Joint International IMEKO TC1 + TC7 + TC13 Symposium Intelligent Quality Measurements-Theory, Education and Training, 31.8- 2.9.2011, Jena , Germany
2011, Budapest. IMEKO. 1-5.
-
Mettänen, Marja; Jukola, Matti; Miettinen, Arttu; Ihalainen, Heimo; Turpeinen, Tuomas; Timonen, Jussi.
Comparison of registered paper surface representations from microtomogaaphy and photometric stereo. In: Hirn, U. (ed.). Progress in Paper Physics Seminar 2011 Conference Proceedings, Graz, Austria, September, 5-8, 2011, Graz, Austria
2011, Graz. Technischen Universität Graz. 225-230. http://dx.doi.org/10.3217/978-3-85125-163-0.
-
Mickczinski, Manuel; Bartenwerfer, Malte; Saketi, Pooya; Heinemann, Sabine; Passas, Raphael; Kallio, Pasi; Fatikow, Sergej.
Towards automated manipulation and characterization of paper-making fibres and its components. In: Ander, P.; Bauer, W.; Heinemann, S.; Kallio, P.; Passas, R.; Treimanis, A. (ed.). Fine Structure of Papermaking Fibres: The Final Report of COST Action E54 "Characterization of the fine structure and properties of papermaking fibres using new technologies"
2011, 163-178.
-
Roinila, Tomi; Huovinen, Mikko; Vilkko, Matti; Helin, Tomi.
Continuous monitoring of industrial processes through cross-correlation techniques. In: Bittanti, S.; Cenedese, A.; Zampieri, S. (ed.). Preprints of the 18th IFAC World Congress, August 28 - September 2, 2011, Milano, Italy
2011, Milano. IFAC. 12171-12176.
-
Saketi, Pooya; Kallio, Pasi.
Measuring bond strengths of individual paper fibers using microrobotics. In: Hirn, U. (ed.). Progress in Paper Physics Seminar 2011 Conference Proceedings, Graz, Austria, September, 5-8, 2011, Graz, Austria
2011, Graz. Technischen Universität Graz. 199-203. http://dx.doi.org/10.3217/978-3-85125-163-0.
-
Saketi, Pooya; Kallio, Pasi.
Microrobotic platform for manipulation and mechanical characterization of individual paper fibres. In: Ander, P.; Bauer, W.; Heinemann, S.; Kallio, P.; Passas, R.; Treimanis, A. (ed.). Fine Structure of Papermaking Fibres: The Final Report of COST Action E54 "Characterization of the fine structure and properties of papermaking fibres using new technologies"
2011, 133-146.
-
Salmi, Ari; Salminen, Lauri; Montonen, Risto; Engberg, Birgitta; Björkqvist, Tomas; Häggström, Edward; Lucander, Mikael.
Cyclic impacting of wood creates localized fatigue. In: Zhang, M., Fang, G., Hay, G., Li, Z., Xu, Y., Lin, T. & Zhang, S. (ed.). Proceeding of International Mechanical Pulping Conference 2011, Xi'an, P. R. of China, June 26-29, 2011
2011, Xi'an, P. R. of China. Chinese Academy of Forestry; Shaanxi University of Science and Technology; Pulp and Paper Technical Association of Canada. China Light Industry Press. 92-95.
-
Taskinen, Aki; Vilkko, Matti; Itävuo, Pekka; Jaatinen, A.
Fast size distribution estimation of crushed rock aggregate using laserprofilometry. In: Bittanti, S.; Cenedese, A.; Zampieri, S. (ed.). Preprints of the 18th IFAC World Congress, August 28 - September 2, 2011, Milano, Italy
2011, Milano. IFAC. 12132-12137.
-
Vepsäläinen, Timo; Kuikka, Seppo.
Simulation assisted, model-based development of safety related interlocks. ICINCO 2011, 8th International Conference on Informatics in Control, Automation and Robotics, Noordwijkerhout, Netherlands, 28-31 Julý, 2011
2011, Noordwijkerhout. ICINCO. 266-275.
-
Vepsäläinen, Timo; Kuikka, Seppo.
Towards model-based development of safety-related control applications. ETFA'2011, 16th IEEE International Conference on Emerging Techniques and Factory Automation, Toulouse, France, September 5-9, 2011
2011, Piscataway, NJ. IEEE. 1-9. http://dx.doi.org/10.1109/ETFA.2011.6058979.
-
von Essen, Mathias; Hirvonen, Juha; Saketi, Pooya; Kallio, Pasi.
Automated Grasping in Manipulation of Individual Paper Fibers. Proceedings of the First International Conference on Manipulation, Manufacturing and Measurement on the Nanoscale 3M-NANO, Changchun, China, August 2011
2011, Changchun. 3M-Nano.
-
Yli-Fossi, Timo; Köykkä, Petri; Majanne, Yrjö.
A generalized dynamic water side model for a once-through Benson boiler. In: Bittanti, S., Cenedese, A. & Zampieri, S. (ed.). Preprints of the 18th IFAC World Congress, August 28 - September 2, 2011, Milano, Italy
2011, Milano. IFAC. 7049-7054.
Non-Refereed Articles int'l
2010
-
Placek, Viktor; Vrana, Stanislav; Hrdlicka, Jan; Haapa-aho, Jonne.
Ovlivneni kvality provozu malych kotlu moderni automatizaci. Automatizace, Regulace a Procesy, Prague, Czech Republic, 2-3.11, 2010
2010, 117-120.
-
Saketi, Pooya; Kallio, Pasi.
Flexibility measurement of individual paper fibers using microrobotics platform. Scientific Workshop, MC9 and WGs meeting COST Action E54, May 10-12, 2010, Coimbra, Portugal
2010, 18-20.
-
Vepsäläinen, Timo; Hästbacka, David; Kuikka, Seppo.
Simulation assisted model-based control develpoment- unifying UML AP and Modelica ML. In: Al-Akaidi Marwan (ed.). MESM' 2010, 11th Middle Eastern Simulation Multiconference Gameon-Arabia'2010, December 1-3, 2010, Alexandria, Egypt
2010, 43-50.
-
Yli-Fossi, Timo; Harju, Timo; Friman, Mats; Mäkinen Jukka; Lautala, Pentti.
Estimation of paper formation using recursive least squares method. Pulp & Paper Canada.
2010, September, 1-6.
Non-Refereed Articles int'l
2009
-
Engberg, B.A., Salminen, L.I., Salmi, A., Björkqvist,T. & Lucander, M.
On the importance of fatigue for the reological properties of wood. Proceedings of International Mechanical Pulping Conference 2009, Sundsvall, Sweden, May 31-June 4, 2009.
2009, pp. 239-244.
-
Hästbacka, D. & Kuikka, S.
A service oriented engineering approach to enhance the development of automation and control systems. ICEIS 2009, 11th International Conference on Enterprise Information Systems, Proceedings of Information Systems Analysis and Specification, Milan, Italy, May 6-10, 2009.
2009, pp. 219-224.
-
Huovinen, M. & Hietanen, V. & Harju, T.
Intelligent field devices in process monitoring. In : Escobet, T. et al. (eds.). Safe Process, 7th IFAC International Symposium on Fault Detection, Supervision and Safety of Technical Processes, Barcelona, Spain, 30th June - 3rd July, 2009.
2009, pp. 668-673.
-
Koponen, A., Vehkaoja, A. & Joro, R.
Automatic recognition of sector light colour boundaries. European Journal of Navigation.
7, 2009, 1, 45-51.
-
Post, O., Seppälä, J. & Koivisto, H.
Certificate based security at device level of automation system. DESDes'09, Preprints of 4th IFAC Wokshop on Discrete-Event System Design, Gandia Beach, Spain, 6-8 October, 2009.
2009, 5 p.
-
Post, O., Seppälä, J. & Koivisto, H.
The performance of OPC-UA security model at field device level. ICINCO 2009 6st International Conference on Informatics in Control, Automation and Robotics, 2-5 July, 2009, Milan, Italy.
2009, pp. 337-341.
-
Ruusunen, M. Korpela, T. & Björkqvist, T.
The effect of control parameters to the quality of small-scale wood pellet combustion. In: Savolainen, M. (ed.). Bioenergy 2009, Sustainable Bioenergy Business, 4th International Bioenergy Conference, Book of Proceedings, 31.8.-4.9.2009, Jyväskylä, Finland. FINBIO publication.
45, 2009, pp. 507-515.
-
Saari, V., Björkqvist, T., Engberg, B.A. & Saarenrinne, P.
Strain distribution in annual rings under compression by high speed photography. Proceedings of International Mechanical Pulping Conference 2009, Sundsvall, Sweden, May 31-June 4, 2009.
2009, pp. 245-251.
-
Saketi, Pooya.
Characterization and flexibility measurements of refined and unrefined Action E54 common pulps. Workshop Cost Action E54 "Impact of the Fibre Properties on the Quality of Final Product", October 8-9, 2009, Grenoble, France
2009,
-
Saketi, Pooya; Kallio, Pasi.
Microrobotics platform for characterization and treatment of single paper fibres. Workshop New Methods for Paper and Fibre Characterization, May 4-6, 2009, Tampere, Finland
2009, 41-52.
-
Vepsäläinen, T., Hästbacka, D. & Kuikka, S.
A model-driven tool environment for automation and control application development - transformation assisted, extendable approach. In: Peltonen, J. (ed.). SPLST'09 & NW-MODE'09, Proceedings of 11th Symposium on Programming Languages and Software Tools and 7th Nordic Workshop on Model Driven Software Engineering, 26-28.8.2009, Tampere, Finland. Tampere University of Technology. Department of Software System. Report.
5, 2009, pp. 315-329.
Non-Refereed Articles int'l
2008
-
Hannelius, T., Salmenperä, M. & Kuikka, S.
Roadmap to adopting OPC UA. Proceedings of IEEE INDIN 2008, 6th International Conference on Industrial Informatics, July 13-16, 2008, Daejon, Korea.
2008, http://dx.doi.org/10.1109/INDIN.2008.4618203.
-
Heiskanen, V., Kallio, P. & Marjanen, K.
Machine vision based measurement of dynamic contact angle in microchannel flows. Proceedings of 6th International ASME Conference on Nanochannels, Microchannels and Minichannels ICNMM2008, June 23-25, 2008, Darmstadt, Germany.
2008, 8 p.
-
Konkarikoski, K. & Alonso, A.
Dynamic verification for soft sensor applications. 2008 Control Systems Pan-Pacific Conference. Conference Proceedings, June 16-18, Vancouver, Canada, 2008.
2008, p. 9-14.
-
Konkarikoski, K. & Ritala, R.
Optimization of measurement strategy. In: Benoit, E. (ed.). Proceedings of the 12th IMEKO TC1 & TC7 Joint Symposium on Man Science & Measurement, (TC1 - Education and Training in Measurement and Instrumentation; TC7 - Measurement Science), September 3-5, 2008, Aunecy, France.
2008, p. 219-224.
-
Korpela, T.
Combustion control of small scale wood chip and pellet fired systems. Biomass & Bioenergy Conference 2008, 27-29 February 2008, Tallinn, Estonia.
2008, 6 p.
-
Korpela, T., Björkqvist, T. & Lautala, P.
Durable feedback control systen for small scale wood chip combustion. Proceedings of World Bioenergy 2008, Conference & Exhibition on Biomass for Energy, 27-29 May 2008, Linköping, Sweden.
2008, pp. 224-230.
-
Kumpulainen, P, & Hätönen, K.
Compression of cyclic time series data. In: Benoit, E. (ed.). Proceedings of the 12th IMEKO TC1 & TC7 Joint Symposium on Man Science & Measurement, (TC1 - Education and Training in Measurement and Instrumentation; TC7 - Measurement Science), September 3-5, 2008, Aunecy, France.
2008, p. 413-419.
-
Laurikkala, M. & Koivisto, H.
Power study of statistical tests for network traffic change detection. In: Luzar-Stiffler, V. et al. (eds.). Proceedings of the ITI2008 30th International Conference on Information Technology Interfaces, June 23-26, 2008, Dubrovnik, Croatia.
2008, pp. 361-366.
-
Lucander, M., Salminen, L.I, Saharinen, E. & Björkqvist, T.
Modeling as a Powerful Tool in Developing Mechanical Pulping towards energy efficiency. Zellcheming-Expo- Exhibition accompanying the Annual General Meeting of ZELLCHEMING 2008, June 24-26,2008, Wiesbaden, Germany.
2008,
-
Lucander, M., Salminen, L., Saharinen, E. & Björkqvist, T.
Modeling as a powerful tool in developing mechanical pulping towards energy efficiency. IPW, the Magazine for the International Pulp and Paper Industry.
2008, 12/2008, pp. 44-49.
-
Ptak, P., Mäkelä, M., Hiertner, M., Ritala, R., Kokko, T. & Kauranne, T.
Dual data set of traversing on-line scans and high resolution ATPA analysis for studying CD/MD separation on paper machines. 2008 Control Systems Pan-Pacific Conference. Conference Proceedings, June 16-18, Vancouver, Canada, 2008.
2008, p. 99-103.
-
Pulkkinen, P., Hytönen, J. & Koivisto, H.
Detection of safe and harmful bioaerosols by means of fuzzy classifiers. In: Chung, M.J. et al. (eds.). IFAC 17th World Congress, July 6-11, 2008, Seoul, Korea.
2008, pp. 12085-12812.
-
Pulla, J., Mettänen, M., Konkarikoski, K. & Ritala, R.
Bayesian network model as an overall image quality measurement system. In: Benoit, E. (ed.). Proceedings of the 12th IMEKO TC1 & TC7 Joint Symposium on Man Science & Measurement, (TC1 - Education and Training in Measurement and Instrumentation; TC7 - Measurement Science), September 3-5, 2008, Aunecy, France.
2008, p. 67-73.
-
Ropponen, A. & Ritala, R.
Optimal measurement scheduling and design with dynamic programming. In: Benoit, E. (ed.). Proceedings of the 12th IMEKO TC1 & TC7 Joint Symposium on Man Science & Measurement, (TC1 - Education and Training in Measurement and Instrumentation; TC7 - Measurement Science), September 3-5, 2008, Aunecy, France.
2008, p. 359-365.
-
Ropponen, A. & Ritala, R.
Towards coherent quality management with Bayesian network quality model and stochastic dynamic optimization. 2008 Control Systems Pan-Pacific Conference. Conference Proceedings, June 16-18, Vancouver, Canada, 2008.
2008, p. 177-181.
-
Salminen, L., Svensson, B., Björkqvist, T., Saharinen, E., Salmi, A. & Lucander, M.
Propagation of wood fatigue. Proceedings of 6th Fundamental Mechanical Pulp Research Seminar, 22 May, 2008, Espoo, Finland.
2008, 9 p.
-
Salo, T. & Björkqvist, T.
Grey box modeling of wood grinding. Proceedings of 6th Fundamental Mechanical Pulp Research Seminar, 22 May, 2008, Espoo, Finland.
2008, 10 p.
-
Vepsäläinen, T., Hästbacka, D. & Kuikka, S.
Tool support for the UML automation profile - for domain-specific software development in manufacturing. The Third International Conference on Software Engineering Advances, ICSEA 2008, 26-31 October, 2008, Sliema, Malta.
2008, pp. 43- 50. http://dx.doi.org/10.1109/ICSEA.2008.22.
-
Vilkko, M. & Roinila, T.
Designing maximum length sequence signal for frequency response measurement of switched mode converters. NORPIE/2008, Nordic Workshop on Power and Industrial Electronics, June 9-11, 2008, Espoo, Finland.
2008, 6 p.
-
Vilkko, M. & Roinila, T.
Improved frequency response measurement of switched-mode converters using cross-correlation methods. Proceedings of 2008 CACS International Automatic Control Conference, November 21-23, 2008, Tainan, Taiwan.
2008,
-
Yli-Fossi, T., Harju, T., Friman, M., Mäkinen, J. & Lautala, P.
Estimation of paper formation using recursive least squares method. 2008 Control Systems Pan-Pacific Conference, June 16-18, 2008, Vancouver, Canada.
2008, pp. 213-218.
-
Ylisaari, J., Konkarikoski, K., Ritala, R., Kokko, T. & Mäntylä, M.
Scanner path as a manipulatable variable for optimal control and diagnostics of CD variations. 2008 Control Systems Pan-Pacific Conference. Conference Proceedings, June 16-18, Vancouver, Canada, 2008.
2008, p. 81-85.
Non-Refereed Articles int'l
2006
-
Huovinen, M. & Hietanen, V.
Monitoring and diagnosis of large scale industrial systems. 6th IFAC Symposium on Fault Detection, Supervision and Safety of Technical Processes, Beijing, China, August 30 - September 1, 2006.
2006, p. 184.
-
Kärki, S. & Lekkala, J.
Pressure mapping system for physiological measurements. IMEKO XVIII World Congress and IV Brazilian Congress of Metrology. Metrology for a sustainable development. 17-22 September 2006, Rio de Janeiro, Brazil.
2006, 5 p.
-
Konkarikoski, K. (Latva-Käyrä, K.) & Ritala, R.
Optimizing a measurement setup for decision making. IMEKO XVIII World Congress and IV Brazilian Congress of Metrology. Metrology for a sustainable development. 17-22 September 2006, Rio de Janeiro, Brazil.
2006, 6 p.
-
Korpela, T. , Björkqvist, T. & Lautala, P.
Modelling of wood pellet combustion for control purposes. Proceedings of 2nd World Conference on Pellets, Jönköping, Sweden, 30 May - 1 June, 2006.
2006, pp. 97-104.
-
Lähdekorpi, M., Ihalainen, H. & Ritala, R.
Using image registration and alignment to compare alternative 2D measurements. IMEKO XVIII World Congress and IV Brazilian Congress of Metrology. Metrology for a sustainable development. 17-22 September 2006, Rio de Janeiro, Brazil.
2006, 6 p.
-
Lautala, P.
Simulators as versatile tools for automation. VII International Scientific and Technical Conference, New Information Scientific and Technical Conference, New Information Techonologies in Pulp and Paper Industry and Energetics, 2006, Petrozavodsk, Russia.
2006, pp. 7-8.
-
Lekkala, J., Salpavaara, T. & Kärki, S.
EMFI - versatile material for monitoring of human functions. IMEKO XVIII World Congress and IV Brazilian Congress of Metrology. Metrology for a sustainable development. 17-22 September 2006, Rio de Janeiro, Brazil.
2006, 6 p.
-
Majanne, Y.
Simulation as a tool for process design and disturbance analysis in industrial power plants. IFAC Symposium on Power Plants and Power Systems Control, June 25-28 2006, Kananaskis, Canada.
2006, 6 p.
-
Mäkiranta, J. & Lekkala, J.
Optimization of a novel magnetic nanoparticle sensor. IMEKO XVIII World Congress and IV Brazilian Congress of Metrology. Metrology for a sustainable development. 17-22 September 2006, Rio de Janeiro, Brazil.
2006, 4 p.
-
Österberg, P., Ihalainen, H. & Ritala, R.
Measurement of wood quality parameters from annual rings using color analysis with digital images. IMEKO XVIII World Congress and IV Brazilian Congress of Metrology. Metrology for a sustainable development. 17-22 September 2006, Rio de Janeiro, Brazil.
2006, 6 p.
-
Palmroth, L. & Putkonen, A.
Work cycle recognition in human operated machines using hidden Markov models. The 8th International Conference on Motion and Vibration Control, (MOVIC 2006), August 27-30, 2006, KAIST, Daejeon, Korea.
2006, pp. 459-464.
-
Pulkkinen, P. & Koivisto, H.
A new hybrid method for identification of fuzzy models. 2006 IEEE World Congress on Computational Intelligence, Vancouver, Canada, July 16-21, 2006.
2006, pp. 7886-7893.
-
Pulkkinen, P., Vesterinen, T. & Ritala, R.
Dynamic simulation of stochastic low-dimensional systems: operational decision support applications. In: Juuso, E. (ed.). SIMS 2006. Proceedings of the 47th Conference on Simulation and Modelling, 27-29 September 2006, Helsinki, Finland.
2006, p. 56-61.
-
Ritala, T., Kallio, P. & Kuikka, S.
Real-time motion control software for a micromanipulator. Proceedings of IFAC Workshop on Programmable Devices and Embedded Systems, PDeS 2006, Brno, Czech Republic, February 14-16, 2006.
2006, pp. 304-309.
-
Vehkaoja, A. & Lekkala, J.
Wireless measurement band for EEG mismatch negativity registration in mobile activities. IMEKO XVIII World Congress and IV Brazilian Congress of Metrology. Metrology for a sustainable development. 17-22 September 2006, Rio de Janeiro, Brazil.
2006, 4 p.
-
Viinikkala, M. & Kuikka, S.
Service oriented semantics in industrial operation and maintenance. In: Dolgui, A. et al. (eds). Preprints of INCOM'2006, 12th IFAC Symposium on Information Control Problems in Manufacturing, Saint-Etienne, France, May 17-19, 2006.
2, 2006, pp. 39-44.
-
Viinikkala, M. , Syrjälä, S. & Kuikka, S.
A maintenance demand analyzer - a web service based on a semantic plant model. INDIN'06, IEEE International Conference on Industrial Informatics, Singapore, 16-18 August 2006.
2006, pp. 486-491.
Non-Refereed Articles int'l
2005
-
Artell, T., Koivisto, H., Seppälä, J. & Ruohonen, T.
Quality of service in network-based automation. In : Horacek, P., Simandl, M. & Zitek, P. (eds) :Preprints of the 16th IFAC World Congress, Prague, Czech Republic, July 3-8, 2005.
2005, 5 p.
-
Kärki, S., Honkala, M., Cluitmans, L., Cömert, A., Hännikäinen, J., Mattila, J., Meinander, H., Peltonen, P., Piipponen, K., Tieranta, T., Väätänen, A., Hyttinen, J., Lekkala, J., Sepponen, R., Vanhala, J & Mattila, H.
Smart fire suit increasing occupational safety. In: Holmér, I., Kuklane, K. & Gao, C. (eds.). Environmental Ergonomics XI, Proceedings of the 11th International Conference, 22-26 May, 2005, Ystad, Sweden.
2005, 15, pp. 438-441.
-
Kärki, S., Lekkala, J., J., Honkala, M., Peltonen, P., Mattila, H., Cluitmans, L., Mattila, J., Väätänen, A., Cömert, A., Hyttinen, J., Hännikäinen, J., Tieranta, T., Vanhala, J., Piipponen, K. & Sepponen, R.
Smart clothing for firefighters. In: Talvenmaa, P. (ed.). Ambience 05, International Scientific Conference, Intelligent Ambience and Well-Being, 19-20 September 2005, Tampere, Finland.
2005, pp. 221-229.
-
Lehto, T., Koivisto, H., Ekola, T. & Laurikkala, M.
Performance of nonlinear queue management algorithms in best-effort networks. In : Horacek, P., Simandl, M. & Zitek, P. (eds) :Preprints of the 16th IFAC World Congress, Prague, Czech Republic, July 3-8, 2005.
2005, 6 p.
-
Loisa, M. & Halttunen, J.
Quality control of TMP refining line based on freeness soft sensor. IMOC 2005. International Mechanical Pulping Conference. Proceedings. 7-9 June 2005, Oslo, Norway.
2005, pp. 306-309.
-
Lucander, M. & Björkqvist, T.
New approach on the fundamental defibration mechanisms in wood grinding. Proceedings of the IMPC 2005, International Mechanical Pulping Conference, 7-9 June 2005, Oslo, Norway.
2005, pp. 149-155.
-
Majanne, Y. & Lautala, P.
Model predictive fault tolerance control scheme. 1st NeCST Workshop , Networked Control Systems & Fault Tolerant Control, Ajaccio, France, October 6-7, 2005.
2005, pp. 225-229.
-
Rantala, J. & Koivisto, H.
Production planning under stochastic time-varying demand : flexible service level approach. In : Horacek, P., Simandl, M. & Zitek, P. (eds) :Preprints of the 16th IFAC World Congress, Prague, Czech Republic, July 3-8, 2005.
2005, 6 p.
-
Rasku, H. & Koivisto, H.
Inventory management in high uncertainty environment with model reference control. In : Horacek, P., Simandl, M. & Zitek, P. (eds) :Preprints of the 16th IFAC World Congress, Prague, Czech Republic, July 3-8, 2005.
2005, 6 p.
-
Seppälä, J. & Salmenperä, M.
Intelligent visualisation of process state using service oriented architecture. In : Horacek, P., Simandl, M. & Zitek, P. (eds) :Preprints of the 16th IFAC World Congress, Prague, Czech Republic, July 3-8, 2005.
2005, 6 p.
-
Vehkaoja, A., Verho, J., Lekkala, J., Puurtinen, M., Nöjd, N. & Hyttinen, J.
Wireless input device for hands-free computer-human interaction. In: Talvenmaa, P. (ed.). Ambience 05, International Scientific Conference, Intelligent Ambience and Well-Being, 19-20 September 2005, Tampere, Finland.
2005, 5 p.
-
Vehviläinen, P.
Data mining for digital mobile telecommunication network's quality of service performance measurements. In : Horacek, P., Simandl, M. & Zitek, P. (eds) :Preprints of the 16th IFAC World Congress, Prague, Czech Republic, July 3-8, 2005.
2005, 6 p.
-
Veijalainen, J., Berki, E., Lehmonen, J. & Moisanen, P.
Implementing a new international paper mill efficiency standard - using computational correctness criteria to model and verify timed events. In: Eleftherakis, G. & Zdravkova, K. (eds.). Proceedings of SEEFMo5 - 2nd South-East European Workshop on Formal Methods, Practical dimensions: Challenges in the business world, 17-19 November, 2005, Ohrid, Former Yugoslavian Republic of Macedonia.
2005, 16 p.
-
Viinikkala, M., Jaakkola, V.-P. & Kuikka, S.
Value added web services for industrial operations and maintenance. Proceedings of the ICEIS 2005, 7th International Conference on Enterprise Information Systems, Miami, U.S.A, May 25-28, 2005.
1, 2005, pp. 361-365.
-
Yli-Fossi, T. & Lautala, P.
An adaptive ratio control solution for a water cooling system in a wire rod mill. In: Hamza, M. (ed.). Proceedings of the 24th IASTED International Conference Modelling, Identification and Control, 16.-18.2.2005, Innsbruck, Austria.
2005, pp. 229-234.
Non-Refereed Articles int'l
2004
-
Asikainen, S., Loisa, M., Luntta, E. & Halttunen, J.
Prediction of Machine Stock and Paper Sheet Properties with On-Line Pulp Quality Measurements. Proceedings - Preprints. Control Systems 2004 Conferences, 14-18 June, 2004, Quebec City Quebec, Canada.
2004, Montreal, QC, Canad. s. 237-240.
-
Belle, J., Kappen, J., Goedsche, F., Kuehrt, H.-A., Ritala, R., Dahlquist, E., Dhak, J. & Mosher, A.
Simulation-based control of the sizing rate of resin sized paper. 16. PTS-Symposium 2004, Chemische Technologie der Papierherstellung, 16th PTS Symposium Chemical Technology in Papermaking, 15-17 September, 2004, Munich, Germany.
2004, 21, 17+13 s.
-
Björkqvist, T., Lucander, M. & Salerma, M.
Response of mechanical treatment on fresh wood. Proceedings of the 4th Fundamental Mechanical Pulp Seminar, June 7-8, 2004, Stocholm, Sweden.
2004, Stocholm. STFI-Packforsk. 9 s.
-
Ekola, T., Laurikkala, M., Lehto, M. & Koivisto, H.
Network traffic analysis using clustering ants. In: Jamshidi, M. et al. (eds). World Automation Congress : Advances in Robotics, Manufacturing, Automation, Control, Soft Computing, Multimedia, Biomedicine, Image Processing and Financial Engineering, June 28-July 1, 2004, Seville, Spain.
4, 2004, 6 p.
-
Ekola, T., Lehto, T., Laurikkala, M. & Koivisto, H.
Capturing time-varying characteristics of network traffic with cooperative ants. In : Koucheryavy, Y., Harju, J. & Koucheryavy, A. (Eds.). Proceedings of NEW2AN 2004; Next Generation Teletraffic and Wired/Wireless Advanced Networking, Feb 02-06, 2004, St. Petersburg, Russia.
2004, s. 87-94.
-
Helanterä, H., Salmenperä, M. & Koivisto, H.
Global condition monitoring system: implementing Matlab-based analysis services. Proceedings of ICINCO 2004, First International Conference on Informatics in Control , Automation and Robotics, August 25-28, 2004, Setubal, Portugal.
1, 2004, pp. 300-305.
-
Jokinen, H. & Ritala, R.
Value assessment of measurements in large measurement information systems. In: Kayafas, E. & Loumos, V. (eds). IMEKO TC-4. Proceedings of the 13th International Symposium on Measurements for Research and Industry Applications and the 9th European Workshop on ADC Modelling and Testing, 29.9-1.10. 2004, Athens, Greece.
1, 2004, pp. 367-372.
-
Kappen, J., Dahlquist, E., Manninen, J., Negro, C. & Ritala, R.
A big leap forward - the new European cost action E 36 "Modelling and simulation in the pulp & paper industry". In: Elmegaard, B., Sporring, J., Erleben, K. & Sorensen, K. (eds). Proceedings of SIMS 2004. 45th International Conference of Scandinavian Simulation Society, 23-24 September, 2004, Copenhagen, Denmark.
2004, pp. 53-57.
-
Kokko, T., Korpela, T., Huhtelin, T., Lautala, P. & Kaunonen, A.
Development of papermaking process based on integrated process and control design. Control Systems 2004 Conference preprints, June 14-18, 2004, Quebec, Canada.
2004, Canada. s. 219-226.
-
Kokko, T., Saarinen, I., Huhtelin, T. & Lautala, P.
Empirical model for classifying importance of automation changes on paper machine performance. In : Hamza, M. H. (ed.) : Modeling, identification and control conference, February 23-25, 2004, Grindelwald, Switzerland.
2004, s. 369-374.
-
Kuncova, J. & Kallio, P.
Challenges in capillary pressure microinjection. 26th International Conference of the IEEE Engineering in Medicine and Biology Society, 1.-5.9.2004, San Francisco, USA.
2004, pp. 4998-5001.
-
Laitinen, O., Pohjanen, L. & Kuikka, S.
Using of web based learning environments in the control education at the Tampere University of Technology. IBCE'04, Second IFAC Workshop on Internet Based Control Education, Sept. 5-7, 2004, Grenoble, France.
2004, 6 p.
-
Latva-Käyrä, K.
Dynamic Calibration of On-Line Consistency Measurement. Proceedings - Preprints. Control Systems 2004 Conferences, 14-18 June, 2004, Quebec City Quebec, Canada.
2004, Montreal, QC, Canad. s. 265-268.
-
Latva-Käyrä, K. & Ritala, R.
Systems identification scheme for stochastic bistable process. ISITA 2004 - International Symposium on Information Theory and its Applications, 10-13 October, 2004, Parma, Italy.
2004, pp. 733-736.
-
Laurikkala, M. & Koivisto, H.
Elephant flows snatch a lion's share of network capacity. In : Koucheryavy, Y., Harju, J. & Koucheryavy, A. (Eds.). Proceedings of NEW2AN 2004; Next Generation Teletraffic and Wired/Wireless Advanced Networking, Feb 02-06, 2004, St. Petersburg, Russia.
2004, s. 70-75.
-
Lehto, T., Laurikkala, M., Ekola, T. & Koivisto, H.
Behavior and performance of fuzzy-RED AQM algorithm in best-effort networks. In : Koucheryavy, Y., Harju, J. & Koucheryavy, A. (Eds.). Proceedings of NEW2AN 2004; Next Generation Teletraffic and Wired/Wireless Advanced Networking, Feb 02-06, 2004, St. Petersburg, Russia.
2004, s. 150-155.
-
Loisa, M., Nybom, H., Kortelainen, J., Jakobsson, J. & Tukiainen, K.
Freeness Soft Sensor in TMP-Refining. Proceedings - Preprints. Control Systems 2004 Conferences, 14-18 June, 2004, Quebec City Quebec, Canada.
2004, Montreal, QC, Canad. s. 227-231.
-
Lukkari, M., Karjalainen, M., Sarkanen, R., Linne, M.-L., Jalonen, T. & Kallio, P.
Electrical detection of the contact between a microinjection pipette and cells. 26th International Conference of the IEEE Engineering in Medicine and Biology Society, 1.-5.9.2004, San Francisco, USA.
2004, pp. 2557-2560.
-
Österberg, P., Ihalainen, H. & Ritala, R.
Method for analyzing and classifying wood quality through local 2D-spectrum of digital log end images. Proceedings of International Conference on Advanced Optical Diagnostics in Fluids, Solids and Combustion, VSJ-SPIE '04, 4-6 December, 2004, Tokyo, Japan.
2004, Japan. 8 p.
-
Palmroth, L. & Hölttä, V.
Rapid control prototyping in test sequence design for condition monitoring of a hydraulic valve. In: Drews, P. (ed.). IEEE Conference on Mechatronics and Robotics, 2004, Aachen , Germany.
2004, pp. 218-223.
-
Pulkkinen, P. & Ritala, R.
Methods for handling uncertainties in dynamic simulation and optimization: case TMP plant. In: Elmegaard, B., Sporring, J., Erleben, K. & Sorensen, K. (eds). Proceedings of SIMS 2004. 45th International Conference of Scandinavian Simulation Society, 23-24 September, 2004, Copenhagen, Denmark.
2004, pp. 111-116.
-
Pulkkinen, P., Ritala, R., Mosher, A. & Tienari, M.
Designing Operator Decision Support System for TMP Production Based on Dynamic Simulation and Optimization. Proceedings - Preprints. Control Systems 2004 Conferences, 14-18 June, 2004, Quebec City Quebec, Canada.
2004, Montreal, QC, Canad. s. 215-218.
-
Pulkkinen, P., Ritala, R., Tienari, M. & Mosher, A.
Methodology for dynamic optimisation based on simulation. In: Kappen, J. & Bienert, C. (eds.). Cost - PTS Symposium. The Paper Technology Specialists. Forschung und Beratung für die Papierwirtschaft. Manuskript, PK441, Simulation and Process Control for the Paper Industrie. PTS, 9-10 March, 2004, München, Germany.
2004, 441, Germany. s. 15/1-12.
-
Rasku, H., Rantala, J. & Koivisto, H.
Model reference control in inventory and supply chain management- the implementation of a more suitable cost function. ICINCO 2004 1st International Conference on Informatics in Control, Automation and Robotics, August 25-28,2004, Setubal, Portugal.
1, 2004, pp. 129-134.
-
Ritala, R., Belle, J., Holmström, K., Ihalainen, H., Ruiz, J., Suojärvi, M. & Tienari M.
Operations Decision Support based on Dynamic Simulation and Optimization. Proceedings of Efficiency, PulPaper 2004, Conferences, - Energy, Coating, Efficiency - . The Finnish Paper Engineers´ Associaton - PI. 1-3 June, 2004, Helsinki, Finland.
2004, s. 55-62.
-
Ronkanen, P., Kallio, P. , Vilkko, M. & Koivo, H., N.
Self heating of piezoelectric actuators. measurement and compensation. Proceedings of the IEEE 2004 International Symposium on Micro-NanoMechatronics and Human Science, 31.10.-3.11.2004, Nagoya, Japan.
2004, pp. 313-318.
-
Vesterinen, T. & Ritala, R.
Data Analysis of Stochastic Bistable Systems: Applications to Biological Water Treatment Plant Model and Paper Mill Data. Proceedings - Preprints. Control Systems 2004 Conferences, 14-18 June, 2004, Quebec City Quebec, Canada.
2004, Montreal, QC, Canad. s. 245-249.
-
Zhou, S. & Halttunen, J.
Application of electrical impedance tomography in pulp flow measurement. IMEKO TC9. Proceedings of ICFM´2004, the 12th International Conference on Flow Measurement. Guilin, China, September 14-17, 2004.
2004, 2004-L0030, pp. 645-650.
Non-Refereed Articles int'l
2003
-
Asikainen, S., Loisa, M., Kortelainen, J. & Seppälä, V.
Imaging in Disturbance Analysis of Second Stage Pulp Refining. In: Ilic, D., Borsic, M., & Butorac, J. (eds). XVII IMEKO World Congress. Metrology in the 3rd Millennium. Book of Summaries. Proceedings. June 22-27, 2003, Dubrovnik, Croatia. HMD - Croatian Metrology Society, Zagreb, Croatia.
2003, s. 225-228.
-
Aumala, O.
Networking for Measurement Education. In: Ilic, D., Borsic, M., & Butorac, J. (eds). XVII IMEKO World Congress. Metrology in the 3rd Millennium. Book of Summaries. Proceedings. June 22-27, 2003, Dubrovnik, Croatia. HMD - Croatian Metrology Society, Zagreb, Croatia.
2003, s. 60-63.
-
Jokinen, H.
A Method to Detect Sudden Changes in Signals. In: Ilic, D., Borsic, M., & Butorac, J. (eds). XVII IMEKO World Congress. Metrology in the 3rd Millennium. Book of Summaries. Proceedings. June 22-27, 2003, Dubrovnik, Croatia. HMD - Croatian Metrology Society, Zagreb, Croatia.
2003, s. 808-812.
-
Kokko, T., Lautala, P. & Huhtelin, T.
Control of paper moisture using impingement drying. Hamza, M. (ed.) : Proc. of the 22nd IASTED International Conference on Modelling, Identification and Control, February 10-13, Innsbruck, Austria.
2003, IASTED. s. 268-274.
-
Kumpulainen, P., Hätönen, K. & Vehviläinen, P.
Automatic Discretization in Preprocessing for Data Analysis in Mobile Network. In: Ilic, D., Borsic, M., & Butorac, J. (eds). XVII IMEKO World Congress. Metrology in the 3rd Millennium. Book of Summaries. Proceedings. June 22-27, 2003, Dubrovnik, Croatia. HMD - Croatian Metrology Society, Zagreb, Croatia.
2003, s. 813-815.
-
Lahti, M., Marjanen, K. & Ihalainen, H.
Detection and Classsication of Air Bubble Silhouettes in PIV-IMAGES. In: Ilic, D., Borsic, M., & Butorac, J. (eds). XVII IMEKO World Congress. Metrology in the 3rd Millennium. Book of Summaries. Proceedings. June 22-27, 2003, Dubrovnik, Croatia. HMD - Croatian Metrology Society, Zagreb, Croatia / www.hmd.hr/imeko..
2003, s. 1365-1368.
-
Latva-Käyrä, K.
Dynamic On-Line Measurement Validation using Laboratory Measurements. 2003 International Mechanical Pulping Conference. June, 2003, Quebec City, Kanada. Publications Administrator: PAPTAC, Montreal, QC., Canada, 2003.
2003, Kanada. s. 209-212.
-
Lekkala, J., Tuppurainen, J. & Paajanen, M.
Material and Operational Properties of Large-Area Membrane Type Sensors for Smart Environments. In: Ilic, D., Borsic, M., & Butorac, J. (eds). XVII IMEKO World Congress. Metrology in the 3rd Millennium. Book of Summaries. Proceedings. June 22-27, 2003, Dubrovnik, Croatia. HMD - Croatian Metrology Society, Zagreb, Croatia.
2003, s. 2045-2048.
-
Loisa, M., Asikainen, S., Lassila, E., Härkönen, E., Kortelainen, J. & Vuorio, P.
Visualization of TMP Refining Process. 2003 International Mechanical Pulping Conference. June 2.-5., 2003, Quebec City, Kanada. Publications Administrator: PAPTAC, Montreal, QC., Canada, 2003.
2003, Kanada. s. 259-263.
-
Luntta, E., Nystedt, H. & Halttunen, J.
120: Experiences of Pulp Flow Measurements with Electromagnetic Flowmeters. Chapter 9. Electromagnetic meters. FLOMEKO 2003. The 11th Flomeko Conference, Groningen, Netherlands, 12-14 May, 2003.
2003, Netherland. s. 93-99.
-
Maijala, J., Keitamo, J., Grön, J. & Kettunen, L.
Modeling and simulation of the electric field and particle trajectories in simultaneous two-sided dry surface treatment of paper. 2003 TAPPI 8th Advanced Coating Fundamentals Symposium, May 8-10, 2003, Chicago, USA.
2003, s. 1-9.
-
Maijala, J., Putkisto, K. & Grön, J.
Coating layer formation in dry surface treatment of paper substrates. 11th International Coating Science and Technology Symposium, September 23-25, 2003, Minneapolis, Mnnesota USA.
2003, s. 67-72.
-
Mäkilä, P.
Optimal approximation and model quality estimation for nonlinear systems. 13th IFAC Symposium on System Identification, SYSID 2003, Rotterdam, Netherland, August 27-29, 2003.
2003, s. 1904-1909.
-
Palmroth, L.
Rapid control prototyping of forest machine functions. Gregersen, L. (ed.) : Proc. of Nordic Matlab Conference, Copenhagen, Den mark, October 21-22, 2003.
2003, s. 91-96.
-
Pulkkinen, P., Ihalainen, H. & Ritala, R.
Developing Simulation Models for Dynamic Optimization. Proceedings from 44th Scandinavian Conference On Simulation and Modeling. Scandinavian Simulation Society SIMS 2003. Västerås, Sweden, September 18-19, 2003.
2003, s. 57-62.
-
Putkisto, K., Maijala, J., Grön, J. & Rigdahl, M.
Polymer coating of paper using dry surface treatment : coating structure and performance. TAPPI 2003 9th European PLACE Conference Abstract Book, May 12-14,2003, Rome, Italy.
2003, 20 s.
-
Putkisto, K., Maijala, J., Grön, J & Rigdahl, M.
Thermomechanical properties of the polymer binded affecting the processability, structure and properties of dry surface treated papers. 2003 TAPPI 8th Advanced Coating Fundamentals Symposium, May 8-10, Chicago, USA.
2003, ss. 9-18.
-
Pykälä, H., Savia, M. & Koivo, H. N.
Chemical microplant. In: Lindfors, J. (Ed.). ACE 2003, the 6th IFAC Symposium on advances in control education, 16-18 June 2003, Oulu, Finland.
2003, Finland. s. 251-256.
-
Rask, O. & Kuikka, S.
eLearning for batch control. In: Lindfors, J. (Ed. by). ACE 2003, 6th IFAC Symposium on Advances in Control Education, 16-18 June 2003, Oulu, Finland.
2003, pp. 119-124.
-
Ronkanen, P., Kallio, P., Zhou, Q. & Koivo, H.
Current control of piezoelectric actuators with environmental compensation. Proc. of MICRO.tec 2003, 2nd VDE World Microtechnologies Congress, October 13-15,2003, Munich, germany.
2003, VDE Verlag. s. 323-326.
-
Söderholm, K. & Suomela, T.
A Toolbox for Mobile Phone Lighting Quality Analysis. In: Gregersen, L. (ed). Nordic Matlab Conference. Proceedings. October 21-22, 2003, Copenhagen, Denmark. COMSOL A/S, Soborg.
2003, s. 243-246.
-
Timonen, T. & Halttunen, J.
Effect of Variations in a Pulp Flow on Sampling and Process Measurements. In: Ilic, D., Borsic, M., & Butorac, J. (eds). XVII IMEKO World Congress. Metrology in the 3rd Millennium. Book of Summaries. Proceedings. June 22-27, 2003, Dubrovnik, Croatia. HMD - Croatian Metrology Society, Zagreb, Croatia.
2003, s. 1369-1372.
-
Vehviläinen, P., Hätönen, K. & Kumpulainen, P.
Data Mining in Quality Analysis of Digital Mobile Telecommunications Network. In: Ilic, D., Borsic, M., & Butorac, J. (eds). XVII IMEKO World Congress. Metrology in the 3rd Millennium. Book of Summaries. Proceedings. June 22-27, 2003, Dubrovnik, Croatia. HMD - Croatian Metrology Society, Zagreb, Croatia.
2003, s. 684-688.
-
Viinikkala, M. & Kuikka, S.
Integrating automation design information with XML. ICEIS 2003, Fifth International Conference on Enterprise Information Systems, Angers, France, April 23-26, 2003.
1, 2003, s. 582-587.
-
Viljamaa, P., Koivo, H. & Peltomaa, A.
Adaptive feed control of a forest harvester. In: Parkin, R.M. et al. (Eds.). ICOM 2003, International Conference on Mechatronics, Loughborough, UK.
2003, s. 235-240.
-
Wei, X. & Lautala, P.
Modeling and control design of a laboratory scale helicopter. In: Hamza, M.H. (Ed.). Applied Simulation and Modelling, Proceedings of the 12th IASTED International Conference, September 3-5, 2003, Marbella, Spain.
2003, s. 466-471.
-
Zhou, S. & Halttunen, J.
Consitency Profile Measurement in Pulp Based on Electrical Impedance Tomography. In: Ilic, D., Borsic, M., & Butorac, J. (eds). XVII IMEKO World Congress. Metrology in the 3rd Millennium. Book of Summaries. Proceedings. June 22-27, 2003, Dubrovnik, Croatia. HMD - Croatian Metrology Society, Zagreb, Croatia.
2003, s. 1157-1160.
-
Zhou, S. & Halttunen, J.
Monitoring of Air Bubbles in Pulp Flow based on Electrical Impedance Tomography. Proceedings of 3rd World Congress on Industrial Process Tomography. Banff, Canada, September 2-5, 2003.
2003, s. 157-162.
Books and Reports int'l
2011
Books and Reports int'l
2010
Books and Reports int'l
2009
Books and Reports int'l
2006
Refereed Journal Articles (Finland)
2010
-
Saarikoski, Heli; Mustajoki, Jyri; Marttunen, Mika; Ahtikoski, Anssi; Hallikainen, Ville; Helle, Timo; Hyppönen, Mikko; Jokinen, Mikko; Naskali, Arto; Tuulentie, Seija; Varmola, Martti; Vatanen, Eero; Ylisirniö, Anna-Liisa.
Monitavoitearviointi Ylä-Lapin metsien kestävän käytön mahdollisuuksista. Metsätieteen aikakauskirja.
2010, 1/2010, Metsäntutkimuslaitos ja Suomen Metsätieteellinen Seura. 39-63.
Refereed Journal Articles (Finland)
2006
Refereed Conference or Book Articles (Finland)
2009
Refereed Conference or Book Articles (Finland)
2007
-
Halttunen, J.
Virtauksen, lämpötilan ja paineen mittaukset. In: Joronen, T., Kovacs, J. & Majanne, Y. (toim.). Voimalaitosautomaatio. SAS julkaisusarja.
33, 2007, Helsinki. s. 84-99.
-
Juslin, K., Kettunen, A., Majanne, Y., Ollikainen, T. & Paljakka, M.
Simulointi voimalaitoksen suunnittelussa ja käytössä. In: Joronen, T. et al. (toim.). Voimalaitosautomaatio.
2007, Helsinki. Suomen automaatioseura. s. 211-228.
-
Korpela, T.
Hakepolton hallinta 2- PUUT61. Alakangas, E. (toim.). Puupolttoaineiden pientuotannon ja -käytön panostusalue, vuosikatsaus 2007. Teknologiakatsaus.
2007, TEKES. pp. 97-100.
-
Korpela, T.
Hakepolton hallinta - PUUT51. Alakangas, E. (toim.). Puupolttoaineiden pientuotannon ja -käytön panostusalue, vuosikatsaus 2007. Teknologiakatsaus.
208/2007, 2007, TEKES. pp. 92-96.
-
Koskelainen, L. & Majanne, Y.
Voimalaitoksen käyttö ja pääkomponentit. In: Joronen, T. et al. (toim.). Voimalaitosautomaatio.
2007, Helsinki. Suomen automaatioseura. s. 26-53.
-
Kovacs, J., Mononen, J. & Majanne, Y.
Voimalaitoksen pääkomponenttien mallinnus. In: Joronen, T. et al. (toim.). Voimalaitosautomaatio.
2007, Helsinki. Suomen automaatioseura. s. 54-83.
-
Kuncova-Kallio, J.
Cell measurements for living adherent cells. In: Kuncova-Kallio, J. et al. (eds.). Advanced Topics in Microsystem Technology: Microrobotics and Its Applications in Biology. Tampere University of Technology. Institute of Automation and Control. Report.
2007:1, 2007, Tampere. pp. 17-58.
-
Lukkari, M.
Electrophysiological measurement of cells - patch clamp. In: Kuncova-Kallio, J. et al. (eds.). Advanced Topics in Microsystem Technology: Microrobotics and Its Applications in Biology. Tampere University of Technology. Institute of Automation and Control. Report.
2007:1, 2007, pp. 59-86.
-
Majanne, Y.
Lieriön pinnankorkeuden mittaus. In: Joronen, T. et al. (toim.). Voimalaitosautomaatio.
2007, Helsinki. Suomen automaatioseura. s. 100-104.
-
Ronkanen, P.
Modelling and control of piezoelectric actuators. In: Kuncova-Kallio, J. et al. (eds.). Advanced Topics in Microsystem Technology: Microrobotics and Its Applications in Biology. Tampere University of Technology. Institute of Automation and Control. Report.
2007:1, 2007, Tampere. pp. 171- 194.
Refereed Conference or Book Articles (Finland)
2005
Non-Refereed Articles (Finland)
2011
-
Helin, Tomi; Huovinen, Mikko; Koivisto, Hannu.
Teollisten prosessien mallinnus korrelaatio- ja regressiomenetelmiä käyttäen. In: Visala, Arto (ed.). Automaatio XIX Seminaari, 15-16.3.2011, Helsinki. SAS julkaisusarja
41, 2011, Helsinki. Suomen Automaatioseura. 1-5.
-
Hirvonen, Juha; Kallio, Pasi.
Konenäköalgoritmien käyttö mikrosysteemitekniikan tutkimuksessa. Automaatio XIX Seminaari, 15-16.3.2011, Helsinki. SAS julkaisusarja
41, 2011, Helsinki. Suomen Automaatioseura. 1-6.
-
Kannisto, Petri; Hästbacka, David; Kuikka, Seppo.
Laitteiden ympäristövaikutusten arviointi palvelukeskeisillä liiketoimintaprosesseilla. In: Visala, Arto (ed.). Automaatio XIX Seminaari, 15-16.3.2011, Helsinki. SAS julkaisusarja
41, 2011, Helsinki. Suomen Automaatioseura.
-
Laukkanen, Ville; Huovinen, Mikko.
Teollisten tuotantolaitosten mittausten online-kunnonvalvonta taselaskentoja hyödyntäen. In: Visala, Arto (ed.). Automaatio XIX Seminaari, 15-16.3.2011, Helsinki. SAS julkaisusarja
41, 2011, Helsinki. Suomen Automaatioseura. 1-6.
-
Roinila, Tomi; Huovinen, Mikko; Vilkko, Matti.
Prosessien online-seuranta taajuusmenetelmin. In: Visala, Arto (ed.). Automaatio XIX Seminaari, 15-16.3.2011, Helsinki. SAS julkaisusarja
41, 2011, Helsinki. Suomen Automaatioseura.
-
Vepsäläinen, Timo; Hästbacka, David; Kuikka, Seppo.
Simulointiavusteinen mallipohjainen automaatiosovelluskehitys. Automaatio XIX Seminaari, 15-16.3.2011, Helsinki. SAS julkaisusarja
2011, Helsinki. Suomen Automaatioseura. 1-6.
-
Yli-Fossi, Timo; Köykkä, Petri; Majanne, Yrjö.
Benson-läpivirtauskattilan vesi-höyrypuolen yleinen dynaaminen malli. In: Visala, Arto (ed.). Automaatio XIX Seminaari, 15-16.3.2011, Helsinki. SAS julkaisusarja
41, 2011, Helsinki. Suomen Automaatioseura. 1-6.
Non-Refereed Articles (Finland)
2010
-
Hytti, Heli; Muukkonen, Tatu; Huovila, Henrik; Känsälä, Klaus; Lehtonen, Mikko.
Pietsoanturi louhii itse energiansa. Promaint.
24, 2010, 5, 50-53.
-
Majanne, Yrjö.
Ympäristötehokkuuden monitorointia Salmisaaren voimalaitoksella. Automaatioväylä.
2010, 7, 13-15.
-
Meriluoto, Jussi; Spoof, Lisa; Nybom, Sonja; Kallio, Pasi; Vehniäinen, Markus; Hautala, Henna; Lövgren, Timo.
Tekesin rahoituksella kehitetään analytiikkaa myrkyllisten sinilevien tunnistamiseen. Tekesin rahoituksella kehitetään analytiikkaa myrkyllisten.
41, 2010, 7, 72-74.
Non-Refereed Articles (Finland)
2009
-
Huovinen, M., Cederlöf, H. & Hietanen, V.
Älykkäämpää diagnostiikkaa kenttälaitteiden avulla. Automaatio XVIII, Seminaari 17.-18.3.2009, Helsinki. SAS julkaisusarja.
36, 2009, Suomen automaatioseura. 6 s.
-
Hytti, H., Muukkonen, T., Huovila, H., Känsälä, K. & Lehtonen, M.
Metalli- ja komposiittirakenteisiin integroitava kunnonvalvontajärjestelmä. Automaatio XVIII, Seminaari 17.-18.3.2009, Helsinki. SAS julkaisusarja.
36, 2009, Suomen automaatioseura r.y.. 6 s.
-
Korpela, T., Ruusunen, M., Björkqvist, T. & Lautala, P.
Control structures of a multivariable process applied to small scale biomass combustion. Automaatio XVIII, Seminaari 17.-18.3.2009, Helsinki. SAS julkaisusarja.
36, 2009, Suomen automaatioseura. 8 s.
-
Kuikka, S.
Automaatiosuunnittelusta tutkimuksen ja opetuksen silmin, mestariluokka 2. Automaatio XVIII, Seminaari 17.-18.3.2009, Helsinki. SAS julkaisusarja.
36, 2009, Suomen automaatioseura. 15 s.
-
Majanne, Y.
IFAC Symposium on Power Plants and Power Systems Control- 6-8.7.2009, Tampere. Automaatioväylä.
2009, 6/2009, s. 48.
-
Majanne, Y. & Maasalo, M.
Dynaaminen simulointi osana prosessien ja automaation suunnittelua, esimerkkinä teollisuusvoimalaitosten höyryverkot. Automaatio XVIII, Seminaari 17.-18.3.2009, Helsinki. SAS julkaisusarja.
36, 2009, Suomen automaatioseura.
-
Paljakka, M., Kalajainen, T., Aro, J., Hannelius,T., Salonen, E., Suihkonen, K., Salmenperä, M., Salonen, M.K. & Seilonen, I.
Java implementation of OPC unified architecture. Automaatio XVIII, Seminaari 17.-18.3.2009, Helsinki. SAS julkaisusarja.
36, 2009, Suomen automaatioseura. 6 s.
-
Rauhamäki, J., Hästbacka, D., Vepsäläinen, T., Kuikka, S., Tommila, T., Mätäsniemi, T., Peltola, J. & Sierla, S.
UML-mallipohjainen kehitysprosessi automaatiosovellusten tuottamisessa. Automaatio XVIII, Seminaari 17.-18.3.2009, Helsinki. SAS julkaisusarja.
36, 2009, Suomen automaatioseura. 6 s.
-
Roinila, T., Hirvonen, J., Ronkanen, P., Vilkko, M. & Kallio, P.
Nopea taajuusvastemittaus korrelaatiomenetelmin. Automaatio XVIII, Seminaari 17.-18.3.2009, Helsinki. SAS julkaisusarja.
36, 2009, Suomen automaatioseura. 6 s.
-
Salonen, M., Salmenperä, M. & Kuikka, S.
OPC UA - uusi tietoliikenneprotokolla automaatioon. Automaatio XVIII, Seminaari 17.-18.3.2009, Helsinki. SAS julkaisusarja.
2009, Suomen automaatioseura. 6 s.
-
Tervo, K., Palmroth, L. & Koivo, H.
Ihmisen toimintaan mukautuvat älykkäät , opastavat ja valmentavat mekatroniset järjestelmät. Automaatio XVIII, Seminaari 17.-18.3.2009, Helsinki. SAS julkaisusarja.
36, 2009, Suomen automaatioseura. 6 s.
-
Vepsäläinen, T., Hästbacka, D., Rauhamäki, J. & Kuikka, S.
Kohti tehokkaampaa automaatiosovellusten suunnittelua. Automaatioväylä.
2009, 3/2009, Helsinki, Finland. Suomen automaatioseura. s. 20-22.
-
Vepsäläinen, T., Hästbacka, D., Rauhamäki, J. & Kuikka, S.
Työkaluketju automaatiosovellusten UML-pohjaiseen suunnitteluun. Automaatio XVIII, Seminaari 17.-18.3.2009, Helsinki. SAS julkaisusarja.
36, 2009, Suomen automaatioseura. 6 s.
-
Virtanen, J., Varkki, A., Koivisto, H. & Jääskeläinen, E.
Desicion support system for a complex nickel leaching process. Automaatio XVIII, Seminaari 17.-18.3.2009, Helsinki. SAS julkaisusarja.
36, 2009, Suomen automaatioseura. 6 s.
Non-Refereed Articles (Finland)
2008
-
Ali-Raatikainen, J., Pötry, J., Hästbacka, D. & Seilonen, I.
Mitä uutta MES-rintamalta?. Automaatioväylä.
2008, 3, s. 14-17.
-
Kallio, P., Välimaa. & Vahimaa, P.
Uusia laboratoriotestejä nanotekniikoin - nopeutta ja herkkyyttä diagnostiikkaan. Prosessori.
2008, 11, s. 34-35.
-
Korpela, T.
Combustion control of small scale wood chip and pellet fired systems. IV Liekkipäivä, International Flame Research Foundation, Suomen Kansallinen Osasto, IV Flame Day, 23.1.2008, Tampere, Finland.
2008, 7 p.
Non-Refereed Articles (Finland)
2007
-
Jokinen, H. & Ritala, R.
Value of measurement information: general principles and cases. Automaatio 07. Seminaaripäivät 27.-28.3.2007, Helsinki. SAS julkaisusarja.
34, 2007, Helsinki. 6 p.
-
Laitinen, O., Hästbacka, D., Kuikka, S., Juden, T. & Valve, V.
Automaatiosuunnittelijan perustehtävä ja työnteon tukeminen: esimerkkinä Autaki-sovellus. Automaatio 07 seminaaripäivät , 27.-28.3.2007, Helsinki, Finland.
2007, 6 s.
-
Laitinen, O., Hästbacka, D., Kuikka, S., Tommila, T. & Salo, L.
Työntutkimuksella tehokkuutta automaatiosuunnitteluun. Automaatioväylä.
2007, 6, s. 24-26.
-
Lehtonen, S. Hietanen, V. , Happonen, H. , Huovinen, M. & Ahvenlampi, J.
Kokonaisvaltainen järjestelmä teollisten prosessien diagnostiikkaan ja suorituskyvyn seurantaan. Automaatio 07 seminaaripäivät , 27.-28.3.2007, Helsinki, Finland.
2007, 6 s.
-
Loisa, M.
Soft sensor based quality control solution for mechanical pulp refiners. AutomaatioVäylä.
2007, 3, s. 8-10.
-
Majanne, Y.
Höyryvoimalaitoksen diagnostiikka ja vikasietoinen säätö. Automaatio 07 seminaaripäivät , 27.-28.3.2007, Helsinki, Finland.
2007, 6 s.
-
Mäkelä, M., Ylisaari, J., Manninen, V., Ptak, P. & Tolonen, M.
Assessment of paper machine automation supported by the simulation. Automaatio 07. Seminaaripäivät 27.-28.3.2007, Helsinki. SAS julkaisusarja.
34, 2007, Helsinki. 6 p.
-
Pulkkinen, P., Laurikkala, M., Ropponen, A. & Koivisto, H.
Fuzzy case-based reasoning system improves GPRS quality management. Automaatioväylä.
2007, 5, s. 12-15.
-
Pulkkinen, P., Laurikkala, M., Ropponen, A. & Koivisto, H.
Improving man-machine interface to GPRS quality management with fuzzy case-based reasoning. Automaatio 07 seminaaripäivät , 27.-28.3.2007, Helsinki, Finland.
2007, 6 p.
-
Silvola, R., Hannila, J., Seppälä, J. & Koivisto, H.
Experimental performance evaluation of Profinet IO Real-Time version. Automaatio 07 seminaaripäivät , 27.-28.3.2007, Helsinki, Finland.
2007, 6 p.
-
Strömman, M. Peltola, J., Koskinen, K., Hirvonen, J., Hukki, K., Tommila, T., Laitinen, O. & Kuikka, S.
2017 - onko Suomessa automaatiosuunnittelua ?. Automaatio 07 seminaaripäivät , 27.-28.3.2007, Helsinki, Finland.
2007, 6 s.
-
Viinikkala, M & Kuikka, S.
Merkitystä käynnissäpitoon semanttisen tehdasmallin ja palvelujen avulla. Automaatio 07 seminaaripäivät , 27.-28.3.2007, Helsinki, Finland.
2007, 6 s.
Non-Refereed Articles (Finland)
2006
-
Kallio, P.
Mikrosysteemitekniikkaa makrosovelluksiin?. Automaatioväylä.
2006, 1, s. 7-9.
-
Lekkala, J., Riistama, J., Vanhala, J., Heino, P., Arra, S., Heinisuo, S., Kokko, K., Mäntylä, M., Kellomäki, M., Harjunpää, H., Hyttinen, J. & Väisänen, J.
Sydänagentti tarkkailee. Prosessori. Elektroniikan suunnittelu.
2006, 11, s. 48-49.
-
Österberg, P.
Digitaalikuvien mahdollisuudet puun laadun mittauksessa. Puumies.
51, 2006, 1, s. 16-17.
Non-Refereed Articles (Finland)
2005
-
Kärki, S.
Palomiehen älypuku. Tekstiililehti.
68, 2005, 2, s. 12-13.
-
Laitinen, O., Strömman, M., Piik, H. & Åberg, J.
Panosautomaatio suomalaisessa teollisuudessa. Automaatioväylä.
2005, 5, S. pp. 20-21.
-
Rajala, M.
Verkottuneiden järjestelmien diagnostiikkaan käytettävien tilastollisten mallien identifiointi. In: Ylén, J.-P. (ed.). Automaatio 05, Seminaaripäivät, 6.-8.9.2005, Helsinki. SAS julkaisusarja.
28, 2005, s. 457-462.
-
Ruohonen, T., Seppälä, J., Salmenperä, M. & Koivisto, H.
Secure autoconfiguration of field equipment in mobile automation system. Automaatio 05, Automaatio 2005, Seminaaripäivät, 6.-8.9.2005, Helsinki, Finland.
2005, helsinki, Finland. Suomen Automaatioseura ry. pp. 253-258.
-
Syrjälä, S. & Kuikka, S.
Ohjelmistoagentit teollisuuden poikkeustilanteiden hallinnassa. Automaatio05 seminaaripäivät , 6.-8.9.2005, Helsinki.
2005, Helsinki. s. 239-244.
-
Viinikkala, M. & Kuikka, S.
Web-sovelluspalveluihin perustuvat käynnissäpidon lisäarvopalvelut. Automaatio05 seminaaripäivät , 6.-8.9.2005, Helsinki.
2005, pp. 263-268.
Non-Refereed Articles (Finland)
2004
-
Lekkala, J., Riistama, J., Ristolainen, E., Vanhala, J., Heinisuo, S., Kokko, K., Kellomäki, M., Haltia, A.-M., Harjunpää, H., Hyttinen, J. & Väisänen, J.
Viestejä elimistöstä. Prosessori, Elektroniikan suunnittelu erikoisnumero.
26, 2004, 11, s. 38-40.
Non-Refereed Articles (Finland)
2003
-
Asikainen, S. & Loisa, M.
Kuvasta saatava informaatio ja sen yhdistäminen prosessidataan. In: Tuokko, R. (ed). Automaatio03. Seminaaripäivät. Automation Makes it Work - Automaation sovellukset ja käyttökokemukset. Suomen Automaatioseura ry. Syyskuu 9-11, 2003, Helsinki..
2003, 27, Helsinki. s. 79-84.
-
Hätönen, K., Kumpulainen, P. & Vehviläinen, P.
Pre- and Post-processing for Mobile Network Performance Data. In: Tuokko, R. (ed). Automaatio03. Seminaaripäivät. Automation Makes it Work - Automaation sovellukset ja käyttökokemukset. Suomen Automaatioseura ry. Syyskuu 9-11, 2003, Helsinki..
2003, 27, Helsinki. s. 311-316.
-
Kuikka, S. & Laitinen, O.
Panosautomaation oppimisympäristö. In: Tuokko, R. (Ed.). Automaatio 03 seminaaripäivät, Automation Makes it Work - Automaation sovellukset ja käyttökokemukset, 9. - 11.9.2003, Helsingin Messukeskus, Helsinki.
2003, Suomen Automaatioseura. s. 263-268.
-
Lucan, V., Simacek, P., Seppälä, J. & Koivisto , H.
Bluetooth and wireless LAN applicability for real time control. In: Tuokko, R. (Ed.). Automation Makes it Work - Automaation sovellukset ja käyttökokemukset, 9. - 11.9.2003, Helsingin Messukeskus, Helsinki.
2003, Suomen Automaatioseura. s. 35-40.
-
Ritala, R.
Analysis of extensive industrial datasets: achievements and challenges. In: Tuokko, R. (ed). Automaatio03. Seminaaripäivät. Automation Makes it Work - Automaation sovellukset ja käyttökokemukset. Suomen Automaatioseura ry. Syyskuu 9-11, 2003, Helsinki..
2003, 27, Helsinki. s. 239-244.
-
Ritala, R., Ihalainen, H., Latva-Käyrä, K. & Vesterinen, T.
Yksinkertainen bioreaktorimalli epästationäärisen data-analyysin esimerkkikohteena. AutomaatioVäylä, Ympäristötekniikka.
2003, 5, Automaatioväylä Oy. s. 5.
-
Salmenperä, M., Seppälä, J. & Koivisto, H.
Applying .NET framework to condition monitoring in globally distributed environment. AIn: Tuokko, R. (Ed.). Automaatio 03 seminaaripäivät, Automation Makes it Work - Automaation sovellukset ja käyttökokemukset, 9. - 11.9.2003, Helsingin Messukeskus, Helsinki.
2003, Suomen Automaatioseura. s. 293-298.
-
Viinikkala, M., Lakka, S. & Kuikka, S.
Integrating automation design information with XML and Web services. In: Tuokko, R. (Ed.). Automaatio 03 seminaaripäivät, Automation Makes it Work - Automaation sovellukset ja käyttökokemukset, 9. - 11.9.2003, Helsingin Messukeskus, Helsinki.
2003, Suomen Automaatioseura. s. 335-340.
Books and Reports (Finland)
2009
Books and Reports (Finland)
2007
-
Joronen, T., Kovacs, J. & Majanne, Y. (toim.).
Voimalaitosautomaatio.
2007, Helsinki. Suomen automaatioseura r.y.. 275 s.
-
Kuncova-Kallio, J. & Kallio, P. (eds.).
Advanced topics in microsystem technology: microrobotics and its applications in biology. Tampere University of Technology, Institute of Automation and Control, Report.
2007:1, 2007, Tampere. 195 p.
Books and Reports (Finland)
2006
Books and Reports (Finland)
2005
Books and Reports (Finland)
2004
-
Halttunen, J. (toim.).
Coriolis-mittarin vertailumittaus, syksy 2002. MIKES, Metrologia, Mittatekniikan keskus, Julkaisu.
J4/2004, 2004, Helsinki. 37 s.
-
Kallio, P. & Kuncova, J.
Microfluidics. TEKES Technology review.
2004, 158/2004, Helsinki. TEKES, National Technology Agency, Finland. 33 s.
Books and Reports (Finland)
2003
Dissertations
2010
-
Riistama, Jarno.
Characterisation of wearable and implantable physiological measurement devices /,
2010.
-
Hytti, Heli.
Energy efficient measurement and signal processing for self-powered, lamb-wave-based structural health monitoring system /,
2010.
-
Roinila, Tomi.
Fast frequency response measurement techniques in analyzing the dynamics of switched-mode power supplies /,
2010.
-
Huovinen, Mikko.
Large-scale monitoring applications in process industry /,
2010.
-
Mettänen, Marja.
Measurement of print quality : joint statistical analysis of paper topography and print defects,
2010.
-
Graeffe, Jussi.
Optical online measurement of paper thickness /,
2010.
Master’s theses
2011
-
Haapa-aho, Jonne.
Combustion Improvement of Small-Scale Pellet Boiler by Continuous Control,
2011.
-
Martikainen, Eero.
Energiataseen selvitys monilaitosympäristössä,
2011.
-
Kuikka, Toni.
Ennustavan säädön toteuttaminen : suunnittelumallilähestymistapa,
2011.
-
Taipale, Teijo.
Fieldbus network analysis with time domain reflectometry,
2011.
-
Pyrhönen, Veli-Pekka.
H∞ optimization based Loop Transfer Recovery design for HDD servo system,
2011.
-
Ketonen, Samu.
Kiinteän biopolttoaineen käsittelyjärjestelmän anturointi,
2011.
-
Suni, Sampsa.
Lasivillan imukaapin poistoilman säädön automatisointi,
2011.
-
Gört, Henri.
Logiikkaohjatun nosturin varusohjelmiston sovelluspalveluarkkitehtuuri,
2011.
-
Suomela, Juha-Pekka.
Ohjausjärjestelmän Systems Modeling Language- pohjainen ohjelmistokehitys,
2011.
-
Suominen, Olli.
Optimal measurement scheduling in LQG systems,
2011.
-
Korkka, Henri.
Pienellä kosketusnäyttöpaneelilla toteutettu teollisuuden valvonta- ja hallintakäyttöliittymä,
2011.
-
Välimaa, Hermanni.
Pressure difference and temperature measurements in grate combustion analysis,
2011.
-
Kannisto, Petri.
Service-oriented business process modeling in operations and maintenance,
2011.
-
Kasari, Mikko.
Tuotantolaitoksen lavausjärjestelmän kehittäminen,
2011.
-
Vanhakylä, Juhani.
Varastovalvonnan tehostaminen tuotannon jatkuvuuden takaamiseksi kokoonpanolinjalla,
2011.
Master’s theses
2010
-
Loukiainen, Tero.
Ampumatarvikkeiden staattisen sähköpurkauksen sietoisuuden testaus,
2010.
-
Saari, Valtteri.
Analysis of strain in high strain rate compression of wood using an image based analysis method,
2010.
-
Korhonen, Harri.
Apulaitevaihteiston kunnonvalvontaan tähtäävät tärinämittaukset,
2010.
-
Vihottula, Markus.
Ase- ja puolustusteollisuuden maine ja eettinen työnantajaimago,
2010.
-
Sjögren, Harry.
Automaatiojärjestelmän ylijännitesuojausratkaisut,
2010.
-
Lauhasmaa, Anna.
Automaation palveluprojektien tuotteistus,
2010.
-
Tanner, Heikki.
Automaatiosovelluspaketin tuotteistaminen,
2010.
-
Happonen, Mika.
Automaatiosuunnittelun läpimenoajan lyhentäminen tilaus-toimitusprosessissa,
2010.
-
Luotonen, Ville.
Avoimen kotiautomaatiojärjestelmän lanseeraus,
2010.
-
Sainio, Aki Taneli.
Calibration and control design for a 3-DOF teleoperated water hydraulic arm,
2010.
-
Pokkinen, Timo.
Cobol-ohjelmistojen siirrettävyydestä,
2010.
-
Viderholm, Janne.
Consistency disturbances due to disc filter and their control,
2010.
-
Essen von, Mathias.
Control software for microrobotic platform,
2010.
-
Änäkäinen, Veijo.
Crane Motion Control,
2010.
-
Lehtonen, Aleksi.
Data distribution protocol for container handling equipment interface,
2010.
-
Varis, Antti.
Development of an agile software development and subcontracting process for a project organization,
2010.
-
Haikonen, Henri.
Development of automated tester for RFID test bench,
2010.
-
Henttonen, Jussi.
Development of piezo injector technology for industrial mixing processes,
2010.
-
Nikkola, Matti.
Emission monitoring authority requirements at power plants in EU,
2010.
-
Hirvonen, Juha.
Estimation of injection volume in capillary microinjection using electrical impedance measurement,
2010.
-
Taura, Pasi.
Evolution of centralised test automation system,
2010.
-
Vidberg, Iiro.
A framework for database centric machine control systems engineering,
2010.
-
Kylliäinen, Petteri.
A graphical user interface framework for container handling,
2010.
-
Mäkelä, Tero.
Grid communication protocols, IEC 61850 and related protocols,
2010.
-
Heljo, Petri.
High frequency characterization of printed organic diodes,
2010.
-
Paattilammi, Jukka.
Hissien ja rullaportaiden energiankulutuksen mittaaminen ja energiatehokkuuden määrittely,
2010.
-
Lunti, Mika.
Höyryn kulutusvaihteluiden hallinta paperitehtaan höyryverkossa,
2010.
-
Lautala, Jussi.
ISA-95 standardin ja siihen liittyvien suunnittelumallien hyödyt valmistuksenohjausjärjestelmätoimittajalle,
2010.
-
Sirkkola, Aki.
Junien kenttäväylät ja niiden integrointi oviohjainsovelluksissa,
2010.
-
Lempiäinen, Janne.
Kalsiittirikasteen vaaleuden säätö rikastusprosessissa,
2010.
-
Hirvelä, Kimmo.
Kartonkikoneen profiilisäätöjen kehittäminen,
2010.
-
Seppälä, Jarmo.
Kattilalaitoksen piirikohtaisten toimintakuvausten generointi,
2010.
-
Tarvainen, Pekka.
Kattilalaitoksen turva-automaation asianmukaisuus,
2010.
-
Ranta, Riku.
Kemiallisten antureiden testausympäristö,
2010.
-
Marishin, Vadim.
Kenttäväylät laivojen ilmastoinnin automaatiojärjestelmissä,
2010.
-
Honkala, Jarno.
Konenäön soveltuvuus lehmien paikannukseen sisätiloissa,
2010.
-
Katajisto, Juha Mikael.
Kotiautomaatiokonseptin kehitys ja simulointi,
2010.
-
Franssila, Heljä.
Käytönaikainen prosessin operointikäytäntöjen kehittäminen : tapaustutkimus kemiantehtaassa,
2010.
-
Sundqvist, Kalevi.
Langaton kenttälaiteverkko tutkimus- ja opetuskäyttöön,
2010.
-
Piekkari, Pauli.
Langattomien sensoriverkkojen soveltaminen teollisuusympäristöön,
2010.
-
Honkala, Janne.
Liikkuva paikkatietosovellus : ajoittain yhteydetön ratkaisu,
2010.
-
Vuorela, Mika.
Linux-ytimen automaattinen testaaminen sulautetussa ympäristössä,
2010.
-
Piipponen, Erkki.
Luotettavan laskentapalvelun toteuttaminen sotilassovelluksessa,
2010.
-
Mäntymaa, Anne.
Microfluidics in dry-chemistry based immunoassays : Anne Mäntymaa,
2010.
-
Saaketi, Pooya.
Microrobotics platform for manipulation and flexibility measurement of individual paper fibers,
2010.
-
Laakso, Aki.
Moottori- ja pumppuyhdistelmän kunnonvalvonta kenttäväylän ja langattoman tiedonsiirron avulla,
2010.
-
Ojala, Janne.
One-dimensional modelling of steam pipe flow,
2010.
-
Vehkakoski, Minna.
OPC-standardin soveltaminen prosessi-informaation integroinnissa,
2010.
-
Viitanen, Mikko.
Oppimis- ja opetustyylien vaikutus oppimisen ja osaamisen arviointiin Tampereen ammattiopiston sähkö- ja automaatiotekniikan perustutkinnossa,
2010.
-
Mäki, Antti-Juhana.
Optically induced electric fields and their use in microfluidics and cell manipulation applications,
2010.
-
Lehtonen, Risto.
Osakekurssikehityksen ennustaminen MLP-neuroverkoilla ja geneettisillä algoritmeilla,
2010.
-
Rintanen, Jussi.
Palveluprosessin käynnistäminen ja kehittäminen alihankkijaorganisaatiossa,
2010.
-
Haapanen, Lauri.
Prosessi-informaation hallinnan vaatimukset ja teknologiat,
2010.
-
Viiala, Riikka.
Pulping process management based on broke consistency variation analysis,
2010.
-
Meronen, Mika.
Rakennusautomaatiojärjestelmien nykytilanne ja langattomuuden kehitysnäkymät kenttälaitetasolla,
2010.
-
Ruohomäki, Vesa.
Rautatieautomaatiojärjestelmän toteutusta tukevan suunnittelujärjestelmän kehittäminen,
2010.
-
Tunis, Staffan.
Real-time industrial Ethernet in machine automation systems,
2010.
-
Lauri, Mikko.
RFID-mikrosirun impedanssin määrittäminen langattomasti : menetelmä ja epävarmuusanalyysi,
2010.
-
Saarelainen, Raimo.
Robotisoidun särmäyssolun toiminnan kehittäminen konepajatuotteita valmistavassa yrityksessä,
2010.
-
Heinonen, Riku.
SaaS-malli tietojärjestelmien hankintatapana,
2010.
-
Vanhanen, Satu.
Sample pre-processing in a microfluidic cartridge,
2010.
-
Piiroinen, Timo.
Simulointimallipohjainen ohjelmistokehitys sulautettuun järjestelmään,
2010.
-
Taskinen, Aki.
Size and shape distribution estimation of crushed aggregate using 3D profile measurement,
2010.
-
Haliseva, Matti.
Sovelluksia sahateollisuuteen erään valmistajan laser- ja ultraääniantureilla,
2010.
-
Laaksonen, Sami.
Sulpun sakeuden mittausmenetelmän suorituskyvyn arviointi,
2010.
-
Lahtinen, Juri.
Supervisory control performance assesment and prerequisites for good control,
2010.
-
Vähäsöyrinki, Jani.
Teollisuuskeittiöympäristön lämpötilaomavalvontajärjestelmän laajentaminen palvelupohjaiseksi,
2010.
-
Valve, Ville.
Tietomallin käyttö rakennushankkeen tuotannonsuunnitteluun,
2010.
-
Kuisma, Ari.
Toiminnallisen turvallisuuden standardien mukainen suunnittelu,
2010.
-
Heurlin, Tero.
Tuotantosolun automatisointi sähkö- ja automaatiokeskusten valmistuksessa,
2010.
-
Kolu, Antti.
Työkoneiden ohjausjärjestelmien automaattisen testauksen konseptin ja hallinnoinnin kehitys,
2010.
-
Pirhonen, Risto.
Virtakiskojen mitoituksen ja dokumentoinnin kehittäminen,
2010.
-
Pyykönen, Markus.
Voimalaitoksen pitkäntähtäimen investointisuunnittelun ja kuntoraportoinnin kehitys,
2010.
-
Heinonen, Juho-Mikko.
Vuoropohjaisen pelin synkronointi epävarmassa verkkoympäristössä,
2010.
-
Kamunen, Hannu.
Ydinvoimalaitoksien automaatiojärjestelmien rakentamisen ja uudistamisen laadunhallinta,
2010.
Master’s theses
2009
-
Yu, Hong.
An algorithm to detect zero-velocity in automobiles using accelerometer signals,
2009.
-
Hänninen, Tero.
Alusten polttoaineen kulutusmittauksen modernisointi,
2009.
-
Alho, Pekka.
Application of new automation software design and integration technologies in teaching,
2009.
-
Post, Olli.
Automaation laitetason sertifikaattipohjainen tietoturva,
2009.
-
Itävuo, Pekka.
Dynamic modeling of a rock crushing process,
2009.
-
Miettinen, Heimo.
Edullisen kulmanmittausmenetelmän kehittäminen särmäyspuristimeen,
2009.
-
Silvennoinen, Antti Juhana.
The effects of plate ageing on thermomechanical pulp refining,
2009.
-
Mikkonen, Jari.
Effects of process and control design on attenuation consistency variations at a production line,
2009.
-
Laine, Jukka.
High speed digital imaging of solid fuel fragmentation under fluidized bed combustion conditions,
2009.
-
Toivonen, Juha.
Hiilidioksidipäästöjen raportoinnin kehittäminen,
2009.
-
Koskela, Seppo.
Hälytysten laadun parantaminen kehittämällä suunnitteluprosessia,
2009.
-
Bhatti, Asif Zubair.
Implementation of real time automation switch using Linux operating system,
2009.
-
Hannelius, Tom.
Integrating industrial information systems with OPC UA - A Java reference implementation,
2009.
-
Silver, Timo.
IT-palveluiden hallinta ITIL-mallin avulla kohdeyrityksessä,
2009.
-
Tikkala, Jari.
Järjestelmäohjausten suunnittelutoiminnan kehittäminen tuotantoautomaatioalan yrityksessä,
2009.
-
Heikura, Jarkko.
Kattilalaitoksen prosessi-ilmastoinnin tuotteistaminen tiedonhallintajärjestelmään,
2009.
-
Hirsikangas, Tuomo.
Kaupallisen ja avoimeen lähdekoodiin perustuvan yksikkötestaustyökalun vertailu,
2009.
-
Markkula, Lauri.
Ketterien ohjelmistokehitysmenetelmien soveltaminen ja etujen arvioiminen eräässä projektissa,
2009.
-
Saarinen, Turkka.
Key performance indicators in embedded system software development,
2009.
-
Remes, Mikko.
Konenäköpohjainen joustava kappaleensyöttö robottihitsauksessa,
2009.
-
Aho, Mikko.
Konfiguraationhallinta automaatiojärjestelmäprojekteissa,
2009.
-
Vähä-Jaakkola, Tuomas.
Laadunhallinnan kehittäminen tela-alustaisten kivenmurskainten valmistuksessa,
2009.
-
Talasniemi, Jari.
Liikkuvien työkoneiden ohjelmistokehityksen työmäärä- ja kustannusarviointi,
2009.
-
Nurminen, Kirsi.
Miniatyrisoitu pH-anturimatriisi soluviljelymittaukseen,
2009.
-
Virtanen, Isto.
Mukautettu CANopen vaatimuksenmukaisuustestaus,
2009.
-
Oksanen, Helena.
Murskeen kokojakauman mittaus liikkuvassa työkoneessa,
2009.
-
Maijala, Anna.
Ohjelmoitavan automaation ylläpidonaikaisen versionhallinnan kehittäminen Olkiluodon ydinvoimalaitoksilla,
2009.
-
Salonen, Mikko.
OPC UA tietoturvatoteutus Java-ohjelmointikielellä,
2009.
-
Ahola, Panu.
Production testing of distributed control systems in mobile mining machines,
2009.
-
Järvinen, Veli-Matti.
Progressiivisen latauspuristimen automatisointi synkroniservomoottorilla,
2009.
-
Laine, Jani.
Pyrolyysiöljyprosessiin kytketyn kiertoleijukattilan säätö,
2009.
-
Rajalin, Hannu.
Radio frequency measurements for radio broadcast receivers and transmitters in mobile phone applications,
2009.
-
Kiviniemi, Olavi.
Rautatiekaluston kunnossapidon kehittäminen,
2009.
-
Varkki, Anssi.
Soft sensorin kehittäminen nikkelin liuotusprosessin kiintoaineen analyyseille,
2009.
-
Leskinen, Mikko.
Sulfaattiselluloosatehtaan talteenottolinjan hallinta,
2009.
-
Hanhela, Arttu.
Sähkönjakelun, sähköistyksen ja automaation kustannusarvio eräässä teollisuusympäristössä,
2009.
-
Nurmi, Rami.
Tampereen kaupungin Tietotekniikkakeskus liikelaitoksen tietoliikenneverkon sisäinen auditointi,
2009.
-
Hahto, Antti.
A task planning tool for fusion reactor remote handling,
2009.
-
Oinaanoja, Jari.
Tehdastietomallit investointiprojektin tietojen siirrossa,
2009.
-
Aryal, Arjun.
Towards implantable and matrix type pH microsensor for physiological pH measurement,
2009.
-
Lindström, Kimmo.
Ultraäänen sovellutukset painesihtien puhtaanapitoon,
2009.
-
Rauhamäki, Jari.
UML-mallipohjaisen sovelluskehityksen ohjeistus automaatio-ohjelmistoille,
2009.
-
Kortetmaa, Antti.
Utilizing open system trace for timing analysis in symbian environment,
2009.
-
Naghian, Mohsen.
Utilizing SNMP in wireless control networks based on radio modems,
2009.
-
Ehto, Jukka.
Verkonvalvontaohjelmiston määritykset,
2009.
-
Istolahti, Heikki.
Vesiturbiinin säätö kestomagneettigeneraattorikäytössä,
2009.
-
Tuominen, Lauri.
Ydinvoimalaitoksen koulutussimulaattorin käytettävyyden varmentaminen,
2009.
-
Hakala, Kari.
Ydinvoimalaitoksen simulointimallin kehittäminen,
2009.
Master’s theses
2008
-
Tuomivaara, Saku.
Anturit ja suureet koelentomittauksissa,
2008.
-
Mäki, Jouni.
Automaatioverkon tekninen tietoturva,
2008.
-
Pulakka, Juho.
Development of safety critical software for international thermonuclear experimental reactor-project,
2008.
-
Laakso, Mikko.
Distributed system design flow : fieldbus modeling,
2008.
-
Smolander, Harri.
Etäluentateknologian sovittaminen jakeluverkkoyhtiön toimintaympäristöön,
2008.
-
Tiittanen, Tommi.
Etätukiohjelmiston kehittäminen tuotantoautomaatiojärjestelmälle,
2008.
-
Kovanen, Marika.
Jaetun seulatason suorituskyvyn mallintaminen,
2008.
-
Vatanen, Sami.
Kattilalaitoksen automaation ja sähköistyksen tiedonhallinnan kehittäminen,
2008.
-
Repo, Arto.
Kattilalaitoksen instrumentoinnin kenttälaitteiden tiedonhallinnan kehittäminen verkostoituneessa projektoinnissa,
2008.
-
Virtanen, Jani.
Kattilalaitoksen instrumentointi- ja sähköistysdetaljisuunnittelutyökalujen kehittäminen,
2008.
-
Nikkanen, Lasse.
Kattilalaitoksen säätö- ja lukitussuunnittelun tehostaminen tuotteistamalla,
2008.
-
Malmivaara, Petri.
Kattilalaitoksen turva-automaatiojärjestelmän projektointimalli,
2008.
-
Berg, Tommi.
Kelauskoneen modernisointi,
2008.
-
Lahtinen, Esa.
Kenttäväylän integrointi automaatiojärjestelmään,
2008.
-
Kärkkäinen, Heikki.
Kiehutusvesireaktorin tehojakauman estimointi yhdistämällä mittauksia ja mallipohjaisia tuloksia,
2008.
-
Kaivosoja, Jyri.
Kiertoleijukattilaan yhdistetyn pyrolyysiöljyprosessin mallinnus ja säätö,
2008.
-
Yli-Länttä, Aki.
Koboltin hienopulverituotannon käyntiasteen optimointi,
2008.
-
Paukkio, Antti.
KPA-laitoksen kaukolämpöakun automatisointi ja käytön optimointi,
2008.
-
Helkala, Kimmo.
Kuonarikastamon jauhatuksen optimointi,
2008.
-
Leppämäki, Juho.
Kuvia käsittelevän Matlab-koodin käyttö C++-tuotantokoodissa,
2008.
-
Hopponen, Timo.
Laajakaistaliittymien IP-pohjainen provisiointi ja laadunhallinta,
2008.
-
Koskela, Juha.
Lentävät aukirullainsaumaukset suurissa nopeuksissa,
2008.
-
Heiskanen, Valtteri.
Machine vision based measurement methods for flow characterization in microfluidic channels,
2008.
-
Sinkko, Teemu.
Nikkelikiven liuotusprosessin dynaaminen mallintaminen,
2008.
-
Virtanen, Jukka.
Nikkelinliuotusprosessin operaattorin päätöksenteon tukijärjestelmä,
2008.
-
Lehtonen, Tomi.
Painokoneen ajettavuuden analyysi,
2008.
-
Jouppi, Kimmo.
Paperikoneen vesi- ja massataseen mallinnus ja simulointi Excelillä,
2008.
-
Aittokallio, Eemeli.
Passiivinen resonanssianturi biopotentiaalien mittaukseen,
2008.
-
Murtola, Mikko.
Pk-yrityksen automaatiostrategian laadinta tiekartta-menetelmällä,
2008.
-
Hannila, Johannes.
Reaaliaikaisten säätösovellusten testialusta Profinet IRT -verkossa,
2008.
-
Jyrälä, Petri.
Reaktorin tehonsäätöjärjestelmän luotettavuuden ja kriittisyyden arviointia tukeva simulointitarkastelu,
2008.
-
Koponen, Antti.
Sektoriloiston värirajojen automaattinen tunnistus,
2008.
-
Vänttinen, Jaana.
Soodakattilan vertikaali-ilmajärjestelmä ja tulipesäprosessin mittaukset,
2008.
-
Hippeläinen, Miia.
Stabiilisuustestauksen kehittäminen älyverkkoympäristössä,
2008.
-
Viitanen, Joni.
Suunnittelupalvelukonseptien kehitys markkinatutkimuksen perusteella,
2008.
-
Laine, Ville.
Suurten kappaleiden mittausmenetelmän integrointi hitsausrobotin ohjaukseen,
2008.
-
Vigren, Petteri.
Sähkömarkkinatietojen havainnollistaminen pääkomponenttianalyysillä,
2008.
-
Idänheimo, Sami.
Turvallisuuteen liittyvät automaatiojärjestelmät puolustusvoimien räjähdealalla,
2008.
-
Vepsäläinen, Timo.
UML-profiilityökalu automaatiosuunnitteluun,
2008.
-
Nissinen, Jani.
Verkostoituneen sähköistys- ja instrumentointiprojektin detaljisuunnittelun tiedonhallinnan automatisointi,
2008.
-
Kuusisto, Olli.
Viestintäominaisuuksien kehittäminen johtamisjärjestelmässä,
2008.
-
Savolainen, Seppo.
Weblab-tuoteperheen kolmannen osapuolen tekniikat,
2008.
-
Lehtonen, Kalle.
Älykkäät kenttälaitteet osana prosessin monitorointia,
2008.
Master’s theses
2007
-
Judén, Topi.
Automaation suunnitteluprosessin tukeminen integroidulla taitotukisovelluksella,
2007.
-
Tamminen, Mikko.
Automation of power measurement system for mobile device,
2007.
-
Ruokojärvi, Jarkko.
Enhanced user interface for teleoperation of an underground mine loader,
2007.
-
Rikalainen, Veikko.
Etädiagnostiikkalaitteiden ohjelmien versionhallinta ja konfigurointi kivenmurskausjärjestelmissä,
2007.
-
Jokinen, Kimmo.
Feasibility study on automating display module timing tests for product development,
2007.
-
Ala-Pöntiö, Anne.
Generic biosensor system based on bioluminescent sensor bacteria,
2007.
-
Pietilä, Jari.
Infrapuna-anturimatriisi turvallisuusvalvontaan kotiympäristössä,
2007.
-
Pulla, Johannes.
Jury assesment as reference for instrumental measurements of image quality,
2007.
-
Kataja, Tuomas.
Kerrosleijukattilan dynaaminen mallintaminen,
2007.
-
Köykkä, Petri.
Kiertoleijukattilan dynaaminen mallintaminen,
2007.
-
Mäntylä, Markus.
Komponenttipohjainen sovelluslaajentaminen automaation ohjelmistokehityksessä,
2007.
-
Hämäläinen, Mika.
Lentokoneen johtoreunalaipan toimilaitteen mallinnus ja simulointi,
2007.
-
Niittylahti, Jari.
Logistiikkapohjaisen rakennusautomaatiojärjestelmän kehittäminen toimistoympäristöön,
2007.
-
Mattila, Maarit.
Lämpötilan mittaus puettavassa sovelluksessa,
2007.
-
Laine, Juha.
Mass maintenance improvement for ERP ordering process,
2007.
-
Ylisaari, Johanna.
Mittaustavan vaikutus paperirainan laatusuureen estimointiin,
2007.
-
Anttonen, Kalle.
Model predictive master control of once-through CFB boiler unit,
2007.
-
Oittinen, Eetu.
MPC-viritystyökalun jatkokehitys,
2007.
-
Keronen, Pertti.
Nykyaikaiset ajoneuvoväylät,
2007.
-
Jääskeläinen, Tuomas.
Paperin poikkisuuntaisten paksuus- ja kiiltoprofiilien hallinta induktioprofiloijan avulla superkalanterointiprosessissa,
2007.
-
Lassila, Juha.
Paperiradan nopean mittausdatan analyysi,
2007.
-
Rannisto, Ari.
Poissaolojärjestelmän automatisointi,
2007.
-
Tikkanen, Pasi.
Rakennusautomaatiojärjestelmien elinkaarikustannusten vertailu,
2007.
-
Saviaro, Katja.
Review of sensor bus technology,
2007.
-
Mielikäinen, Outi.
Routing of the automatic stacking crane,
2007.
-
Mikkonen, Mika.
Semanttisen verkon kuvaustekniikat prosessilaitoksen poikkeustilanteiden hallinnassa,
2007.
-
Nieminen, Teemu.
Standardin IEC 61499 käytettävyys erään kalanterimallin koneohjausten suunnittelussa,
2007.
-
Takalo, Tuomas.
Tehokkuuden parantaminen kattila- ja automaatiotoimittajasynergiassa,
2007.
-
Laukkonen, Antti.
Tehokkuudensuunnittelutyökalun tuoterunkoarkkitehtuuri,
2007.
-
Björn, Seppo.
Terminal point of view for voice over IP in 3GPP IP multimedia subsystem,
2007.
-
Jokiniemi, Juha.
Thyristor valve of thyristor-switched high-voltage capacitor bank,
2007.
-
Hakkarainen, Kari.
Tietovuosimulaattorin HLA-liityntä,
2007.
-
Ropponen, Aino.
Todennäköisyysanalyysin sovelluksia epälineaaristen mallien dynaamiseen validointiin,
2007.
-
Vuorenpää, Petri.
Työkoneen geneerinen teleoperointikonsepti,
2007.
-
Laurila, Seppo.
Työssäoppimisen prosessimalli ja käytäntö Tampereen ammattiopistossa,
2007.
-
Maijala, Mika.
Ydinvoimalaitoksen prosessitietokonejärjestelmän uusiminen,
2007.
-
Hästbacka, David.
Yhteistoiminnallisen taitotukisovelluksen dynaaminen web-käyttöliittymä,
2007.
Master’s theses
2006
-
Järvinen, Jukka.
AOL:n vesiprosessin harjoitustöiden kehitys,
2006.
-
Anttila, Reijo.
The application of a PLC-based safety-related system,
2006.
-
Havupalo, Markus.
Automaatiojärjestelmän etäylläpito,
2006.
-
Kallioinen, Ari.
Hydrauliikan sähkötekniikan opetuksen kehittäminen,
2006.
-
Grén, Juuso.
Laatumittausten laajuuden ja tiheyden systematisointi laadunhallinnassa,
2006.
-
Koivisto, Jouni.
Laskentatyökalu tutkien ja langattomien tiedonsiirtojärjestelmien suorityskyvyn arvioimiseksi,
2006.
-
Juusela, Elina.
MPC-säädön soveltaminen sellun valkaisun peroksidivaiheeseen,
2006.
-
Hintsa, Panu.
Musteen- ja tuhkanpoiston hallinta kierrätyskuitulinjalla,
2006.
-
Koivisto, Antti.
Novel Neighborhood Server concept for Tampere Vuores suburb,
2006.
-
Jokela, Ville.
Paperikoneen massa-annostelukonseptin kehittäminen,
2006.
-
Hayashi, Juha.
Product testing system,
2006.
-
Henttinen, Harri H.
Protection against the internal threats in next generation mobile packet core networks,
2006.
-
Kataja, Keijo.
Putkiturpiinin johtopyörän mitoituksen ja säätölaitteiden kustannusten tarkastelu,
2006.
-
Henttonen, Jussi.
Sellunkuivaimen päänvientitilanteen analysointi ja ohjaus,
2006.
-
Hakkarainen, Aki.
Suunnittelujärjestelmän merkitys automaatioprojektin ja -kunnossapidon elinkaarihallinnassa,
2006.
-
Hurme, Jaana.
Tuotantolaitoksen informaatiojärjestelmien integrointi, esimerkkinä tilausten käsittely,
2006.
-
Kanninen, Kimmo.
Uuden tehokkuudensuunnittelutyökalun tuotteistaminen,
2006.
Master’s theses
2005
-
Kero, Jari-Matti.
Advanced messaging in enterprise scale maintenance system,
2005.
-
Ijäs, Päivi.
An approach to video surveillance systems based on computer vision and adaptive background algorithms,
2005.
-
Lehto, Aki.
Asfalttiaseman rumpukuivaimen säätö,
2005.
-
Lučan, Vladimír.
Bluetooth with industrial computers,
2005.
-
Hakala, Ari.
Developing a disposable liquid handling cartridge for a Point-of-Care device using polydimethylsiloxane,
2005.
-
Kreutzer, Joose.
Development of an actuation system for a portable blood analysis instrument,
2005.
-
Solante, Tero.
Digitaalisen laajakaistasuutimon perusrakenne ja vastaanottotestaus,
2005.
-
Salpavaara, Timo.
EMFi-kalvoon perustuva ultraäänitutka,
2005.
-
Heino, Arsi.
Erään hydraulipuristimen puristuslaadun kehittäminen,
2005.
-
Ekola, Teemu.
Fault management in mobile telecommunication networks,
2005.
-
Hakala, Tero.
Hybrid optimization algorithm based on genetic algorithm and simulated annealing : application to production scheduling of discrete state production systems,
2005.
-
Siuko, Jukka.
Kalibroinnin kokonaisepävarmuuden määrittämisen automatisointi,
2005.
-
Lindgren, Teemu.
Kenttälaitteiden parametritietojen hallinta paperitehtaalla,
2005.
-
Niemelä, Kari-Pekka.
Koeammuntojen paineenmittaustulosten panoskohtainen riippuvuus mittausmenetelmästä tykistön ampumatarvikkeilla,
2005.
-
Luomanpää, Jali-Matti.
Kombivoimalaitoksen simulointi ja prediktiivinen säätö,
2005.
-
Mäntylä, Timo.
Laatumittausjärjestelmän infrastruktuurin kehittäminen,
2005.
-
Heman, Hannu.
Machine automation in crushing plants,
2005.
-
Nieminen, Elina.
Mikroanturitutkimukseen soveltuvan puhdastilan ja fotolitografialaitteiston suunnittelu ja käyttöönotto,
2005.
-
Koivuniemi, Katja.
Model-based data analysis of microbial state in broke tower,
2005.
-
Syrjälä, Sami.
Ohjelmistoagentit teollisuuslaitosten poikkeustilanteiden hallinnassa,
2005.
-
Salonen, Raimo.
Operaattorin tilannetietoisuus,
2005.
-
Flytström, Tiina.
Palvelukeskeisen arkkitehtuurin (SOA) arviointi,
2005.
-
Annala, Jussi.
Paperin jälkikäsittelyn materiaalivirtojen simulointi: tehokkuusraportointi,
2005.
-
Mikkonen, Jarkko.
Purkujen ja purkusäiliön jälkeisen sakeuden hallinta,
2005.
-
Suomela, Tiina.
Puulajin tunnistus rungon värin ja tekstuurin perusteella,
2005.
-
Korpela, Timo.
Puupellettipolton mallintaminen säädön ja kunnonvalvonnan näkökulmasta,
2005.
-
Jylhä, Riikka.
Reaaliaikaisuustarpeet ja -mahdollisuudet maantieteellisesti hahautetussa automaatiossa,
2005.
-
Vanhala, Jari A.
Rotaatiovalumuotin pintalämpötilan mittaus valuprosessin aikana,
2005.
-
Märkjärvi, Ilpo.
Ruskean massan pesulinjan tasemallin ja tuotannon säädön kehitys,
2005.
-
Koistinen, Heikki.
Siirtotehtävien toteutus varastojärjestelmässä,
2005.
-
Lehto, Timo.
System theoretical analysis and fluid flow modeling of GPRS networks,
2005.
-
Kantanen, Juho.
Tarralaminaattileikkurin radan nopeus- ja kireyshallinnan parantaminen,
2005.
-
Helin, Tomi.
Tuotteen kysyntäilmiöö̈n liittyvän epävarmuuden tiheysfunktioennustaminen,
2005.
Master’s theses
2004
-
Jaakkola, Veli-Pekka.
An intelligent Web service for operation and maintenance,
2004.
-
Helanterä, Henri.
Analyysipalvelut globaalissa kunnonvalvontajärjestelmässä,
2004.
-
Suntila, Jaana.
EMFi-anturoitu tuoli fysiologisiin mittauksiin,
2004.
-
Karjalainen, Markku.
Kalanviljelylaitoksen virtausmittauksen automatisointi,
2004.
-
Elo, Timo.
Laiva-automaation hajautettu testaus,
2004.
-
Joro, Risto.
Merialusten tutkapoikkipinta-alan (RCS) määrittäminen,
2004.
-
Koponen, Jaakko.
Nykyaikaisen perusautomaatiotoimituksen projektoitavuuden kehittäminen,
2004.
-
Ahokangas, Tommi.
Packet switched domain interoperability between second and third generation mobile technologies,
2004.
-
Kärki, Satu.
Painekartoitusjärjestelmä fysiologisiin mittauksiin,
2004.
-
Ahonen, Toni.
Paperinvalmistusprosessin ajettavuuden seuranta prosessimuuttujien todennäköisyysjakautumiin perustuen,
2004.
-
Karinsalo, Tapio.
Puettavan lämpömittarin valmistettavuus ja kustannukset,
2004.
-
Brusila, Vesa.
Rotaatiovalukoneen ohjaus lämpötilamittauksen avulla,
2004.
-
Huovinen, Mikko.
Sellunkuivausprosessin suorituskykyseuranta,
2004.
-
Hakala, Tero.
Strategisen teknologia-allianssin muodostaminen ja kehitys,
2004.
-
Hoivassilta, Hannu.
Sähkön laadun mittausjärjestelmä,
2004.
-
Kinnunen, Mikko.
Teollisuusvoimalaitoksen höyryntuotannon hallinta,
2004.
-
Kumpulainen, Hannu.
Yritysteleverkon valvonta ja hallinta,
2004.
Master’s theses
2003
-
Tissari, Hannu.
Automaattisen varastojärjestelmän käyttöliittymän sovelluskehykset,
2003.
-
Illi, Mika.
Ceramec® kapillaarisuodattimen käänteispesujärjestelmän tutkiminen ja kehittäminen,
2003.
-
Ali-Löytty, Sami.
Condition monitoring of paper machine fabrics based on operation history,
2003.
-
Karppinen, Tero.
Design and implementation of synthetic environment management tool,
2003.
-
Novotný, Marek.
The design and the control of a linear motor drive for micropositioning,
2003.
-
Kilpi, Juha.
Development of a shape memory actuator for turbulent flow control,
2003.
-
Koskela, Panu.
GSM-puhelimen E-OTD-mittaustarkkuuden testausjärjestelmä,
2003.
-
Tuomela, Esko.
Kartonkikoneen modernit säädöt ja niistä saavutettavat hyödyt,
2003.
-
Lähteinen, Pasi.
Kilpailukykyä tieto- ja materiaalivirtoja tehostamalla,
2003.
-
Lepistö, Lasse.
Kuvaan perustuvan paperin formaation on-line-analysaattorin kehittäminen,
2003.
-
Anttila, Jukka.
Lineaarimallien käyttö staattisen epälineaarisuuden sisältäville järjestelmille,
2003.
-
Chang, Bo.
Microforce measurement system and experimental study of microforces in controlled environment,
2003.
-
Jäntti, Petri.
Optiset lämpötilamittausmenetelmät höyrykattilan tulipesäalueella,
2003.
-
Iso-Kuusela, Otto.
Sellutehtaiden tuotantolinjojen luotettavuuden analysointimenetelmä,
2003.
-
Lahti, Tomi.
Soft sensor -anturointiin perustuva kumin sekoitusprosessin viskositeettitason hallinta,
2003.
-
Kyrölä, Antero.
SoftPLC perinteisen PLC:n haastajana,
2003.
-
Känsälä, Sari.
Sähköinen alipaineimpaktori (ELPI): toiminnan varmentamisen ja tuotannon testauksen kehittäminen,
2003.
-
Laine, Petri.
Tehdasautomaation informaation hyödyntäminen ylätasojärjestelmässä,
2003.
-
Lauttamus, Kari.
Traktorin tuoteauditoinnin mittausjärjestelmän kehittäminen,
2003.
-
Jaatinen, Antti.
Virtausta säätävä magneettiventtiili,
2003.
-
Hämäläinen, Ari.
Voimalaitoksen korkeapainehöyryverkon hallinta,
2003.